Question about Exhaust Pipe Expansion?
- AndySlick
-
Topic Author
- Offline
- User
-

Registered
- Been riding since age 13
- Posts: 15
- Thanks: 0
Question about Exhaust Pipe Expansion?
12 Jun 2011 12:56
I have a Kz 440, 1983, single exhaust.
I took out the baffler about two weeks ago. It was way to loud, so I put it back on. But the original bolt shaked itself loose an hour into my ride. So I pushed in the baffle with my foot until I could get to a hardware store.
Again, I bought another bolt and this time a nut. I tightened them on pretty tight, and 2 miles into my journey, again those fell out.
- So, I went and bought 4 reinforced steel bolts and nuts. I had to hand tighten the first ones i put on, they also fell out an hour into the ride. so I Put one of those one very very tightly, as tight as I could get it. And havent riden it since.
My question is why is this now happening? I know that exhaust pipes expand with heat so it could slowly shake the nut off, but since the holes are threaded, the bolt itself should not come out I would think. The threaded hole is also cross-threaded, originally I thought that the hole had become so sharp that it was slicing the smaller bolts I used, and breaking them. I doubt that is the case though, very doubtful.
I took out the baffler about two weeks ago. It was way to loud, so I put it back on. But the original bolt shaked itself loose an hour into my ride. So I pushed in the baffle with my foot until I could get to a hardware store.
Again, I bought another bolt and this time a nut. I tightened them on pretty tight, and 2 miles into my journey, again those fell out.
- So, I went and bought 4 reinforced steel bolts and nuts. I had to hand tighten the first ones i put on, they also fell out an hour into the ride. so I Put one of those one very very tightly, as tight as I could get it. And havent riden it since.
My question is why is this now happening? I know that exhaust pipes expand with heat so it could slowly shake the nut off, but since the holes are threaded, the bolt itself should not come out I would think. The threaded hole is also cross-threaded, originally I thought that the hole had become so sharp that it was slicing the smaller bolts I used, and breaking them. I doubt that is the case though, very doubtful.
Please Log in or Create an account to join the conversation.
- btchalice
-
- Offline
- User
-

Registered
- Posts: 760
- Thanks: 7
Re: Question about Exhaust Pipe Expansion?
12 Jun 2011 16:10
try a bolt with a nylock nut it shouldnt vibrate out
Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Question about Exhaust Pipe Expansion?
12 Jun 2011 16:34
I doubt that it is thermal oscillation. It is going to be vibration.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 15 Feb 2013 10:10 by martin_csr.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
