KZ650 Stator

  • 80KAW650
  • 80KAW650's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

KZ650 Stator

19 Jul 2011 12:14
#463722

Is it possible to retro-fit a 1981 kz650 stator



into a 1980?

Please Log in or Create an account to join the conversation.

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 5069
  • Thanks: 29

Re: KZ650 Stator

19 Jul 2011 12:40
#463726
Only if you retrofit the entire charging system. One is single phase and one is three phase.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

  • OnkelB
  • OnkelB's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1011
  • Thanks: 80

Re: KZ650 Stator

19 Jul 2011 13:16 - 19 Jul 2011 13:19
#463737
Otto is correct, you'll need a 3-phase reg/rec as well, other than that it's pretty much plug and play. No need to change the rotor/flywheel, the 3-phase stator will work fine with the rotor you have.

I have done this conversion myself on a 79 D1 engine, anything you want to know, just ask.
77 KZ 650 B1, 82 GPz 1100 B2.
Last edit: 19 Jul 2011 13:19 by OnkelB.

Please Log in or Create an account to join the conversation.

  • 80KAW650
  • 80KAW650's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: KZ650 Stator

19 Jul 2011 13:49
#463745
copy that, so replace the regulator and I'm golden. Does anyone know if by chance these stators produce more amps or about the same?

Please Log in or Create an account to join the conversation.

  • OnkelB
  • OnkelB's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1011
  • Thanks: 80

Re: KZ650 Stator

19 Jul 2011 15:20
#463765
Don't know the specifics of the stator in your pic, but the one I got is an Electrex G1 - the G1 is a hi-output (overwound) stator and will put out quite a bit more than your current stator.
77 KZ 650 B1, 82 GPz 1100 B2.

Please Log in or Create an account to join the conversation.

  • 80KAW650
  • 80KAW650's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: KZ650 Stator

20 Jul 2011 08:12
#463897
cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll...me=STRK%3AMEWAX%3AIT

Would this regulator do the trick you think?

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: KZ650 Stator

20 Jul 2011 08:49 - 20 Jul 2011 08:54
#463901
80KAW650 wrote: cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll...me=STRK%3AMEWAX%3AIT
Would this regulator do the trick you think?
The ebay unit looks okay, and seller with 100% feedback seems reliable.

If needed, FILEBASE includes the 1981 KZ650 wiring diagram.

:unsure: Am curious about reason for needing to replace the stator.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 20 Jul 2011 08:54 by Patton.

Please Log in or Create an account to join the conversation.

  • 80KAW650
  • 80KAW650's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: KZ650 Stator

20 Jul 2011 12:09 - 20 Jul 2011 12:11
#463949
I'm upgrading my battery to a 14ah 210cca lithium ion. Therfore I need a stator that can crank more out to keep up. My original was getting pretty weak and wasn't even keeping up with my 10ah 90cca. Honestly it all started when I installed some after market fog lights to make up for my factory headlight, which was dim at best even on high beam. They work good while RPMs are up but stopping at a red light would drain the battery pretty quick. I tried not using the fog lights for a while but there was very litle improvement, couldn't even turn over the engine with the electric start.
Last edit: 20 Jul 2011 12:11 by 80KAW650.

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: KZ650 Stator

22 Jul 2011 15:08 - 22 Jul 2011 17:17
#464267
Instead of throwing parts at it, it might be better to find out where the problem lies.
Stock charging system will easily power all the stock electrical items and recharge the battery, so maybe there is a connection problem somewhere? Or maybe your original battery is bad? I believe stock output is 280 watts, or 20 amps at 14 volts.

Bigger battery does not require bigger charging system, everything else being equal, you still use the same amount of watts to start it, which the charging system has to replace.

By the way, where did you get a 14ah 210cca lithium ion battery? Or do you perhaps mean Lithium Iron battery? What kind? Shoreline or something like that?


Well, I was kind of close :laugh:

www.shoraipower.com/



Standard Recommendation: LFX14L2-BS12
MSRP: $153.95
Really big, OUCH!! Saves 6.6 pounds vs my stock ZX11 battery though.
KD9JUR
Last edit: 22 Jul 2011 17:17 by steell.

Please Log in or Create an account to join the conversation.

  • 80KAW650
  • 80KAW650's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: KZ650 Stator

23 Jul 2011 04:27
#464390
My bad, you are correct lithium iron, and that is the brand. Unfortunatly too late not to throw the part at it, all have been purchased. Once installed if he problem is not solved I'll check to see if it's connectivity. This was my 2nd battery and 2nd (used) stator in two years.

Please Log in or Create an account to join the conversation.

  • 80KAW650
  • 80KAW650's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 17
  • Thanks: 0

Re: KZ650 Stator

15 Aug 2011 21:20
#469259
Okay you said to ask you any questions, I apparently ordered the wrong regulator/rectifier. It's a 3 phase but it's missing a wire. My 80' has 2 yellow (stator), 1 black (ground), one white and red stiped (power), and 1 brown (?). The new rectifier has 3 yellow(stator), 1 red (power), 1 black (ground). I have no wire to connect to the brown. I'm not even sure what the brown does ultimately but I know I can't just not hook it back up. I can't seem to find a 3 phase with that 1 brown wire. Can you advise?

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: KZ650 Stator

15 Aug 2011 21:38
#469264
You won't need to hook up the Brown Wire. It was the Sensing wire so the Regulator would know what the voltage level was. The New Regulator with 5 instead of six, does this through the Red/ White wire, which goes to the battery.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum