GPZ Flywheel removal
- mickowa
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
GPZ Flywheel removal
13 Jun 2011 09:04
How ya going, I'm trying to take the flywheel off the crank and it doesn't wanna play ball. I've tried with the bolt/puller straight onto the end of the crank with no success, then tried putting a ball bearing in first to reduce friction and also heating up the flywheel hub and using a rattle gun on the bolt and still no good, it seems really tight even starting to stretch the puller bolt - any suggestions really welcome.
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: GPZ Flywheel removal
13 Jun 2011 09:28
The way you are going is the only way I know of. They can get quite stubborn but they do come off. Be careful when you heat up the hub, so you do not overheat the magnets. If you overheat them, you might as well cut it off.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Please Log in or Create an account to join the conversation.
- mickowa
-
Topic Author
- Offline
- User
-

Registered
- Posts: 11
- Thanks: 0
Re: GPZ Flywheel removal
13 Jun 2011 09:43
Thanks....luckily iv'e got two to play with the one I'm trying first already had broken magnets with afew more after I tried persuading it to come off with a hammer, won't be doing that with the good one, I'll keep trying thanks a.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
