Clutch dropping from 2nd to neutral
- Mandyrew
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Clutch dropping from 2nd to neutral
13 Jul 2011 18:33 - 13 Jul 2011 18:34
Hello. Had a long drama with a stripped oil drain and had to put the bike on it's side to do the drilling, it all worked out, finally. Take her on the first ride and for the first time the bike often slips from 2nd to neutral when the throttles on... Sometimes it goes to 2nd, and if I quick take it to 3rd I'm okay there.
Anybody have a quick diagnostic idea about why this would happen after the bike was put on it's side?
Thanks!
Anybody have a quick diagnostic idea about why this would happen after the bike was put on it's side?
Thanks!
KZ440 LTD '81
Last edit: 13 Jul 2011 18:34 by Mandyrew. Reason: Added detail
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Clutch dropping from 2nd to neutral
13 Jul 2011 18:41
Could it be a bent shift fork preventing 2nd gear from being fully engaged? Just guessing; I have had no similar experience. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: Clutch dropping from 2nd to neutral
13 Jul 2011 19:13
If the bike shifts into second and you can ride there with light throttle and when you gas it more then it slips or pops out its a worn second gear in your transmission.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- Kawasaki_Mike
-
- Offline
- User
-

Registered
- 1980 Kawasaki 750 LTD
- Posts: 48
- Thanks: 0
Re: Clutch dropping from 2nd to neutral
15 Jul 2011 21:25
I had kind of the same problem with my bike. Turned out I wasn't completely kicking it into 2nd and it would slip back into neutral. Could be the same issue.
Please Log in or Create an account to join the conversation.
- TexasKZ
-
- Offline
- Platinum Member
-

Registered
- Posts: 8423
- Thanks: 2806
Re: Clutch dropping from 2nd to neutral
15 Jul 2011 21:30
When this starts on a bike that did not suffer so before, it is generally a bent shift fork or rounded off engagement dogs on the gear. However, is it possible that any shavings got into the tranny from the drilling episode? Really, it isn't difficult to remove the pan to prevent that and the gasket is pretty cheap.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
Please Log in or Create an account to join the conversation.
- Mandyrew
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Re: Clutch dropping from 2nd to neutral
16 Jul 2011 12:32 - 16 Jul 2011 14:46
I really like the shards in the transmission theory ... something that connects the slippage to the previous procedure makes the most sense ... i've had no time this week to work on it but i'll be getting in there soon.
don't quite understand though how a shard could get through the filter, though ...
...and also, these 81 Kz's don't have an oil pan, it's all in the block ...
don't quite understand though how a shard could get through the filter, though ...
...and also, these 81 Kz's don't have an oil pan, it's all in the block ...
KZ440 LTD '81
Last edit: 16 Jul 2011 14:46 by Mandyrew. Reason: added detail
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
