SOB - SOT - SUB

  • Patton
  • Patton's Avatar Topic Author
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

SOB - SOT - SUB

02 Jul 2011 17:36 - 02 Jul 2011 17:38
#460663
When describing valve shim location, have noticed that "SOB" is sometimes intended as "Shim-On-Bottom," perhaps interchangeably with "SUB" for "Shim-Under-Bucket," but is at other times intended as "Shim-Over-Bucket," perhaps interchangeably with "SOT" for Shim-On-Top.

On a stock KZ1000, the shims are located between the cam and bucket, where cams touch shims without touching buckets. On various other models, cams touch buckets without touching shims.

In a recent thread, racer54 asks about maximum lift in a stock KZ1000 before needing to go to SOB valve gear, where SOB is interpreted to mean Shim-On-Bottom, which interpretation APE Jay adopts in explaining how a taller cam may cause the shim to tilt with shim on top.

:unsure: Am guessing this means that the correct acronyms are either SOB for Shim-On-Bottom or SOT for Shim-On-Top, and that it's incorrect or a misnomer to use SOB as meaning Shim-Over-Bucket.

And SUB is mostly for firing torpedoes. :lol:

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 02 Jul 2011 17:38 by Patton.

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: SOB - SOT - SUB

02 Jul 2011 18:54
#460674
I thought SOB was shim over bucket. maybe we should just go with "over" and "under".
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • KZ_Rage
  • KZ_Rage's Avatar
  • Offline
  • User
  • User
    Registered
  • Kentucky Bourbon Barrel Ale
  • Posts: 891
  • Thanks: 19

Re: SOB - SOT - SUB

02 Jul 2011 19:16
#460676
SOB = shim over bucket to me, or someone I don't like very well... :evil:

This is why I hate acronyms, too many overlaps in meanings depending on where you live, work, etc.
1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)

Please Log in or Create an account to join the conversation.

  • racer54
  • racer54's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1902
  • Thanks: 114

Re: SOB - SOT - SUB

02 Jul 2011 19:18
#460677
I always took it as being... S.O.T was shim on top ...and S.O.B...was shim on bottom!
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110

Please Log in or Create an account to join the conversation.

  • APE Jay
  • APE Jay's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: SOB - SOT - SUB

02 Jul 2011 21:00
#460683
racer54 wrote: I always took it as being... S.O.T was shim on top ...and S.O.B...was shim on bottom!

That's the way it has always been. However, I just realized that sob could be interpreted to be shim over bucket. Never heard that before.

Please Log in or Create an account to join the conversation.

  • zed1015
  • zed1015's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3375
  • Thanks: 2084

Re: SOB - SOT - SUB

03 Jul 2011 07:22
#460717
You guys like to make things complicated don't you ? :laugh:

Over here it's always been -

S,O,B = Shim over bucket

And

S,U,B = Shim under bucket.

'S' and 'B' being the correct constants for the subject matter ;) .
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
www.kzrider.com/forum/23-for-sale/611992...lide-mikunis?start=1






Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: SOB - SOT - SUB

03 Jul 2011 12:34
#460752
That's why I've always spelled it out. Seen it confused too many times.

I've always seen them described as shim-over-buckets, in magazines, etc., but never seen "SOB" used as an abbreviation for shim-over-buckets, only shim-on-bottom. Obviously, it's easy to see why people would come to the wrong conclusion.

Please Log in or Create an account to join the conversation.

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6071
  • Thanks: 225

Re: SOB - SOT - SUB

03 Jul 2011 12:40
#460753
I for one... like NADs have removed the shims and welded in the bucket spacing.... No shims to worry about that way.... :blink:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum