Sprocket fun!
- royalratch
-
Topic Author
- Offline
- User
-

Registered
- Posts: 144
- Thanks: 10
Sprocket fun!
14 Jun 2011 09:29 - 06 Jul 2013 06:34
Need some help on this guys.
I am doing an 810 conversion with all tuned carbs and free flow exhaust so am expecting a bit more horsepower than that 1980+ KZ750-4 it's based on.
My questions are these:
1) What is the STOCK front and rear sprocket size?
2) (The grade school maths part!) If I have more power, smaller wheels (17") and want to run an extra tooth on the front - what is should my rear sprocket be?
I'm not into changing the character of the bike too much or chasing top speed - that said, I don;t want to run out of revs too early. I guess I just want it as close to stock as possible in ride character after factoring the extra power, wheel size and extra tooth on front.
I am doing an 810 conversion with all tuned carbs and free flow exhaust so am expecting a bit more horsepower than that 1980+ KZ750-4 it's based on.
My questions are these:
1) What is the STOCK front and rear sprocket size?
2) (The grade school maths part!) If I have more power, smaller wheels (17") and want to run an extra tooth on the front - what is should my rear sprocket be?
I'm not into changing the character of the bike too much or chasing top speed - that said, I don;t want to run out of revs too early. I guess I just want it as close to stock as possible in ride character after factoring the extra power, wheel size and extra tooth on front.
Last edit: 06 Jul 2013 06:34 by royalratch.
Please Log in or Create an account to join the conversation.
- martin_csr
-
- Offline
- User
-

Registered
- Posts: 7993
- Thanks: 1648
Last edit: 15 Feb 2013 10:11 by martin_csr.
The following user(s) said Thank You: royalratch
Please Log in or Create an account to join the conversation.
- royalratch
-
Topic Author
- Offline
- User
-

Registered
- Posts: 144
- Thanks: 10
Re: Sprocket fun!
14 Jun 2011 12:30
Cheers dude - I'll investigate and post anything useful here.
Please Log in or Create an account to join the conversation.
- Kidkawie
-
- Offline
- User
-

Registered
- I bleed premix
- Posts: 1924
- Thanks: 246
Re: Sprocket fun!
14 Jun 2011 13:22
You should email Z1E about what sprocket changes you're doing. I went one tooth up on my front sprocket but didn't realize I needed to add shims to space it away from the case. Luckily they told me I needed them before I placed the order.
1975 Z1 900
1994 KX250 Supermoto
2004 KX125
1994 KX250 Supermoto
2004 KX125
Please Log in or Create an account to join the conversation.
- royalratch
-
Topic Author
- Offline
- User
-

Registered
- Posts: 144
- Thanks: 10
Re: Sprocket fun!
14 Jun 2011 13:51
I'm probably gonna get a custom offset sprocket as I have a wider rear tyre fitted so that should be okay.
Please Log in or Create an account to join the conversation.
- royalratch
-
Topic Author
- Offline
- User
-

Registered
- Posts: 144
- Thanks: 10
Re: Sprocket fun!
16 Jun 2011 06:53 - 24 Sep 2011 06:14
So I'v been messing with gearingcommander.com
I've entered my updates details into it from stock - mainly a smaller rear wheel. Total rear wheel circumference is important, my smaller wheel will rotate slower than the stock 18".
Also, I'm going big on the front sprocket to 16T to counter the limitation of a 36T on the rear, as that's the smallest my Talon SuperMoto hubs will accept.
So here are the figures.
How do these figures look to everyone? A stock 750 puts out around 65-70bhp from the engine? an 810cc with headwork, sports exhaust and electronic tweaks will maybe do 90bhp?
I've tried to get the figures close to stock and just enjoy the extra bhp but the top speed appears to be quite a bit taller.
Also, what I'm mainly concerned about is in gear acceleration and rev limit. I want to thrash but don;t want the gears to run out of puff quickly.
I've entered my updates details into it from stock - mainly a smaller rear wheel. Total rear wheel circumference is important, my smaller wheel will rotate slower than the stock 18".
Also, I'm going big on the front sprocket to 16T to counter the limitation of a 36T on the rear, as that's the smallest my Talon SuperMoto hubs will accept.
So here are the figures.
How do these figures look to everyone? A stock 750 puts out around 65-70bhp from the engine? an 810cc with headwork, sports exhaust and electronic tweaks will maybe do 90bhp?
I've tried to get the figures close to stock and just enjoy the extra bhp but the top speed appears to be quite a bit taller.
Also, what I'm mainly concerned about is in gear acceleration and rev limit. I want to thrash but don;t want the gears to run out of puff quickly.
Last edit: 24 Sep 2011 06:14 by royalratch.
Please Log in or Create an account to join the conversation.
- royalratch
-
Topic Author
- Offline
- User
-

Registered
- Posts: 144
- Thanks: 10
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Sprocket fun!
24 Sep 2011 09:17
My preference is whatever gearing allows barely attaining red line rpm in top gear.
Some folks desire a more relaxed cruising rpm that won't reach red line in top gear, and don't mind the accompanying reduced maximum acceleration.
Good Fortune!
Some folks desire a more relaxed cruising rpm that won't reach red line in top gear, and don't mind the accompanying reduced maximum acceleration.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- royalratch
-
Topic Author
- Offline
- User
-

Registered
- Posts: 144
- Thanks: 10
Re: Sprocket fun!
24 Sep 2011 09:40
Makes sense - looking at the two sets of figures above - can anyone tell me how differently the custom will ride?
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
