Plug reading assitance
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Plug reading assitance
11 Jun 2011 11:47 - 11 Jun 2011 11:56
Here are my plugs. 82 550 LTD. issues I am having: Pipe crackling while hard shifting (de-accel) and when over 50 mph and dump to WOT, it bogs then takes off. Bog is worse with any choke on.
My camera was having a hard time with getting all of the focused w/ good light, so I got one of them all facing one way, another facing the other way, then a shot of the 1,2 and a shot of 3,4. (1 being on the left).
What do you guys think?
[attachment:1]plug 1_small_edited-2.jpg[/attachment]
My camera was having a hard time with getting all of the focused w/ good light, so I got one of them all facing one way, another facing the other way, then a shot of the 1,2 and a shot of 3,4. (1 being on the left).
What do you guys think?
[attachment:1]plug 1_small_edited-2.jpg[/attachment]
Last edit: 11 Jun 2011 11:56 by apbling.
Please Log in or Create an account to join the conversation.
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
11 Jun 2011 11:52 - 11 Jun 2011 11:55
pic loading issues...standby...
Last edit: 11 Jun 2011 11:55 by apbling.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Plug reading assitance
11 Jun 2011 11:56
Cant see the picture but usually bogging denotes a midrange rich situation and sputtering denotes a lean situation. You have those funky CR carbs with the extra set of jets. I hope that someone that has a 550 with those chimes in. Where are you Lou when we need you?
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
11 Jun 2011 11:58
Hehe, Lou has been a godsend!
CR carbs? No, TK carbs with one less jet actually. There is only two. The pilot and the main.
CR carbs? No, TK carbs with one less jet actually. There is only two. The pilot and the main.
Please Log in or Create an account to join the conversation.
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
11 Jun 2011 12:02 - 11 Jun 2011 12:25
Is there some kind of total picture quota? I sized my pics all the way down below 300k and still won't load!
Lets try this picasa thing...(click the bottom blue link)
<table style="width:194px;"><tr><td align="center" style="height:194px;background:url( picasaweb.google.com/s/c/transparent_album_background.gif ) no-repeat left"><a href=" picasaweb.google.com/apbling/Plugs?authk...ZQ&feat=embedwebsite "><img src=" lh3.googleusercontent.com/-A1UXPiSpe3M/T...7xM/s160-c/Plugs.jpg " width="160" height="160" style="margin:1px 0 0 4px;"></a></td></tr><tr><td style="text-align:center;font-family:arial,sans-serif;font-size:11px"><a href=" picasaweb.google.com/apbling/Plugs?authk...ZQ&feat=embedwebsite " style="color:#4D4D4D;font-weight:bold;text-decoration:none;">Plugs</a></td></tr></table>
Lets try this picasa thing...(click the bottom blue link)
<table style="width:194px;"><tr><td align="center" style="height:194px;background:url( picasaweb.google.com/s/c/transparent_album_background.gif ) no-repeat left"><a href=" picasaweb.google.com/apbling/Plugs?authk...ZQ&feat=embedwebsite "><img src=" lh3.googleusercontent.com/-A1UXPiSpe3M/T...7xM/s160-c/Plugs.jpg " width="160" height="160" style="margin:1px 0 0 4px;"></a></td></tr><tr><td style="text-align:center;font-family:arial,sans-serif;font-size:11px"><a href=" picasaweb.google.com/apbling/Plugs?authk...ZQ&feat=embedwebsite " style="color:#4D4D4D;font-weight:bold;text-decoration:none;">Plugs</a></td></tr></table>
Last edit: 11 Jun 2011 12:25 by apbling.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Plug reading assitance
11 Jun 2011 12:16
Definitely running rich no doubt but one thing noticing is heat range on 1/3 plug ground straps (
) running hot! Matched coil pairs I'd possibly understand.
Maybe this will help out....
reading-spark-plugs-correctly
Attachment SparkPlugBase.JPG not found
Maybe this will help out....
reading-spark-plugs-correctly
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
11 Jun 2011 12:24
Well, I should have mentioned that these plugs where blacker... When we put the top end back together these were the plugs that were in it and burnt alot of oil we used to lube all the pieces up. They cleaned up, but remained to look like this.
I'm not following what your saying... The strap says I'm hot (which makes me think lean) but yet I'm rich? Maybe a new set of plugs and some ass time might clarify where I'm at?
I'm not following what your saying... The strap says I'm hot (which makes me think lean) but yet I'm rich? Maybe a new set of plugs and some ass time might clarify where I'm at?
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Plug reading assitance
11 Jun 2011 12:31
Keep in mind... As Otto mentioned combo of the two. Pending carb jetting/conditions you can be real rich on the idle side but lean on mid-WOT range...
Sparky 1, hard to say w/out zoom but strap looks as though it's starting to pit/deteriorate. On the porcelain, are you seeing speckles thus depicting pre-detonations?
Ignition timing spot on...
Sparky 1, hard to say w/out zoom but strap looks as though it's starting to pit/deteriorate. On the porcelain, are you seeing speckles thus depicting pre-detonations?
Ignition timing spot on...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
11 Jun 2011 12:44 - 11 Jun 2011 12:45
hmm, good point. I'll got take a peek.
If I had to bet/hope, I'd think that it might be lean on idle and rich at WOT. Problem is, I can't adjust the WOT because my need is fixed type...
As for speckles, no, the porcelain is just dark colored, no speckles. The strap looks kinda crusty, but I wouldn't say pitted or deteriorated.
Also, take the darkness w/ a grain of salt because my camera makes it look a little darker than what I see in person. Can't get the damn flash to work. Stupid thousand dollar camera can do all sorts of things except take a damn picture!
Weird how 1/3 both show this...
If I had to bet/hope, I'd think that it might be lean on idle and rich at WOT. Problem is, I can't adjust the WOT because my need is fixed type...
As for speckles, no, the porcelain is just dark colored, no speckles. The strap looks kinda crusty, but I wouldn't say pitted or deteriorated.
Also, take the darkness w/ a grain of salt because my camera makes it look a little darker than what I see in person. Can't get the damn flash to work. Stupid thousand dollar camera can do all sorts of things except take a damn picture!
Weird how 1/3 both show this...
Last edit: 11 Jun 2011 12:45 by apbling.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Plug reading assitance
11 Jun 2011 12:58 - 11 Jun 2011 13:00
Well plugs are cheap @ $2.50 each....
Verify/adjust ignition timing with a new set of plugs....
Once warmed, no choke take her for a spin...
1) Hold @ 65mph.... She struggle, surge back and forth a tad then she's lean.
2) @ 65mph, let go of the throttle and let her snap back... Exhaust popping then yup, lean.
3) @ 65mph, twist the throttle, she hesitate, burp etc.... I think you see where this is going....
Maybe this will give you some insight....
This is the Keihin CR T-Shoot guide but pretty much the same for all mechanical crabs I believe anyways....
Out of the OEM KZ900 manual...
Good luck,
OMR
Verify/adjust ignition timing with a new set of plugs....
Once warmed, no choke take her for a spin...
1) Hold @ 65mph.... She struggle, surge back and forth a tad then she's lean.
2) @ 65mph, let go of the throttle and let her snap back... Exhaust popping then yup, lean.
3) @ 65mph, twist the throttle, she hesitate, burp etc.... I think you see where this is going....
Maybe this will give you some insight....
This is the Keihin CR T-Shoot guide but pretty much the same for all mechanical crabs I believe anyways....
Out of the OEM KZ900 manual...
Good luck,
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 11 Jun 2011 13:00 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
11 Jun 2011 17:18
Thanks OMR. That is a nice little writeup. I kinda knew in the back of my head some of those symptoms, but nice to see them all laid out like that.
Whats odd is your #3 is what occurs to me, but it gets worse with the choke cracked on. It's almost like the "Rich jetting symptoms and solutions, #3".
Problem is, aside from float height, theres no way to adjust the mains... and it's all stock.
Whats odd is your #3 is what occurs to me, but it gets worse with the choke cracked on. It's almost like the "Rich jetting symptoms and solutions, #3".
Problem is, aside from float height, theres no way to adjust the mains... and it's all stock.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Plug reading assitance
11 Jun 2011 18:15 - 11 Jun 2011 18:26
I get a conflicting story when reading through this post. You say you have the TK22 Carbs with a Main and Pilot jet, then at the end you say the only adjustment is the fuel level?
Take a look at the picture, from this link: www.cyclepartsnation.com/pages/OemParts#...50-C3-1982/080122I-8
There is a list with all the parts. You have several jets in the carb that could be Incorrect or modified. By this I mean that they can be drilled to a different size or damaged by cleaning with a set of Torch Tip Cleaners sold as carb cleaners. Just because a # is stamped doesn't always mean it is correct.
See in the Pic where the Needle Jet is in the slide valve? What position is the clip set to, there is grooves, 1-5.
Also with the coil problems are you certain that you have good voltage reaching the coils? Whats the Main fuse Look like in the fuse box, signs of heat on the wires going in and out of the main 20 amp fuse?
Does this Bike Have Pod Air Filters? Or did it in the past and the carbs set for them?
Take a look at the picture, from this link: www.cyclepartsnation.com/pages/OemParts#...50-C3-1982/080122I-8
There is a list with all the parts. You have several jets in the carb that could be Incorrect or modified. By this I mean that they can be drilled to a different size or damaged by cleaning with a set of Torch Tip Cleaners sold as carb cleaners. Just because a # is stamped doesn't always mean it is correct.
See in the Pic where the Needle Jet is in the slide valve? What position is the clip set to, there is grooves, 1-5.
Also with the coil problems are you certain that you have good voltage reaching the coils? Whats the Main fuse Look like in the fuse box, signs of heat on the wires going in and out of the main 20 amp fuse?
Does this Bike Have Pod Air Filters? Or did it in the past and the carbs set for them?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 11 Jun 2011 18:26 by Motor Head.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
