The Kerkimura Header

  • EricHa
  • EricHa's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 138
  • Thanks: 1

The Kerkimura Header

07 Jul 2011 15:25 - 07 Jul 2011 15:26
#461543
I finally got around to starting this project, so I thought I would share. I wanted to try a straight diameter tailpipe (ala Yosh) on the end of a more available collector. I decided to try it on one of my Kerkers, as the collector outlet was a decent 2.5". V&H are only a little over 2". I bought a few feet of tubing from www.mandrel-bends.com . I went with 2.5" 16 gauge tubing. Next, I cut it to length and took the pieces down to a local exhaust place. They swedged the ends to match the collector. I had them also put a 12° bend in one of the pieces. Below are pics of the short and straight pipe, as well as the longer pipe with the bend:








You can see the pipe was not mandrel bent, and the inside collapsed somewhat.





I have also found a baffle that will work with this setup. Cycle Shack sells a 2.5" baffle for their exhausts, and they run around $23 + shipping.





My KZ900 project is stalled for the summer, but I hope to get back on it more in the fall. I will need to make a small bracket and weld it to the inside of the tailpipe. Also, as short as I made the straight pipe, there is hardly room for the baffle!





If someone wants to try this setup, please let me know how it works for you.
1977 Kawasaki KZ900A5
1975 Honda CB550K
1996 Ducati 900SS CR
Last edit: 07 Jul 2011 15:26 by EricHa.

Please Log in or Create an account to join the conversation.

  • testarossa
  • testarossa's Avatar
  • Offline
  • User
  • User
    Registered
  • Attack life, it's only trying to kill you.
  • Posts: 3673
  • Thanks: 83

Re: The Kerkimura Header

07 Jul 2011 15:36
#461550
A poor man's Yosh. I like it. Looks like you get to be the pioneer. We'll be the settlers for now. :P
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN

Please Log in or Create an account to join the conversation.

  • EricHa
  • EricHa's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 138
  • Thanks: 1

Re: The Kerkimura Header

07 Jul 2011 17:06
#461568
testarossa wrote: A poor man's Yosh. I like it. Looks like you get to be the pioneer. We'll be the settlers for now. :P

Yep, if MAC would change their Z header to something like this, one would think that they would sell a bunch.
1977 Kawasaki KZ900A5
1975 Honda CB550K
1996 Ducati 900SS CR

Please Log in or Create an account to join the conversation.

  • Mcdroid
  • Mcdroid's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Gone Kwackers
  • Posts: 6909
  • Thanks: 530

Re: The Kerkimura Header

07 Jul 2011 17:18
#461570
Nice post...thanks.
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: The Kerkimura Header

07 Jul 2011 17:35
#461571
Just totally awesome. That is just too cool.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • Russ Jackson
  • Russ Jackson's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 521
  • Thanks: 1

Re: The Kerkimura Header

07 Jul 2011 17:38
#461572
Well done looks great...Russ
1976 KZ 900 B1 29 smoothbores, Kerker, Lester Mags
2008 Kawasaki Concours 14 abs

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: The Kerkimura Header

07 Jul 2011 17:40 - 07 Jul 2011 17:40
#461576
I have a Kerker header pipe waiting for just that purpose. I sold the tailpipe and kept the header to do just that.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 07 Jul 2011 17:40 by otakar.

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: The Kerkimura Header

07 Jul 2011 18:45
#461588
Very cool Kerkimura.

In case anyone is interested, Dennis Kirk sells perforated baffle tubes very similar, if not identical, to that found in Kerker canisters. You can make a complete muffler pretty easily with that and some tubing. I made a couple.. just copied a Kerker one.

Please Log in or Create an account to join the conversation.

  • mtbspeedfreak
  • mtbspeedfreak's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1413
  • Thanks: 36

Re: The Kerkimura Header

07 Jul 2011 19:02
#461590
Awesome project! Thanks for taking the time to share. B)
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!

If it has tits or tires, it'll give you problems!

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: The Kerkimura Header

07 Jul 2011 19:27
#461595
that has always been the easy fix and even though i saw one get bent by a buddy at midas mufflers in the 80's...for use on market 4into1 uppers....i never did see anyone ever use one on a road bike...it makes sense....now the baffle gig of your design...that is not one i seen...you gonna high heat flat black the whole thing or get it satin heat ceramic dipped?
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • ELCouz
  • ELCouz's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 376
  • Thanks: 5

Re: The Kerkimura Header

08 Jul 2011 00:25
#461651
Very nice job! B)

Are you interested in selling them :lol: ?

Please upload a video on youtube once project is done!

By looking at it, for sure it will sound great!

regards,
laurent
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe

Please Log in or Create an account to join the conversation.

  • EricHa
  • EricHa's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 138
  • Thanks: 1

Re: The Kerkimura Header

08 Jul 2011 09:35
#461685
I think that someone could sell them as a swedged straight pipe with baffle, and the end user would have to weld up a bracket depending on their application. The Kerkimura will just be high temp black, as I have an early Yosh hiding in the garage that will someday get the ceramic beauty treatment.
1977 Kawasaki KZ900A5
1975 Honda CB550K
1996 Ducati 900SS CR

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum