clutch pushrod fell out

  • jeff13m
  • jeff13m's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

clutch pushrod fell out

30 Jul 2011 19:13
#465895
just got started on rebuilding a 78 kz650 sr and first thing that happens is the clutch pushrod fellout.

so not sure what happened but the pushrod slid right out. is there a e-clip that holds this thing in or do i just push it back in and be done with it?

thanks!

Please Log in or Create an account to join the conversation.

  • kawman66
  • kawman66's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 199
  • Thanks: 5

Re: clutch pushrod fell out

30 Jul 2011 20:22
#465906
just push it back in its made to slide all the way though the cases.
75 z1b
76 kz900ltd
76 kz900
76 kz900-1500
77 kz1000ltd


my drinking team has a racing problem
The following user(s) said Thank You: jeff13m

Please Log in or Create an account to join the conversation.

  • Vter Bob
  • Vter Bob's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 493
  • Thanks: 4

Re: clutch pushrod fell out

30 Jul 2011 21:17
#465913
Did a steel ball about the diameter of the rod fall out with it? If so, that goes back in before the rod.
Georgia, Vermont

1981 KZ550 LTD
1982 KZ1000 LTD
1999 ZG1000 Concours

Greetings from the Peoples Republic of Vermont, home of Ethan Allen, 2 American Presidents, a socialist US Senator and.....Homer & Bart Simpson
The following user(s) said Thank You: jeff13m

Please Log in or Create an account to join the conversation.

  • jeff13m
  • jeff13m's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

Re: clutch pushrod fell out

02 Aug 2011 01:54
#466306
thanks for the info guys

Just seemed weird it pushes in with no clips to hold it.

No steel ball bearing fell out. just the rod but it may have rolled out since then since this thing came in boxes . . .

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: clutch pushrod fell out

02 Aug 2011 08:17
#466322
jeff13m wrote: ...this thing came in boxes....

Definitely gonna need a Factory Service Manual (FSM).

Meanwhile, here's a down-loadable on-line version.

Click > jarlef.no/Kawasaki/Series/Z/650/z650files.htm



Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • gwolever
  • gwolever's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 237
  • Thanks: 8

Re: clutch pushrod fell out

02 Aug 2011 22:33
#466474
I was doing some light reading with my bike's manual and it says to pull the pushrod out when removing the engine. Thought that was odd when it can be left in there to remove the engine. I didn't take out my pushrod when I pulled my engine.
1982 KZ1000 CSR

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum