Question regarding all KZ 4 cylinders...

  • ELCouz
  • ELCouz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 376
  • Thanks: 5

Question regarding all KZ 4 cylinders...

16 Jul 2011 18:47 - 16 Jul 2011 18:53
#463199
Hi,

Just curious, what are the advantage of have a separate carburetor per cylinder?

Would have been simpler by having 1 big carburetor for all 4 cylinders ?

No carb sync to do, single mixture adjustment ... hurray! :)

Some old cars had single carburetors and had multiple cyls.

Even my old golf 96 (1.8L) have a single injector and throttle body for 4 cylinders (Monomotronic)



Best regards,
laurent
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe
Last edit: 16 Jul 2011 18:53 by ELCouz.

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Question regarding all KZ 4 cylinders...

16 Jul 2011 18:57
#463202
Think about it. Before F.I. most multiple cylinder cars had 1 carb--BUT- they were water cooled.On an air cooled engine,fuel does 2 things--provides the charge that powers the engine and acts as a sort of coolant. So to answer ur question--better fuel distribution plus a little bit of cooling effect.bj

Please Log in or Create an account to join the conversation.

  • martin_csr
  • martin_csr's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7993
  • Thanks: 1648

Re: .

16 Jul 2011 19:12 - 22 Jan 2013 03:37
#463205
.
Last edit: 22 Jan 2013 03:37 by martin_csr.

Please Log in or Create an account to join the conversation.

  • ELCouz
  • ELCouz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 376
  • Thanks: 5

Re: Question regarding all KZ 4 cylinders...

16 Jul 2011 19:23
#463207
Think about it. Before F.I. most multiple cylinder cars had 1 carb--BUT- they were water cooled.On an air cooled engine,fuel does 2 things--provides the charge that powers the engine and acts as a sort of coolant. So to answer ur question--better fuel distribution plus a little bit of cooling effect.bj

I would like to show you a particular well know air cooled car engine ;)

en.wikipedia.org/wiki/Volkswagen_air_cooled_engine

Available single or dual carburetor configuration :)

They might not be powerful but damn these things were indestructible!

I think some hum hum cough (old) Harleys have single carbs configuration for twins.
I'd guess that having 4 carburetors provides a more precise metering of the fuel.

Yep sure but since it made tuning possibilities and problems multiplied by 4... really make a difference after all?

thanks for the participations :)

regards,
laurent
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: Question regarding all KZ 4 cylinders...

16 Jul 2011 20:18
#463215
My opinion - Back in the day, some old British twins (i.e. BSA 500) could be bought with 1 carb or 2 carbs depending on the model. The models with 2 carbs were always more powerful than the single carb versions even though they shared the same basic engine and had the same displacement. The single carb versions sold fairly well and leaned more toward transportation than sport. Fast forward to the Japanese multi cylinder bikes. Then, as today, the emphasis was on power (i.e. the KZ650 broke all the 750 cc speed records). Kawasaki was not alone in seeking the speed crown. To my knowledge, all Japanese bikes had 1 carb per cylinder, and I suspect it was to wring every last drop of power out of the engines. Also, fitting a carb and manifold big enough to feed a 4 cylinder motor between the engine and airbox area might have been difficult. I doubt that the manufacturers were concerned much about owners being able to tune the bikes as long as the bikes could be tuned and run well when new. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • DoubleDub
  • DoubleDub's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Question regarding all KZ 4 cylinders...

16 Jul 2011 20:46
#463216
I'm going to go with throttle response on a such a small displacement engine.

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Question regarding all KZ 4 cylinders...

16 Jul 2011 20:48
#463217
The other issue is fuel starvation. The air cooled VWs had the carb(s) on top,theoretically equalizing the fuel to each cylinder. On an East-#West 4 cylinder cycle with NO room at the top of the engine for 1 big carb, 4 carbs were kind of a necessity.bj

Please Log in or Create an account to join the conversation.

  • hocbj23
  • hocbj23's Avatar
  • User
  • User
    Public
  • Thanks: 0

Re: Question regarding all KZ 4 cylinders...

16 Jul 2011 20:50
#463218
Bump. By the way, the BEST 2 cylinder engine of all times, the Vincent ,had 2 carbs.bj

Please Log in or Create an account to join the conversation.

  • ELCouz
  • ELCouz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 376
  • Thanks: 5

Re: Question regarding all KZ 4 cylinders...

16 Jul 2011 23:47
#463251
The other issue is fuel starvation. The air cooled VWs had the carb(s) on top,theoretically equalizing the fuel to each cylinder. On an East-#West 4 cylinder cycle with NO room at the top of the engine for 1 big carb, 4 carbs were kind of a necessity.bj

Flat-4 boxer engine... that would be cool for KZ series :)
I'm going to go with throttle response on a such a small displacement engine.

Having a 1 into 4 tubing would induce latency in a 1 carb setting?
Bump. By the way, the BEST 2 cylinder engine of all times, the Vincent ,had 2 carbs.bj

Nice bikes they made ... even one guy did 721 000 miles on it! (gone through multiple engine rebuilt though!)

mcitours.wordpress.com/2011/02/10/tourin...-vincent-motorcycle/

Thanks for making me discovering this vintage bike manufacturer :)

Very interesting answers we are getting here :)

regards,
laurent
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe

Please Log in or Create an account to join the conversation.

  • testarossa
  • testarossa's Avatar
  • Offline
  • User
  • User
    Registered
  • Attack life, it's only trying to kill you.
  • Posts: 3673
  • Thanks: 83

Re: Question regarding all KZ 4 cylinders...

17 Jul 2011 01:53
#463278
OK Laurent, here goes my theory. It's two-fold. First commonly available transverse mounted, inline four cylinder, chain drive bike was the Honda CB750. Imitation is the sincerest form of flattery as they say, so Honda built a I-4 with 4 carbs and the other manufacturers copied their lead. Notice the similarities between a Honda I-4 (the first to market) a Kawasaki I-4 (the second) and a Suzuki I-4 (the third) It is widely known that Honda and Kawasaki were both building competing 750cc 4 cylinder machines in the late 1960s. I would guess that a fair amount of industrial intelligence was going on between the two, resulting in very similar bikes. Also, known that Suzuki basically reversed engineered a Z1 motor to develop the GS series.

The second aspect to my theory goes as follows. Inline four bike engines are relatively small displacement, high rpm motors. As such, they are tuned for optimum performance at the top of their usable rpm range. So what sort of intake tract yields the best high rpm performance? The short, large diameter, straight intake path. The engineers at Honda and Kawasaki had to develop an engine that was capable of outperforming their main competition in the US, Harley Davidson. At the time Harley was building a 1200cc V-twin that was noted for producing a lot of torque. The Japanese OEM's had to stack the deck in their favor by producing a smaller engine that generated similar or superior performance. They needed to build high rpm horsepower.

Finally, automotive style, common plenum intake manifolds are fairly complicated castings compared to the very simple carburetor boots on your motorcycle. Manufacturing costs come into play here. Also, a Mikuni style motorcycle carb is fairly simple compared to a quadra-jet. Four carbs are lighter, simpler, cheaper and easier to manufacture, and easier to assemble on the line than a one carburetor, common manifold setup. The manufacturer doesn't really care if you have a pain in the ass 30 years later trying to tune a bike for unleaded, 10% alcohol fuel that it wasn't even originally meant to run. They want to build the bike that generates the most profit for the least expense.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN

Please Log in or Create an account to join the conversation.

  • ELCouz
  • ELCouz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 376
  • Thanks: 5

Re: Question regarding all KZ 4 cylinders...

17 Jul 2011 02:07 - 17 Jul 2011 02:09
#463281
OK Laurent, here goes my theory. It's two-fold. First commonly available transverse mounted, inline four cylinder, chain drive bike was the Honda CB750. Imitation is the sincerest form of flattery as they say, so Honda built a I-4 with 4 carbs and the other manufacturers copied their lead. Notice the similarities between a Honda I-4 (the first to market) a Kawasaki I-4 (the second) and a Suzuki I-4 (the third) It is widely known that Honda and Kawasaki were both building competing 750cc 4 cylinder machines in the late 1960s. I would guess that a fair amount of industrial intelligence was going on between the two, resulting in very similar bikes. Also, known that Suzuki basically reversed engineered a Z1 motor to develop the GS series.

I knew competition was tight between Honda , Kawa and Suzuki but not to the point to copy each other design :blink: ...

Harley (their rival back there) is now totally unrelated in the sport bike domain (Buell is dead anyway! :( ).
I think they imposed a tax back there on Japanese imports... IIRC this tax saved Harley from bankruptcy:ohmy:.

I wonder what did stop the speed war between Japanese manufacturers... gentlemen's agreement maybe?
Finally, automotive style, common plenum intake manifolds are fairly complicated castings compared to the very simple carburetor boots on your motorcycle. Manufacturing costs come into play here. Also, a Mikuni style motorcycle carb is fairly simple compared to a quadra-jet. Four carbs are lighter, simpler, cheaper and easier to manufacture, and easier to assemble on the line than a one carburetor, common manifold setup. The manufacturer doesn't really care if you have a pain in the ass 30 years later trying to tune a bike for unleaded, 10% alcohol fuel that it wasn't even originally meant to run. They want to build the bike that generates the most profit for the least expense.

Price/Performance, i think you find the right explanation...

Thanks for your nice theory testarossa!

regards,
laurent
1982 KZ810-R1 GPZ with hindle 4-into-1 pipe
Last edit: 17 Jul 2011 02:09 by ELCouz.

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: Question regarding all KZ 4 cylinders...

17 Jul 2011 02:38
#463288
want to get the best answer i bet ,or up there..send an e-mail to Kevin Cameron @ Cycle World magazine...imo...i bet the answer has to do with two strokes and or airplanes in one form or another.....

great question........
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum