four plugs three different reads

  • kzwolf
  • kzwolf's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

four plugs three different reads

07 Jun 2011 22:29
#456014
A brief history: Bought the dynojet kit, installed stage three for the aftermarket filters and muffler. Bike started and ran pretty dang good holding steady power, although not as much torque as I know it can have and revved to 6000 rpm almost touching 7 in fifth at about 75 mph. we synced the carbs all was good except for one which we found the vacuum diaphram was pulled down limiting the slide needle function. Fixed it took it on a country road ride and got caught in a rainstorm. Ran out of gas, bike was cold by the time we filled it up and it ran bogging out and fouling out the plugs. Now, replaced plugs, and it's sounding different, getting some backfire and when I pull the plugs, #1&2 plugs have oily gas residue, wet and black. The third plug is dark, dry, sooty. The fourth plug is white, dry, and the node is white.

I've been trying to get it right and just can't seem to remedy the problem, also I have yet to find a trustworthy mechanic to take it to.

Any advice is like gold thank you!!!
kzwolf

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: four plugs three different reads

07 Jun 2011 22:40
#456019
Year of bike? Model? Compression good? Original ignition coils? What brand of sparkplug?
Original ignition coils?
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
The following user(s) said Thank You: kzwolf

Please Log in or Create an account to join the conversation.

  • elfmagic17
  • elfmagic17's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 334
  • Thanks: 24

Re: four plugs three different reads

07 Jun 2011 22:47
#456022
Can you post some pics of the plugs right after you take them out, laying in cylinder order from left to right that may help with diagnosis. Maybe some sediment got into your bowls when your tank went dry and clogged some jets, might try flushing them out. Also may have got some wet air filters heard of this kind of problem with the pods. It could also have got into points and caused problems if the cover isn't sealed good just make sure you check them all for spark.
Kenny Hicks
74 Honda CB550
75 Honda CB360 (runs and rides good but not a show bike)
77 KZ650B1 (Runs Great, but needs painted and a little work.)
The following user(s) said Thank You: kzwolf

Please Log in or Create an account to join the conversation.

  • JR
  • JR's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Posts: 2981
  • Thanks: 500

Re: four plugs three different reads

07 Jun 2011 22:51 - 07 Jun 2011 22:52
#456023
Did you thoroughly dry out the pod air filters ?

I used to have pods. Got caught in a rain once and bike coughed, spluttered and f****d for the 50km (30 miles) ride home.. At times I felt I would'nt make it.

Might be a good idea to add your bike year and model to your signature.
1980 kz750E1, Delkevic exhaust
Last edit: 07 Jun 2011 22:52 by JR.
The following user(s) said Thank You: kzwolf

Please Log in or Create an account to join the conversation.

  • kzwolf
  • kzwolf's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: four plugs three different reads

07 Jun 2011 23:12
#456032
what's up thank you for the suggestions i'll take some photos of the plugs in the morning. it is the 83' kz 750 ltd, NGK 8ES spark plugs(i believe this is accurate). Cleaning out the ports again on the carbs is a good suggestion as I feel that there might be a lack in the pilot as the throttle bogs and dies after revving too fast.

air pod filters are dry.

I'm thinking the it was something with the points as well haven't checked, is that the gasket that has to be replaced with new after being removed?
need to check the plugs for sparks

Original ignition coils

thank you for your quick responses, it's such a killer not to be able to ride in this weather!!
thank you
ewn

Please Log in or Create an account to join the conversation.

  • kzwolf
  • kzwolf's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: four plugs three different reads

07 Jun 2011 23:17
#456035
forgot to mention did a compression test and they all checked out right at 160 except one was like 154
kzwolf

Please Log in or Create an account to join the conversation.

  • elfmagic17
  • elfmagic17's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 334
  • Thanks: 24

Re: four plugs three different reads

07 Jun 2011 23:23
#456039
kzwolf wrote:
I'm thinking the it was something with the points as well haven't checked, is that the gasket that has to be replaced with new after being removed?
need to check the plugs for sparks

Think if it doesn't tear when takin' apart i'd just reuse it unless you find moisture has leaked in, then replace it. Good luck, I can't think its something too hard if it ran fine till it ran out of gas.

Kenny.
Kenny Hicks
74 Honda CB550
75 Honda CB360 (runs and rides good but not a show bike)
77 KZ650B1 (Runs Great, but needs painted and a little work.)
The following user(s) said Thank You: kzwolf

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: four plugs three different reads

07 Jun 2011 23:28
#456040
It's probably time for new ignition components: New coils,sparkplug wires & caps as the parts are 28 years old....
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
The following user(s) said Thank You: kzwolf

Please Log in or Create an account to join the conversation.

  • kzwolf
  • kzwolf's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: four plugs three different reads

09 Jun 2011 13:19
#456321
We just got back into it, all plugs are getting fire and the two right plugs(as if you were sitting on the bike) are looking good, normal wear, but the left two have the oily residue, and the headers coming out of the left two cylinders are cold, the right two after a short idle were hot to the touch and we could grab the left two no prob. all four carbs are creating suction, as in they will suck your hand to the hole. we switched the red and green coil wires and plugged the opposite sides in and still no heat on the headers.

i just really don't know and i'm not an expert and the only shop around i just don't trust the dude cause he's money hungry so i don't want to get taken but i need to ride!!

thank you for the input
kzwolf

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: four plugs three different reads

09 Jun 2011 15:04
#456331
Tried changing the sparkplug leads(the ones that go on the sparkplugs) from one side to the other? Sometimes the "Cold Side" gets firing again indicating to me it's tome for new sparkplug wires/leads. The sparkplug caps have a resistor inside to control the electrical noise, these can go bad after a few years. www.z1enterprises.com sells new ones.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • kzwolf
  • kzwolf's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 13
  • Thanks: 0

Re: four plugs three different reads

09 Jun 2011 15:35
#456338
we switched two of the leads by unscrewing them and switching them and there didn't seem to be change plus all for are showing spark when we fire it and look, it seems possible that no fuel is getting to the left two?? my carbs about three weeks ago were rad it is so strange.

would i just switch the leads and fire it up again see if the headers get hot?
kzwolf

Please Log in or Create an account to join the conversation.

  • ed spangler
  • ed spangler's Avatar
  • Offline
  • User
  • User
    Registered
  • Tennessee Z
  • Posts: 512
  • Thanks: 29

Re: four plugs three different reads

09 Jun 2011 16:09
#456340
Have a similar problem on my 75 Z1-B 900 . Get a inexpensive "Laser " Heat detector ( Parts stores have them as cheap as $30!) start bike and shoot the beam at exhaust header pipe whre it exits the head, you will quickly see ( as I did ) which plugs are firing, after runs for minute say gets up to 180 degress on laser heat detector swap plugs that have been firing for ones that have not use Anti-Seize on plug threads. This approach works fine for me, after swapping the plugs the cylinders all "Light" and off I go, seems to happen to me when gas has been in tank for more than 30 days or bike has not been started for 30 days or so. Once I do this and get it going next day or in fact for several days or couple weeks after that bike will fire right up on all cylinders.
Hope this helps
Regards
ED
Have 1975 Kawasaki Z1-B & 2003 Harley Davidson Heritage Softail Classic
Had Hondas, Harleys and many ,many Z Series Kaws both Std. & LTD's

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum