.
- KZ250LTD
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1311
- Thanks: 16
Last edit: 13 Feb 2012 18:09 by KZ250LTD.
Please Log in or Create an account to join the conversation.
- KZ250LTD
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1311
- Thanks: 16
Last edit: 13 Feb 2012 18:08 by KZ250LTD.
Please Log in or Create an account to join the conversation.
- KZ250LTD
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1311
- Thanks: 16
Last edit: 13 Feb 2012 18:09 by KZ250LTD.
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: Smokey McSmokerson: Now with Video!
06 Aug 2011 23:13
Tim, did you paint any of the engine parts when you had it apart? I did, and mine smoked like that for a few minutes when I first started it. I figured it was a combo of the paint, assembly lube that didn't get inside the motor, and grease on the exhaust gaskets. I'm pretty sure mine stopped after the first 30 minutes or so. Is your crankcase breather hooked up properly? That could do it too, and it would never stop.
Make sure to keep a fan blowing on that motor if you letting it sit in the garage running for any length of time.
Make sure to keep a fan blowing on that motor if you letting it sit in the garage running for any length of time.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Smokey McSmokerson: Now with Video!
06 Aug 2011 23:15 - 06 Aug 2011 23:17
Ive seen that before with paints, polish/waxes, oil, gasket greese, etc. Burning off.
Like the norm, I would run it for a good while with a large fan on high pointed right at her and keep an eye on temps (if you can).
Sure the timing and everything is correct? Runs good right? Nice low rpm - the top end will get considerably hotter right near the plugs and out, much more than the bottom end.
It should burn off and stop in short time.
Cheers.
Like the norm, I would run it for a good while with a large fan on high pointed right at her and keep an eye on temps (if you can).
Sure the timing and everything is correct? Runs good right? Nice low rpm - the top end will get considerably hotter right near the plugs and out, much more than the bottom end.
It should burn off and stop in short time.
Cheers.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Last edit: 06 Aug 2011 23:17 by TeK9iNe.
Please Log in or Create an account to join the conversation.
- jonnybravo
-
- Offline
- Banned
-

Registered
- Posts: 518
- Thanks: 18
Re: Smokey McSmokerson: Now with Video!
06 Aug 2011 23:20+1 on that I freaked on mine till I figured out that what it was supposed to do, some paint requires heat, cool , heat again. cool, I think mine was VHTtestarossa wrote: Tim, did you paint any of the engine parts when you had it apart? I did, and mine smoked like that for a few minutes when I first started it. I figured it was a combo of the paint, assembly lube that didn't get inside the motor, and grease on the exhaust gaskets. I'm pretty sure mine stopped after the first 30 minutes or so. Is your crankcase breather hooked up properly? That could do it too, and it would never stop.
Make sure to keep a fan blowing on that motor if you letting it sit in the garage running for any length of time.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
