Clutch Plates Slipping?
- davehayward1
-
Topic Author
- Offline
- User
-

Registered
- Posts: 36
- Thanks: 1
Clutch Plates Slipping?
07 Aug 2011 16:03
My '81 KZ 750 LTD "over revs" occasionally when I give it
the gas, and it takes a second or two for the bike to
speed up to catch up with the engine
I'm thinking the clutch may be slipping and needs adjustment
(I have looked at the plates fairly recently and think they are ok)
When I adjust the set screw on the lower left of the bike, should
I tighten (clockwise) or loosen (counter-clockwise)?
Or - - -should I be considering some other reason for this problem?
the gas, and it takes a second or two for the bike to
speed up to catch up with the engine
I'm thinking the clutch may be slipping and needs adjustment
(I have looked at the plates fairly recently and think they are ok)
When I adjust the set screw on the lower left of the bike, should
I tighten (clockwise) or loosen (counter-clockwise)?
Or - - -should I be considering some other reason for this problem?
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Clutch Plates Slipping?
07 Aug 2011 16:16
What grade/type of oil being used? "Car Oils" for the most part contain friction modifers, not compatable with starter and wet plate clutches in motorcycles. Oil is Oil does not apply to bikes..
Best Oils To Use In Your Bike (Just My Opinion)
Engine oil : The commercial grade oils are clearly superior to the mass market oils. For the best protection in your bike or car, use Shell Rotella Synthetic, available at Wal-Mart in blue containers . For the best petroleum oil you can buy, get Shell Rotella T, Mobil Delvac 1300, or Chevron Delo 400, available at any auto parts store. On the back of most oil cans is a circular stamp with the certification. Avoid oils that say "energy conserving" in the bottom half of the donut. These oils contain friction modifier additives that could cause clutch slipping over time. The EPA mandated certain gas mileage, so the auto makers turned to the oil manufacturers who came up with friction modifiers of the oil to meet these new standards. All XXw-20 and XXw-30 oils are energy conserving, and should not be used in your motorcycle. Don't buy any oil additives like STP or Slick-50. Here's several listings on all about oil justifying these conclusions.
The Recommended Synthetic Oils :
Shell Rotella Synthetic
5w-40 Delvac 1 Synthetic
5w-40 Mobil-1 SUV/Truck Synthetic
5w-40 AMSOil AMF Synthetic (pricey, but it’s your money)
10w-40 Golden Spectro Synthetic
10w-50 Motul 5100 Synthetic
10w-40 Mobil-1 Synthetic
15w-50 Mobil-1 MX4T Synthetic
The best synthetics are: (in no particular order)
Shell Rotella-T Synthetic 5w-40 (blue container is synthetic, white is dino), gallon at Wal-Mart.
Mobil Delvac-1 5w-40 (grey container is synthetic, not black which is dino), gallon at Petro stations, gallon at Farm and Fleet.
Mobil-1 SUV 5w-40, qt anywhere.
AMSOil AMF 10w-40 synthetic motorcycle oil. (again, pricey)
Golden Spectro Supreme, (no price).
Motul 5100 Ester, (no price).
Mobil-1 automotive oils all contain small amounts of moly - about 100 to 200 ppm. This can cause clutch slippage in some motorcycles. I've only heard of this being a problem in Honda Shadows.
For temperatures below -40, I strongly recommend either Mobil-1 0w-30 or the Canadian Shell 0w-40 Rotella. At these temperatures, your car is your life. Using cheap or incorrect oil is risking your life.
For temperatures below -55c, -65f, stay home. Really.
The Recommended Petroleum Oils
Chevron Delo 400 15w-40
Delvac 1300 15w-40
Shell Rotella 15w-40
The best petroleum oils are: (in no particular order)
Chevron Delo 400 15w-40 (blue container) gallon at any auto parts store, gallons at Costco.
Mobil Delvac 1300 15w-40 (black container) gallon at any auto parts store, gallons at Sam's Club.
Shell Rotella-T 15w-40 (white container) gallon at Wal-Mart or any auto parts store, gallons at Sam's Club.
Castrol 15w-40 (Green container) gallon at Wal-Mart or any auto parts store, gallons at Sam’s club.
If you live in another country, you'll have to do a bit of research to decide on an oil. Generally, any oil certified for use in a late model Volks wagon or Mercedes turbo diesel is a good choice. Another good idea is to go to a truck stop and ask the truckers about brands. Rotella is marketed all over the world, but in other countries it's called Rotella or Rimola or Helix Ultra, and the formulation may be a bit different, depending on local climate and preferences. It will likely also be a lot more expensive than it is here.
Best Oils To Use In Your Bike (Just My Opinion)
Engine oil : The commercial grade oils are clearly superior to the mass market oils. For the best protection in your bike or car, use Shell Rotella Synthetic, available at Wal-Mart in blue containers . For the best petroleum oil you can buy, get Shell Rotella T, Mobil Delvac 1300, or Chevron Delo 400, available at any auto parts store. On the back of most oil cans is a circular stamp with the certification. Avoid oils that say "energy conserving" in the bottom half of the donut. These oils contain friction modifier additives that could cause clutch slipping over time. The EPA mandated certain gas mileage, so the auto makers turned to the oil manufacturers who came up with friction modifiers of the oil to meet these new standards. All XXw-20 and XXw-30 oils are energy conserving, and should not be used in your motorcycle. Don't buy any oil additives like STP or Slick-50. Here's several listings on all about oil justifying these conclusions.
The Recommended Synthetic Oils :
Shell Rotella Synthetic
5w-40 Delvac 1 Synthetic
5w-40 Mobil-1 SUV/Truck Synthetic
5w-40 AMSOil AMF Synthetic (pricey, but it’s your money)
10w-40 Golden Spectro Synthetic
10w-50 Motul 5100 Synthetic
10w-40 Mobil-1 Synthetic
15w-50 Mobil-1 MX4T Synthetic
The best synthetics are: (in no particular order)
Shell Rotella-T Synthetic 5w-40 (blue container is synthetic, white is dino), gallon at Wal-Mart.
Mobil Delvac-1 5w-40 (grey container is synthetic, not black which is dino), gallon at Petro stations, gallon at Farm and Fleet.
Mobil-1 SUV 5w-40, qt anywhere.
AMSOil AMF 10w-40 synthetic motorcycle oil. (again, pricey)
Golden Spectro Supreme, (no price).
Motul 5100 Ester, (no price).
Mobil-1 automotive oils all contain small amounts of moly - about 100 to 200 ppm. This can cause clutch slippage in some motorcycles. I've only heard of this being a problem in Honda Shadows.
For temperatures below -40, I strongly recommend either Mobil-1 0w-30 or the Canadian Shell 0w-40 Rotella. At these temperatures, your car is your life. Using cheap or incorrect oil is risking your life.
For temperatures below -55c, -65f, stay home. Really.
The Recommended Petroleum Oils
Chevron Delo 400 15w-40
Delvac 1300 15w-40
Shell Rotella 15w-40
The best petroleum oils are: (in no particular order)
Chevron Delo 400 15w-40 (blue container) gallon at any auto parts store, gallons at Costco.
Mobil Delvac 1300 15w-40 (black container) gallon at any auto parts store, gallons at Sam's Club.
Shell Rotella-T 15w-40 (white container) gallon at Wal-Mart or any auto parts store, gallons at Sam's Club.
Castrol 15w-40 (Green container) gallon at Wal-Mart or any auto parts store, gallons at Sam’s club.
If you live in another country, you'll have to do a bit of research to decide on an oil. Generally, any oil certified for use in a late model Volks wagon or Mercedes turbo diesel is a good choice. Another good idea is to go to a truck stop and ask the truckers about brands. Rotella is marketed all over the world, but in other countries it's called Rotella or Rimola or Helix Ultra, and the formulation may be a bit different, depending on local climate and preferences. It will likely also be a lot more expensive than it is here.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- magnumman
-
- Offline
- User
-

Registered
- Posts: 1
- Thanks: 0
Re: Clutch Plates Slipping?
07 Aug 2011 16:29
Then again, maybe you simply need a new set of clutchplates. They do need replaced from time to time. That's why they're for sale. When you say they looked okay, what do you mean? Are they within tolerance? They may well look superb but still be scrap.
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Clutch Plates Slipping?
07 Aug 2011 16:33 - 09 Aug 2011 22:00davehayward1 wrote: My '81 KZ 750 LTD "over revs" occasionally when I give it
the gas, and it takes a second or two for the bike to
speed up to catch up with the engine
I'm thinking the clutch may be slipping and needs adjustment
(I have looked at the plates fairly recently and think they are ok)
When I adjust the set screw on the lower left of the bike, should
I tighten (clockwise) or loosen (counter-clockwise)?
Or - - -should I be considering some other reason for this problem?
Adjust cable at handlebar to allow slack.
Remove the push rod adjuster cover plate.
Loosen the lock nut.
Turn adjuster screw counter-clockwise until it seats.
Turn adjuster screw clock wise 1/4~1/2 turn.
Adjust cable slack at handlebar to remove most of the slack (but leave a little slack).
Replace the cover plate.
Test ride.
Let us know whether this helps.
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 09 Aug 2011 22:00 by Patton.
Please Log in or Create an account to join the conversation.
- zed810
-
- Offline
- User
-

Registered
- Posts: 40
- Thanks: 0
Re: Clutch Plates Slipping?
09 Aug 2011 18:59
i agree totally with patton adjusting the push rod should sort your slip right out
1981 z750e1 gpz 750a1 tank and side panels 810 bore kit web cams mikuni bs34 vance and hines pipe
Please Log in or Create an account to join the conversation.
- TeK9iNe
-
- Offline
- User
-

Registered
- What did you do!?!
- Posts: 2436
- Thanks: 28
Re: Clutch Plates Slipping?
09 Aug 2011 19:10
Yep, agree. Usually a proper adjust to the clutch rod pusher is all you need.
Sometimes its best to lightly seat the screw, then back it out a 1/4 turn before tightening.
Good luck.
Sometimes its best to lightly seat the screw, then back it out a 1/4 turn before tightening.
Good luck.
Motorcycle Shop Owner/Operator
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Clutch Plates Slipping?
09 Aug 2011 20:02 - 09 Aug 2011 20:04
I have NEVER seen a clutch ware out on a street bike. As mentioned, you may have used the improper oil and the plates got loaded up with either Graphite, Moli, or PTFE. These are components common in modern automotive oils. They are death to motorcycle clutch. However, you can clean it up. Here is a link
kzrider.com/forum/2-engine/367700-refurbishing-your-clutch
Also the clutch springs get week with age. They last only about 5-6 years before they start loosing tension. If your clutch rod was over tightened to cause your clutch to slip, you would have known it by know. They will friction weld themselves to the adjustment bolt and than blow out threw your sidecover. I know I have done it. Clean the clutch plates, replace the springs ($15)Install the proper motor oil. Do not use a standard automotive oil. My suggestion would be Shell Rotella-T, which you can buy at Wall-Mart or any "big box" auto parts store.
kzrider.com/forum/2-engine/367700-refurbishing-your-clutch
Also the clutch springs get week with age. They last only about 5-6 years before they start loosing tension. If your clutch rod was over tightened to cause your clutch to slip, you would have known it by know. They will friction weld themselves to the adjustment bolt and than blow out threw your sidecover. I know I have done it. Clean the clutch plates, replace the springs ($15)Install the proper motor oil. Do not use a standard automotive oil. My suggestion would be Shell Rotella-T, which you can buy at Wall-Mart or any "big box" auto parts store.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 09 Aug 2011 20:04 by otakar.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
