Kz650 to 700cc pinging?
- doped304
-
Topic Author
- Offline
- User
-

Registered
- Posts: 65
- Thanks: 0
Kz650 to 700cc pinging?
08 Jun 2011 19:53
I just got off the phone with the machine shop and one my cylinders is just out of spec enough to warrant new rings. From what I have read 650 rings are a hot commodity these days. My next option is a wiseco 700 piston kit. I am concerned about detonation, I live in a hot location and I have been down the mix in race gas road before on my rd400. Has anyone ran this setup before on a 650? Is the step up in compression a recipe for disaster?I got a stock unported head with a new valve job and guides, 4 into 1 with an airbox on stock cams and carbs. Just want to get it running without having to tear into again due to a smoking cylinder! Thanks.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Kz650 to 700cc pinging?
08 Jun 2011 20:07 - 08 Jun 2011 20:10
"... one my cylinders is just out of spec enough to warrant new rings"? If the cylinders are out of spec wouldn't you need to bore them? In that case, you would need new rings and pistons; so your choices would also include going to the next KZ650 oversize. If the shop is saying the cylinders are so close that honing is sufficient, then you can probably get away with rings only.
Another option: If it's just the one cylinder how about just replacing the sleeve?
Ed
Another option: If it's just the one cylinder how about just replacing the sleeve?
Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 08 Jun 2011 20:10 by 650ed.
Please Log in or Create an account to join the conversation.
- doped304
-
Topic Author
- Offline
- User
-

Registered
- Posts: 65
- Thanks: 0
Re: Kz650 to 700cc pinging?
09 Jun 2011 00:28
Not a bad idea since there were just out on accident! I PJ1ed my jugs and stuck them in my oven to bake on. Came back in an hour and there they were all sticking out. So I made some shims under the cylinders and reheated and they fell back in. I am not opposed to the wiseco kit, I actually want it but this bike is by no means gonna set the world on fire. I just want something I can ride with out all of the head aches of some high compression nightmare. I just want some feed back once I am past the point of no return.
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-

Registered
- Posts: 2272
- Thanks: 512
Re: Kz650 to 700cc pinging?
09 Jun 2011 18:56
You will be fine using the 700 cc pistons. They should be 10.25-1 and will run fine on regular pump gas.
Please Log in or Create an account to join the conversation.
- doped304
-
Topic Author
- Offline
- User
-

Registered
- Posts: 65
- Thanks: 0
Re: Kz650 to 700cc pinging?
09 Jun 2011 19:02
What are my options on the wiseco kit down the line? Are there oversized rings available or is this a one time setup? Will I see any sizeable performance gains, or will it just run like a fresh 650 from the factory?
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
