1980 z1 classic question.
- mrturbo
-
Topic Author
- Offline
- User
-

Registered
- Posts: 15
- Thanks: 0
1980 z1 classic question.
21 Jul 2011 22:13Over the years i noticed the ones i saw had carbs on them.Wondering if they had a chronic problem ???
My 750 turbo seemed great with fi.If i wanted to put a straight header on this bike is there a mod for the injection???I live at sea level here in n.myrtle beach s.c.
Thanks for any info on this 1980.My first z1 classic.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: 1980 z1 classic question.
21 Jul 2011 23:25
My understanding is, when they first came out, this was the first generation fuel injection Kawasaki tried using basically the system from cars. If it didn't work, there was a factory "Fix" to take the FI off and use carbs.
If you do some searching, there are at least two people here that are still using the FI system on their classics.
If you do some searching, there are at least two people here that are still using the FI system on their classics.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- DFIGPZ
-
- Offline
- User
-

Registered
- Posts: 615
- Thanks: 121
Re: 1980 z1 classic question.
22 Jul 2011 20:32
Well the DFI on the turbo was a much better setup than the Z1 classic. To put it bluntly they were a piece of shit that being said I would not modify the exhaust on it I would keep it orig as these are getting tougher to find their are tweeks you can do but short of making sure all the orig fuel inj parts are clean and connections are tight etc. the z1 classic has the inj in the cylinder head and the problem is hot heat soaking not to mention the air gate etc but they can be made to run ok it just takes some fiddling. That is one of my favorite paint schemes that Kawasaki had and to find one with the orig fuel inj intact is a great find as alot have been converted to carbs.
1984 750 Turbo
Please Log in or Create an account to join the conversation.
- Lorcan
-
- Offline
- User
-

Registered
- Speed Loony
- Posts: 580
- Thanks: 60
Re: 1980 z1 classic question.
23 Jul 2011 10:50
The normal band aid for an aftermarket exhaust is to bump the fuel pressure up by a few psi using an adjustable fuel pressure regulator (easily found on ebay). If the bike is fitted with a Throttle Position Sensor (TPS) you might also give that a tweak. Not sure if it has one though, as I believe it uses a mass airflow sensor.
760cc - 8.69@162mph
810cc, 211mph www.750turbo.com
www.stormdragbike.com
810cc, 211mph www.750turbo.com
www.stormdragbike.com
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
