Plug reading assitance
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
11 Jun 2011 21:58
My needles do not have grooves. I think the US version didn't and had the air/fuel pilots valve plugged off for tampering. I'm running stock airbox (and it never had pods) and the jets are all stock jets from rebuild kits. I used these same jets in the past and didn't have this problem, so I don't think they have been messed with.
The coil problems were on my 750, not the 550. The 550 graciously donated it's coils to my 750 until the new coils get ordered. My 550 a couple years ago had (for some reason) a really low float on #2 and coupled with a vacuum leak and a dipshit owner (me) holed a piston. I have since repaired the motor and have the carbs set up to proper float heights and all stock settings and passages clean etc.
UNLESS (Lou help me here) the jet numbering between the oem jets and the keyster rebuild kits aren't 100% the same...?
The coil problems were on my 750, not the 550. The 550 graciously donated it's coils to my 750 until the new coils get ordered. My 550 a couple years ago had (for some reason) a really low float on #2 and coupled with a vacuum leak and a dipshit owner (me) holed a piston. I have since repaired the motor and have the carbs set up to proper float heights and all stock settings and passages clean etc.
UNLESS (Lou help me here) the jet numbering between the oem jets and the keyster rebuild kits aren't 100% the same...?
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Plug reading assitance
11 Jun 2011 22:26
Sorry about that Apbling. Did you pull out those little plugs that cover the Mixture screws from the factory? #90266 in the Picture.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- apbling
-
Topic Author
- Offline
- User
-

Registered
- Posts: 999
- Thanks: 12
Re: Plug reading assitance
12 Jun 2011 11:16
no problem.
Yes, I pulled the plugs and have cleaned the passages and such. Set them back to the stock setting.
Yes, I pulled the plugs and have cleaned the passages and such. Set them back to the stock setting.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
