Part Identification

  • stablechaser35
  • stablechaser35's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 24
  • Thanks: 0

Part Identification

08 Jun 2011 02:22
#456064
I was told that my 78 KZ1000 has a bad/broken "one-way clutch"... was told it is keeping the electric starter from being able to work... he might have said "one-way gear"... honestly, I don't know what this part is, but I know it whines when the bike is running and I really would like to fix/replace it so I don't have to kickstart it anymore... anyone know what I am talking about and if so what the proper name of the part is?

Thanks
"Not as good as I once was, but as good once as I ever was"... yeah right... don't have the back for that, I was AMAZING when I was younger, now I'm just here...

Please Log in or Create an account to join the conversation.

  • mtbspeedfreak
  • mtbspeedfreak's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1413
  • Thanks: 36

Re: Part Identification

08 Jun 2011 03:28
#456071
Please excuse my complete lack of technical terminology, please correct me. Possibly the solenoid is kicking the starter drive wheel, but not retracting it.
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!

If it has tits or tires, it'll give you problems!
The following user(s) said Thank You: stablechaser35

Please Log in or Create an account to join the conversation.

  • stablechaser35
  • stablechaser35's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 24
  • Thanks: 0

Re: Part Identification

08 Jun 2011 03:36
#456074
mtbspeedfreak wrote: Please excuse my complete lack of technical terminology, please correct me. Possibly the solenoid is kicking the starter drive wheel, but not retracting it.
yep, those words sound better to my ears... I kinda thought I knew what the guy meant, but wasn't sure he had the right name for the parts... gotta a feeling it would just be easier to pull it apart and actually look at it for myself then maybe I can get a better guess as to what exactly it is... thanks for your help... that makes more sense than what I was originally told
"Not as good as I once was, but as good once as I ever was"... yeah right... don't have the back for that, I was AMAZING when I was younger, now I'm just here...

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: Part Identification

08 Jun 2011 04:36
#456081
are you talking about the starter clutch? B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
The following user(s) said Thank You: stablechaser35

Please Log in or Create an account to join the conversation.

  • Jeff.Saunders
  • Jeff.Saunders's Avatar
  • Offline
  • Vendor
  • Vendor
    Vendors
  • Posts: 1238
  • Thanks: 149

Re: Part Identification

08 Jun 2011 10:35
#456121
It would be the starter clutch. This is a 'one-way gear'. This is known as a sprag gear. Often the mechanism gums up with old oil, or the rollers get scored and won't grab.
The following user(s) said Thank You: stablechaser35

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Part Identification

08 Jun 2011 13:55
#456145
Over Running Starter Clutch Repair On the Older, Bigger 4’S

1. When preparing to repair the starter over running clutch have a few items on hand:

A. New alternator cover gasket.
B. New springs (3).
C. New spring caps (3).
D. New rollers (3).

2. If possible, put the motorcycle on the center stand and tilt to the right to reduce the oil volume in the alternator cover.

3. Place an oil catch pan under the left side of the engine to collect what small amount of oil that will escape when the alternator cover is removed.

4. Remove the foot shifter lever, left foot peg assembly and the sprocket cover.

5. Some Kawasaki’s have socket head cap screws(Allen type) and others may have fasteners with a Phillips type. If the latter is there, a # 3 bit seems to work the best for removal.

6. Remove the alternator cover and take care with the three wires coming from the alternator stator. These are the voltage supply wires for the motorcycle. Rest the cover on some newspaper or rags to prevent damage.

7. The magnetic Rotor or flywheel will probably require a removal bolt or puller. NOTE, SOME ENGINES HAVE LEFT HAND THREADS ON THE ROTOR!!


8. The over running clutch is bolted to the back of the rotor with three Allen head fasteners.

9. Separate the rotor from the over running clutch and inspect for damage in the springs, rollers, and spring caps. Replace any worn parts.

10. Re-assemble in reverse order taking care when re-installing the Alternator cover not to pinch any wires. If the cover will not re-install without force, check before any damage occurs.

11.One caution. These tend to get the skips and have difficulty with the one way clutch on the starter holding once they have been taken apart if the old parts are reused. They may not look that worn, but as a matter of course I would replace the entire part # 13193-1006 and part # 92026-112.

12,Also, if you presently have a follow-on rattle or growl once the bike has started take a good look at the starter motor gear, Part # 21167-002, and the pin on which it rotates. That gear and pin tends to wear the center bearing surface after only thirty or so years and then cocks under load and puts the starter clutch assembly in a bind causing it to skip or rattle. One problem looks like the other.

13.Use assembly lube when putting the starter gear back together with the pin.

14. Read this procedure from Red Line Cycle:
redlinecycle.com/Starter%20Clutch%20Tech.html
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
The following user(s) said Thank You: stablechaser35

Please Log in or Create an account to join the conversation.

  • stablechaser35
  • stablechaser35's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 24
  • Thanks: 0

Re: Part Identification

08 Jun 2011 20:22
#456196
Jeff.Saunders wrote: It would be the starter clutch. This is a 'one-way gear'. This is known as a sprag gear. Often the mechanism gums up with old oil, or the rollers get scored and won't grab.

I would've quoted Mfolks as well, but that is pretty long... lol... all answers are very helpful and appreciated... I'm sure I'll end up being the dumbass with too many questions but as I get them answered, then I'll be able to helo someone with even less know-how than me... :whistle: thanks to all again, now I know
"Not as good as I once was, but as good once as I ever was"... yeah right... don't have the back for that, I was AMAZING when I was younger, now I'm just here...

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Part Identification

08 Jun 2011 20:47
#456203
That's the right attitude! Keep asking! :)

Please Log in or Create an account to join the conversation.

  • stablechaser35
  • stablechaser35's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 24
  • Thanks: 0

Re: Part Identification

09 Jun 2011 13:58 - 09 Jun 2011 13:59
#456326
DoubleDub wrote: That's the right attitude! Keep asking! :)

I'm glad someone understood what I was trying to say... sometimes I get thoughts crossed and it doesn't come across the same on the puter... probably the pain meds for my back... lol... one more quick question though, where can I find those parts for less than my right arm??
"Not as good as I once was, but as good once as I ever was"... yeah right... don't have the back for that, I was AMAZING when I was younger, now I'm just here...
Last edit: 09 Jun 2011 13:59 by stablechaser35.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: Part Identification

09 Jun 2011 14:28
#456330
www.z1enterprises.com would be the first place for me to go to, other people have used www.bikebandit.com or maybe www.redlinecycle.com
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
The following user(s) said Thank You: stablechaser35

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum