Exhaust
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Exhaust
07 Aug 2011 23:52
I have checked various threads here and have seen all kinds of exhausts (stock, aftermarket, custom). After reading several posts on this subject, I had a question.
I have a Vance and Hines exhaust (4 into 1) on my bike, but one of the POs must have removed the logo leaving 2 rivet holes on it. The headers are a little worse for wear (discolored up top and some rust underneath). I was thinking about having the headers blasted and done flat black.
Is it possible to plug the rivet holes in exhaust if I'm going to blast chrome and paint exhaust anyway? If so, what should I use to plug the rivet holes? I would want to sand it down flush with the rest of the exhaust before it is painted so it doesn't show.
Or I guess I could just blast and paint the headers and get some new muffler to slip-on to the headers.
It probably isn't a good idea to just run with the headers and brace the collector to the bottom/side of the frame is it? I've read where this can ruin valves. Would be loud as hell too.
I have a Vance and Hines exhaust (4 into 1) on my bike, but one of the POs must have removed the logo leaving 2 rivet holes on it. The headers are a little worse for wear (discolored up top and some rust underneath). I was thinking about having the headers blasted and done flat black.
Is it possible to plug the rivet holes in exhaust if I'm going to blast chrome and paint exhaust anyway? If so, what should I use to plug the rivet holes? I would want to sand it down flush with the rest of the exhaust before it is painted so it doesn't show.
Or I guess I could just blast and paint the headers and get some new muffler to slip-on to the headers.
It probably isn't a good idea to just run with the headers and brace the collector to the bottom/side of the frame is it? I've read where this can ruin valves. Would be loud as hell too.
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Exhaust
08 Aug 2011 00:10
Rivets will plug holes, just make sure they are of the short variety as longer ones may prevent removal & repacking of the baffle.
I would not run with just the headers as 1. It will attract undue attention from the LEO's and 2. It will affect engine performance,possibly buring valves/overheating the engine.
I would not run with just the headers as 1. It will attract undue attention from the LEO's and 2. It will affect engine performance,possibly buring valves/overheating the engine.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Re: Exhaust
08 Aug 2011 00:15
Thanks for the info. Thought the header option was a bad idea too.
I saw a shorty glass pack type muffler on jcwhitney site for like 30 bucks. Was a universal fit with removable baffles. Not sure of quality though.
I saw a shorty glass pack type muffler on jcwhitney site for like 30 bucks. Was a universal fit with removable baffles. Not sure of quality though.
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
- Cuff
-
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Re: Exhaust
08 Aug 2011 00:28 - 08 Aug 2011 00:31
You could go super cheap like me. 1-3/4" baffles fit perfect.
kzrider.com/forum/10-new-members/410351-...al?limit=20&start=20
www.bigtoppowersports.com/eshopprod_cat_...EEL_PIPE_BAFFLES.htm
www.summitracing.com/parts/JEX-A3009S/
kzrider.com/forum/10-new-members/410351-...al?limit=20&start=20
www.bigtoppowersports.com/eshopprod_cat_...EEL_PIPE_BAFFLES.htm
www.summitracing.com/parts/JEX-A3009S/
Last edit: 08 Aug 2011 00:31 by Cuff.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Exhaust
08 Aug 2011 07:49 - 08 Aug 2011 07:49
I haven't burned a valve.It might be too loud for where you live but I have sit at red lights beside the locals and they haven't pulled me over for pipes. Roy
1979 LTD Street Fighter.1977 KZ1000
Last edit: 08 Aug 2011 07:49 by roy-b-boy-b.
Please Log in or Create an account to join the conversation.
- Rotten Egg
-
- Offline
- User
-

Registered
- Posts: 52
- Thanks: 0
Re: Exhaust
08 Aug 2011 10:59
Lets see some pics of your setup.
I have the Vance & Hines as well (black with alum canister), prolly the same as yours.
If you rivet and sand flush, I would think the rivet could fall in. Maybe if you use an aluminum rivet that requires hammering / mushrooming, & dont sand completely flush it may work.
Or you could make a new logo plate. I was thinking of doing the same since my logo isn't perfect.
You could have one laser / water / plasma cut to say whatever you want. It's possible that vinyl letters would work too, but not sure if they'll stand up to the heat.
Here's mine
I have the Vance & Hines as well (black with alum canister), prolly the same as yours.
If you rivet and sand flush, I would think the rivet could fall in. Maybe if you use an aluminum rivet that requires hammering / mushrooming, & dont sand completely flush it may work.
Or you could make a new logo plate. I was thinking of doing the same since my logo isn't perfect.
You could have one laser / water / plasma cut to say whatever you want. It's possible that vinyl letters would work too, but not sure if they'll stand up to the heat.
Here's mine
76 kz900
Please Log in or Create an account to join the conversation.
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Re: Exhaust
08 Aug 2011 15:41
Here are some pics:
Attachment 002.JPG not found
Attachment 004_2011-08-08.JPG not found
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
- Rotten Egg
-
- Offline
- User
-

Registered
- Posts: 52
- Thanks: 0
Re: Exhaust
08 Aug 2011 15:51
I see. Very different from mine.
You might be able to replace the logo plate thru V & H.
I recently heard that the proper method of painting chrome is to blue it first. Not sure if there are other methods, I'm sure people here would have some good advice
You might be able to replace the logo plate thru V & H.
I recently heard that the proper method of painting chrome is to blue it first. Not sure if there are other methods, I'm sure people here would have some good advice
76 kz900
Please Log in or Create an account to join the conversation.
- hocbj23
-
- User
-

Public
- Thanks: 0
Re: Exhaust
08 Aug 2011 16:00
When I refinished the Kerker for my Radian,I found some guy on Ebay that had some old exhaust labels.I then used a couple of the Button head allen screws and reattached the label that way. Hasnt fallen off yet and looks original..bj
Please Log in or Create an account to join the conversation.
- moneypit
-
- Offline
- User
-

Registered
- Posts: 389
- Thanks: 35
Re: Exhaust
08 Aug 2011 22:31
If your going to paint it anyway. How about JB Weld Push a little through the holes and sand it flush as you have dimples from the name plate it should end up pretty good
2-76 kz900
St Paul MN
St Paul MN
Please Log in or Create an account to join the conversation.
- gwolever
-
Topic Author
- Offline
- User
-

Registered
- Posts: 237
- Thanks: 8
Re: Exhaust
08 Aug 2011 22:38
Thanks for the suggestions guys. Some great ideas.
1982 KZ1000 CSR
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
