gear ratio

  • jacksdad
  • jacksdad's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 1979 kz 750 OUCH, IT SPARKED
  • Posts: 161
  • Thanks: 2

gear ratio

24 Jun 2011 01:13 - 24 Jun 2011 01:14
#459069
Yesterday at work, I was telling a friend how much I ove to ride the 1979 kz 750 twin that I bought for 300 dollars, when he asked me how it rides, I said great, except that she really has a hard time getting over 65 miles perhour at about 6500 rpm, he said that the gear ratio could have been lowered to save gas mileage,and that it could be changed back by pulling the trans. and turning some nut, or screw, is this true, or is the Harley nut that I work with full of it, if it is true, then I know what I am doing this winter. thanks in advance
Dave
1979 kz750 twin cyl.
Last edit: 24 Jun 2011 01:14 by jacksdad.

Please Log in or Create an account to join the conversation.

  • martin_csr
  • martin_csr's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7993
  • Thanks: 1648

Re: -

24 Jun 2011 01:42 - 15 Feb 2013 10:30
#459072
.
Last edit: 15 Feb 2013 10:30 by martin_csr.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: gear ratio

24 Jun 2011 01:46
#459073
Th only way I'm aware of to change gear ratio's is to replace the front and rear sprockets & possibly the drive chain if it's worn.

www.gearingcommander.com will list new ratio's if you want to increase the top speed. Doing so may require slipping the clutch when pulling away as the new ratio may be "Taller".
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: gear ratio

24 Jun 2011 07:22
#459078
jacksdad wrote: ...1979 kz 750 twin...has a hard time getting over 65 miles per hour at about 6500 rpm....

6500 rpm seems too high for 65 mph.

:unsure: In which gear is the bike being ridden when going 65 mph at 6500 rpm?

Maybe the clutch is slipping.
:unsure: Has the clutch push rod adjustment been performed?

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • jacksdad
  • jacksdad's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 1979 kz 750 OUCH, IT SPARKED
  • Posts: 161
  • Thanks: 2

Re: gear ratio

24 Jun 2011 10:52
#459108
thats in fifth gear, no i have not done anythng with the clutch, except adjust where it releases via the adjustment at mid cable.
1979 kz750 twin cyl.

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: gear ratio

24 Jun 2011 12:36
#459126
Should be roughly 4500 rpm at 65 mph with 16/38 sprockets.

If your bike has a hard time getting past 65 mph then it has a serious engine problem.
I run 17/37 on a 79 750B and have no trouble running at least 100 mph.
KD9JUR

Please Log in or Create an account to join the conversation.

  • jydog
  • jydog's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 300
  • Thanks: 9

Re: gear ratio

26 Jun 2011 15:35
#459479
Im planning on running a 15/42 sprocket 530 chain for a 2.8 ratio is that too low? www.gearingcommander.com shows about 500 rpm higher than stock is that true?
81 KZ1000 LTD
Griffin GA

Please Log in or Create an account to join the conversation.

  • ELCouz
  • ELCouz's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 376
  • Thanks: 5

Re: gear ratio

26 Jun 2011 15:59
#459483
Im planning on running a 15/42 sprocket 530 chain for a 2.8 ratio is that too low? www.gearingcommander.com shows about 500 rpm higher than stock is that true?

This is the beauty of sprockets (chain drive) you can try it to have it to your taste...some prefer higher ratio (higher acceleration) or lower ratio (higher Top speed)

For me i like it stock... it depends on your taste!
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum