1100 spectre timing question

  • garyprather
  • garyprather's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 133
  • Thanks: 0

1100 spectre timing question

06 Aug 2011 13:27
#467230
The other days I decided to check my timing with the timing light and noticed that the lobe is just above the mark while at idle. I was wondering if it is set advanced or is that the way it was intended to be set?

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: 1100 spectre timing question

06 Aug 2011 13:37
#467234
garyprather wrote: The other days I decided to check my timing with the timing light and noticed that the lobe is just above the mark while at idle. I was wondering if it is set advanced or is that the way it was intended to be set?

At idle rpm, the F mark is supposed to align with the permanent case mark (see image below).

On models without means to adjust ignition timing, the inspection window is especially useful to assure correct functioning of the advancer by watching it quickly move back and forth as rpm is varied by blipping the throttle.

Good Fortune! :)

1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: 1100 spectre timing question

06 Aug 2011 14:06
#467235
At idle, the ignition rotor will just be past the pickup pole when the strobe flashes. As the RPMs go up, it will gradually show being farther past the pickup when the strobe flashes. THis is normal.

However, as Patton points out, the timing is actually set using the F mark and on most bikes there are timing mark lines for when it's at full advance.

Please Log in or Create an account to join the conversation.

  • garyprather
  • garyprather's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 133
  • Thanks: 0

Re: 1100 spectre timing question

06 Aug 2011 14:44
#467245
Thanks for the information. You guys are great. I did not see the F mark but now that i know where to look I will check that. Thanks for the picture that helps alot.

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: 1100 spectre timing question

06 Aug 2011 14:44
#467246
The mechanical ignition advancer should be cleaned and lubricated as it has many moving parts. I've found that a light oil like 3-in-one or sewing machine oil works well for this. Just a drop or two on the weight pivots,spring mounting places and the shaft is about all that's needed to keep it operating.

Make note of how it's assembled, and mounted on the end of the crankshaft as it can be re-assembled 180 degrees out.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: 1100 spectre timing question

06 Aug 2011 15:33 - 06 Aug 2011 15:37
#467253
1973 Z1
KZ900 LTD
Last edit: 06 Aug 2011 15:37 by Patton.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum