How to detect a Lean condition (changing mufflers)

  • djturnz
  • djturnz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 340
  • Thanks: 5

How to detect a Lean condition (changing mufflers)

13 Jul 2011 11:31
#462631
I am going to be swapping my "stock" mufflers for a set of shorter open baffle type mufflers. (glass pack type actually) I am after the sound and look. I assume that this will lean out my mixture and I'll need to re-jet (which I've never had to do before). What engine characteristics will be present when it's running lean? I understand that pulling the plugs is the best way to read the engine, but I am wondering what characteristics I would notice while riding to tell me it's running lean or rich?
1982 KZ750 (4) LTD

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: How to detect a Lean condition (changing mufflers)

13 Jul 2011 11:34
#462632
You'll know you're running lean if you can see tail lights on Harleys. :laugh:
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: How to detect a Lean condition (changing mufflers)

13 Jul 2011 14:51
#462661
If you are cruising at small throttle opening and the bike feels like it's surging, that is likely going to be your first symptom. Also, it may take longer to come off choke, but that is less telltale.

My buddy put an aftermarket exhaust on his E, and I don't think he had to rejet. He may have later on, but at least not at first. He was able to ride it. But exhausts vary pretty widely, so you'll probably just have to try and see.

Please Log in or Create an account to join the conversation.

  • djturnz
  • djturnz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 340
  • Thanks: 5

Re: How to detect a Lean condition (changing mufflers)

13 Jul 2011 14:56
#462664
I'm going to put two of the smallest glass packs that Cherry Bomb makes on it. I have a few ideas to "descretely" choke it a bit to get some back pressure.
1982 KZ750 (4) LTD

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: How to detect a Lean condition (changing mufflers)

13 Jul 2011 15:10
#462665
Speaking of "choke", if it runs rough while cruising, and choking it makes it run better, then it's lean.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: How to detect a Lean condition (changing mufflers)

13 Jul 2011 15:21
#462667
If your after market exhaust system is made of single wall tubing(most are)instead of double wall tubing like the manufacturers provide with the bike, the part close to the exhaust port will turn color(more a straw or brass color) indicating a lean condition.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • djturnz
  • djturnz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 340
  • Thanks: 5

Re: How to detect a Lean condition (changing mufflers)

13 Jul 2011 15:43
#462669
My headers are stock. The mufflers are like the universal slipons that Whitney sells.
1982 KZ750 (4) LTD

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: How to detect a Lean condition (changing mufflers)

13 Jul 2011 15:49 - 13 Jul 2011 15:50
#462670
If too lean, you will get weak throttle response, slower acceleration and white spark plugs.
1979 KZ-750 Twin
Last edit: 13 Jul 2011 15:50 by bountyhunter.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: How to detect a Lean condition (changing mufflers)

20 Jul 2011 17:48
#463998
u may also experiance poping on decel when lean.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • keith1
  • keith1's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1646
  • Thanks: 3

Re: How to detect a Lean condition (changing mufflers)

26 Jul 2011 22:27
#465177
mark1122 wrote: u may also experiance poping on decel when lean.


what he said.....that would be your first indicator.....white plugs the second, and slight application of choke resulting in increased performance......BINGO....good luck....

Please Log in or Create an account to join the conversation.

  • ELCouz
  • ELCouz's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 376
  • Thanks: 5

Re: How to detect a Lean condition (changing mufflers)

28 Jul 2011 16:35
#465545
u may also experiance poping on decel when lean.

Be careful!

On many carbs decelerating while at high engine rpm will cause popping and backfire because mixture will always be too much lean (throttle plate is closed creating too much vacuum and pilot jet cannot give enough fuel to make it less lean)

It will be worse with an straight pipe or aftermarket exhaust without baffle!
OEM mufflers and street legal baffles are designed to reduce chance of loud popping and backfiring in the pipes!

Popping or backfire at low rpm is a sign of lean mixture though!


regards,
laurent
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe

Please Log in or Create an account to join the conversation.

  • ottothecow
  • ottothecow's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 27
  • Thanks: 0

Re: How to detect a Lean condition (changing mufflers)

29 Jul 2011 01:19 - 29 Jul 2011 01:29
#465637
keith1 wrote:
mark1122 wrote: u may also experiance poping on decel when lean.


what he said.....that would be your first indicator.....white plugs the second, and slight application of choke resulting in increased performance......BINGO....good luck....

Well, that settles it...my kz400 (as purchased monday) is definitely running lean. I have not checked the ends of the plugs, but everything else rings true.

What do I have to do now? AFAIK it is pretty much stock. I want to give everything a once over before riding it a ton (starting with an oil change hopefully this weekend) but the backfiring and lack of throttle response is at the top of the list (and choking the engine to keep it alive and get it running right seems like a terrible solution).
1979 KZ400
Last edit: 29 Jul 2011 01:29 by ottothecow.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum