Loud POP at ignition.

  • uncledirt
  • uncledirt's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 54
  • Thanks: 0

Loud POP at ignition.

29 Jul 2011 14:52
#465713
The last few times I've gotten to the bike it won't start. Got all the right lights, etc, normal. Figured I wasn't getting gas, so I pull the tank, get a vacuum, play around and get gas into the carbs. Won't start. Twice now, when I put it up on the center stand and about to get the voltmeter, I see that my ignition switch is a little off to the right, and it's very easy to bump it to turn off the bike. So I turn it a little more to the right to see how far I can turn it and POP!!!!! comming from the pipe. Last time I figured no big deal, once in a year type thing. It just did it again at the gas station. Put it up on the stand, checked the 20 amp fuse. Put a new one in just in case. Remembered to turn it farther to the right, POP!!! Rode it home. I sounds exactly like a very short but quick backfire. But there's no combustion/compression at the time this happens? I spent 20 minutes trying to get it to start this last time. Is the ignition connection not connected well enough. Never dealt with that issue. Seems like I get plenty off spark when I turn it there. But to get a POP that loud w/o blowing a fuse? Don't know. Too afraid to ride far from home. And I lost 2 cyclinders on the way back. Has to be a ground I think? Can't get over the POP though...it POPPED so hard it knocked my shades off the seat.
77 KZ650 'C'

Bachelors know more about women than married men; if they didn't they'd be married too.

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: Loud POP at ignition.

29 Jul 2011 15:07
#465716
Do you have a Dyna S ignition?

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: Loud POP at ignition.

29 Jul 2011 16:05
#465724
To elaborate on Lou's post, that loud pop is the spark plug igniting the mixture in a cylinder with an open valve, The reason the spark plug is sparking is because you turned the switch far enough to cause it to cut the power to the coil(s), and either the points are closed, or you have a Dyna S.
If you had the factory Kawasaki electronic ignition, I don't believe that would happen (according to my electron pusher friend Lou anyway) :P
KD9JUR

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Loud POP at ignition.

29 Jul 2011 17:04
#465731
Yup that sounds like the culprit...

If you're losing a couple cylinders, might be wise to take her off the road for a few hours and go about the electrical contacts - cleaning and crimping them so they fit together nice and snug.

Pull teh control pods apart and clean em' up too, makes a big difference.

Good luck!

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

  • uncledirt
  • uncledirt's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 54
  • Thanks: 0

Re: Loud POP at ignition.

29 Jul 2011 20:04
#465748
Dyna S, correct. The pods? You mean the 1-4 2-3 magnets on the metal face? I'm thinking I need to do just what you guys are saying, thorough electronic sweep and cleaning. How do you propose the cleaning be done exactly? Alcohol, degreaser type deal?
77 KZ650 'C'

Bachelors know more about women than married men; if they didn't they'd be married too.

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • TexasKZ's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
    Registered
  • Posts: 8420
  • Thanks: 2804

Re: Loud POP at ignition.

29 Jul 2011 21:54 - 29 Jul 2011 21:55
#465763
"Pods" refers to individual air filters, one per carb.


Our resident electron guru prefers De-oxit to clean electrical connectors. It is available and Radio Shack and elsewhere.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/forum/11-projects/620336...amateur-build-thread
Last edit: 29 Jul 2011 21:55 by TexasKZ.

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • TeK9iNe's Avatar
  • Offline
  • User
  • User
    Registered
  • What did you do!?!
  • Posts: 2436
  • Thanks: 28

Re: Loud POP at ignition.

30 Jul 2011 15:01
#465853
I meant control pods, as in the handlebar control pods. With your kill/start switch, headlights, etc.

Open them up and spray all the contacts with electrical cleaner.

Good luck.

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum