MKII engine?

  • riverroad
  • riverroad's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 1980 1000LTD B4
  • Posts: 842
  • Thanks: 7

MKII engine?

25 Jul 2011 11:51 - 25 Jul 2011 11:54
#464779

Attachment camsandshark007.jpg not found


A while back I read on here that I'd be able to tell if my 1980LTD engine was a MKII or not by counting the teeth on a cam sprocket or something like that. Well since the bike is down right now I figured I'd go ahead and replace that pesky leaking cam plug and gasket.
So can any of you experts shed some light on the subject? Still had the original metal gasket, so this is the first daylight these cams have seen since '79 or so.

BTW, what kind of sealant do you guys like to use on the cam plugs?
Last edit: 25 Jul 2011 11:54 by riverroad.

Please Log in or Create an account to join the conversation.

  • etbike3135
  • etbike3135's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 379
  • Thanks: 50

Re: MKII engine?

25 Jul 2011 11:58 - 25 Jul 2011 12:00
#464781
32 teeth = MKII or 16 tooth center pin crank
30 teeth = standard 15 tooth crank

I can tell just by looking at your cam sprockets that you have 32 teeth.
1973 Kawasaki Z1
18 years in dragbikes
Last edit: 25 Jul 2011 12:00 by etbike3135.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: MKII engine?

25 Jul 2011 12:09
#464785
While you have it open, since it's been sealed up so long, you may want to check your valve clearances and check/replace the 4 idler rubber dampers. Those things can get hard as a rock and no longer provide any "give." If you do replace them use a little BLUE locktight or some other NON-permanent thread lock on them and do not overtighten (inch-pound torque wrench required). Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • riverroad
  • riverroad's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 1980 1000LTD B4
  • Posts: 842
  • Thanks: 7

Re: MKII engine?

25 Jul 2011 12:35
#464788
So, it IS a MKII. That makes me happy!:)

I'll do the fingernail jab on the rubbers to see if they're still pliable or not, and I'll check the clearances too. I don't have my Clymers with me. Know what they should be cold?

Please Log in or Create an account to join the conversation.

  • roy-b-boy-b
  • roy-b-boy-b's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 3245
  • Thanks: 103

Re: MKII engine?

25 Jul 2011 12:41
#464789
A "79" LTD is a animial of it's own. The crankshaft taper is diffrent from other 1000 cranks.

There has been several discussions on MarkII engines. Roy



kzrider.com/forum/2-engine/462331-1979-mkii-value
1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • trianglelaguna's Avatar
  • Offline
  • User
  • User
    Registered
  • New and improved - extra strength
  • Posts: 8019
  • Thanks: 236

Re: MKII engine?

25 Jul 2011 13:31
#464795
either way i wish i had it..nice motor
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • riverroad
  • riverroad's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 1980 1000LTD B4
  • Posts: 842
  • Thanks: 7

Re: MKII engine?

25 Jul 2011 14:19
#464800
I know these MKII's are what the drag racers like to start with when they build a motor, but are they really that hard to find anymore?

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum