clutch
- dynastydudge
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
clutch
18 Jul 2011 23:21
put the engine back in the 1980 kz750 h1. its coming together nicely. i got the chain on, the footshifter, put the bars on and hooked up the clutch. pulled in the clutch and pushed down on the shifter and its still in neutral. wont go into second either.....do i need to adjust the clutch?
were not here for a long time, just a good time......1980 kz750 ltd h1
1982 honda cm 450e
1982 honda cm 450e
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: clutch
18 Jul 2011 23:32 - 18 Jul 2011 23:33dynastydudge wrote: put the engine back in the 1980 kz750 h1. its coming together nicely. i got the chain on, the footshifter, put the bars on and hooked up the clutch. pulled in the clutch and pushed down on the shifter and its still in neutral. wont go into second either.....do i need to adjust the clutch?
Could try rolling the bike slightly forward and backward while trying to push into low gear.
Transmission is designed to not go into 2nd gear unless the bike is rolling forward at more than slow walking speed.
Otherwise supposed to shift through all the gears while riding, both up and down, even without using the clutch.
Would also perform the clutch push rod adjustment.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 18 Jul 2011 23:33 by Patton.
Please Log in or Create an account to join the conversation.
- dynastydudge
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: clutch
19 Jul 2011 00:03
i tryed rolling it forward and backwards. what do you mean u say perform clutch push rod? i know what it is, but dont knows its function, and what you mean when you say perform clutch push rod.
were not here for a long time, just a good time......1980 kz750 ltd h1
1982 honda cm 450e
1982 honda cm 450e
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: clutch
19 Jul 2011 00:14 - 19 Jul 2011 01:42dynastydudge wrote: i tryed rolling it forward and backwards. what do you mean u say perform clutch push rod? i know what it is, but dont knows its function, and what you mean when you say perform clutch push rod.
Clutch push rod adjustment -- Need and Purpose
[This is a 1 minute job from start to finish, maybe 2 minutes the first time.]
The FSM covering Z1 and KZ900 includes a periodic maintenance chart requiring clutch push rod adjustment at 2000 mile (3000 km) intervals and explains the need therefor in separate text, which explanation is quoted verbatim as follows:
Besides cable stretch, clutch plate wear also causes the clutch to go out of adjustment, with a decrease in push rod play. Due to this wear, the push rod gradually moves closer to the clutch release lever (at the lower end of the clutch cable) until it touches the adjusting screw. When the rod is touching the screw and therefore has no play, the clutch will not engage fully and clutch slippage will occur. Note that the clutch push rod does not necessaily have play just because the clutch hand lever has play, and so hand lever play alone cannot be used to determine whether or not the clutch requires adjustment.
The FSM covering '77-'79 KZ1000's includes a periodic maintenance chart requiring clutch adjustment at 5000 km intervals, and explains the need therefor in slightly different language, which explanation is quoted verbatim as follows:
Clutch plate wear also causes the clutch to go out of adjustment. This wear causes the play between the push rod and the adjusting screw to gradually diminish until the push rod touches the adjusting screw. When this play is lost, the clutch will not engage fully, causing the clutch to slip.
NOTE: Even though the proper amount of play exists at the clutch lever, clutch lever play alone cannot be used to determine whether or not the clutch requires adjustment.
This drawing hopefully helps to illustrate the mechanics involved.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 19 Jul 2011 01:42 by Patton.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: clutch
19 Jul 2011 00:23
Clutch push rod adjustment
kzrider.com/index.php?option=com_kunena&...limitstart=20#429567
Assure having some "slop" in the clutch cable.
Removing the access plate should reveal the adjustment screw and lock nut.
First, slightly loosen the lock nut.
The hidden end of the screw interfaces with the push rod.
The basic idea is to lightly seat the screw against the push rod, then back the screw 1/4 turn away from the push rod, to thereby provide a small gap between end of screw and push rod.
Here's a possible snag ---
The screw is part of an actuator assembly.
On some designs (screw-type), the screw turns clockwise to seat before turning counter-clockwise to provide the gap.
On other designs (ball and ramp), the screw turns counter-clockwise to seat before turning clockwise to provide the gap.
Will now speculate that the bike at hand has the ball and ramp style, whereby the screw turns counter-clockwise to seat before turning clockwise to provide the gap. But I might be wrong. So if it doesn't work that way, adjust it the other way.
Remember to snug the lock nut before finishing. Just snug is plenty tight enough.
Lastly, reduce "slop" in the cable to produce desired amount of free play in the lever at the perch.
Good Fortune!
kzrider.com/index.php?option=com_kunena&...limitstart=20#429567
Assure having some "slop" in the clutch cable.
Removing the access plate should reveal the adjustment screw and lock nut.
First, slightly loosen the lock nut.
The hidden end of the screw interfaces with the push rod.
The basic idea is to lightly seat the screw against the push rod, then back the screw 1/4 turn away from the push rod, to thereby provide a small gap between end of screw and push rod.
Here's a possible snag ---
The screw is part of an actuator assembly.
On some designs (screw-type), the screw turns clockwise to seat before turning counter-clockwise to provide the gap.
On other designs (ball and ramp), the screw turns counter-clockwise to seat before turning clockwise to provide the gap.
Will now speculate that the bike at hand has the ball and ramp style, whereby the screw turns counter-clockwise to seat before turning clockwise to provide the gap. But I might be wrong. So if it doesn't work that way, adjust it the other way.
Remember to snug the lock nut before finishing. Just snug is plenty tight enough.
Lastly, reduce "slop" in the cable to produce desired amount of free play in the lever at the perch.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- dynastydudge
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: clutch
19 Jul 2011 00:25
thans alot bro, i think this is exactly what the problem is. i will check it out tommorrow. hard to get this bike done when my garage is not air conditioned and its 100 degrees out.
were not here for a long time, just a good time......1980 kz750 ltd h1
1982 honda cm 450e
1982 honda cm 450e
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Please Log in or Create an account to join the conversation.
- RonKZ650
-
- Offline
- User
-

Registered
- Posts: 3719
- Thanks: 252
Re: clutch
19 Jul 2011 00:39
Clutch adjustment doesn't matter $0.02 on shifting into first gear if it still acts like it's in neutral. I suggest looking further before fooling with adjustment. More KZs are ruined by adjusting the clutch needlessly because more often that not this is not the issue and you've just added to the problem, by trying to adjust out an assembly problem, ect.
321,000 miles on KZ's that I can remember. Not going to see any more.
Please Log in or Create an account to join the conversation.
- dynastydudge
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: clutch
19 Jul 2011 00:54
ron i didnt have the engine apart. i just had it out of the frame. i did have the valves adjusted, but thats it.
were not here for a long time, just a good time......1980 kz750 ltd h1
1982 honda cm 450e
1982 honda cm 450e
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: clutch
19 Jul 2011 01:27 - 19 Jul 2011 01:46RonKZ650 wrote: Clutch adjustment doesn't matter $0.02 on shifting into first gear if it still acts like it's in neutral. I suggest looking further before fooling with adjustment. More KZs are ruined by adjusting the clutch needlessly because more often that not this is not the issue and you've just added to the problem, by trying to adjust out an assembly problem, ect.
The transmission should indeed shift into low gear regardless of whether the clutch push rod is properly adjusted.
However, adjusting the push rod as a matter of routine maintenance per instructions specified in the Owner's Manual and in the Factory Service Manual is imo the better practice. And likely enables longer clutch plate life until the service limits are exhausted by avoiding premature replacement of the clutch plates.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 19 Jul 2011 01:46 by Patton.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: clutch
19 Jul 2011 02:01 - 19 Jul 2011 02:01And makes this a puzzling situation, especially because the transmission should shift into low gear with or without using the clutch, and regardless of whether the clutch is engaged or disengaged, and basically regardless of the condition of the clutch, or any adjustment to the clutch or clutch cable.dynastydudge wrote: ...didnt have the engine apart. i just had it out of the frame....
Is the shift lever undamaged and properly attached to the shift shaft?
Not slipping on the shaft, and not hitting on anything?
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 19 Jul 2011 02:01 by Patton.
Please Log in or Create an account to join the conversation.
- dynastydudge
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: clutch
19 Jul 2011 10:07
ok it was puzzling me too, and i dont know what happened. but, i just went out in the garage and it went into first gear. so, that mystery is solved, but, i pulled in the clutch and first gear was still ingaged. so the clutch will need adjusted. thanks for the replies
were not here for a long time, just a good time......1980 kz750 ltd h1
1982 honda cm 450e
1982 honda cm 450e
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
