Tach wire mounting hole plug
- oldschoolbobber
-
Topic Author
- Offline
- User
-

Registered
- Posts: 8
- Thanks: 0
Tach wire mounting hole plug
08 Aug 2011 02:57
Anybody have any ideas, or have already done so, in capping/plugging up the mounting location for the tach wire? I have a bobber so, there aren't any guages equiped on the bike. Here's a pic of what it looks like:
79 KZ750 Betty the backyard bobber
Please Log in or Create an account to join the conversation.
- riverroad
-
- Offline
- User
-

Registered
- 1980 1000LTD B4
- Posts: 842
- Thanks: 7
Re: Tach wire mounting hole plug
08 Aug 2011 11:18
I'd clean the hole out with alcohol and find some kind of rubber stopper to glue and screw in there, or course drilling a hole in the end of it to accomodste the cable drive. Then maybe cut it flush.
I wouldn't use carb cleaner because it might ruin the existing seal which looks to be leaking already.
Another way would be to clean the hole out, put car wax on the cable drive, then fill the hole with a good sealer. Pematex Right Stuff would work for that. But you'd want to let it set a few days before you fired it up.
I wouldn't use carb cleaner because it might ruin the existing seal which looks to be leaking already.
Another way would be to clean the hole out, put car wax on the cable drive, then fill the hole with a good sealer. Pematex Right Stuff would work for that. But you'd want to let it set a few days before you fired it up.
Please Log in or Create an account to join the conversation.
- TexasKZ
-
- Offline
- Platinum Member
-

Registered
- Posts: 8420
- Thanks: 2804
Re: Tach wire mounting hole plug
08 Aug 2011 12:39
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/forum/11-projects/620336...amateur-build-thread
The following user(s) said Thank You: kwaker
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Tach wire mounting hole plug
08 Aug 2011 16:53
Hello, oldschoolbobber, and WELCOME to KZr! 
Including information about bike year and model may elicit better responses.
And it's easy to put the information in your signature where it will automatically appear in posted messages.
When done, the signature information appears in all posts, past and future.
And may be changed as often as desired.
Good Fortune!
Including information about bike year and model may elicit better responses.
And it's easy to put the information in your signature where it will automatically appear in posted messages.
When done, the signature information appears in all posts, past and future.
And may be changed as often as desired.
Attachment addsig.jpg not found
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- oldschoolbobber
-
Topic Author
- Offline
- User
-

Registered
- Posts: 8
- Thanks: 0
Re: Tach wire mounting hole plug
08 Aug 2011 18:31 - 08 Aug 2011 18:33
Thanks for the responses guys. Sorry I forgot to mention the bike information, 79 KZ750.
TexasKZ...will that plug you linked, fit my bike. I see that it's for a kz900? I also updated my signature to show the appropriate information. Thanks for the post on how to set that up.
Thanks again guys,
oldschoolbobber
TexasKZ...will that plug you linked, fit my bike. I see that it's for a kz900? I also updated my signature to show the appropriate information. Thanks for the post on how to set that up.
Thanks again guys,
oldschoolbobber
79 KZ750 Betty the backyard bobber
Last edit: 08 Aug 2011 18:33 by oldschoolbobber.
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Tach wire mounting hole plug
08 Aug 2011 18:37
Maybe a freeze plug from the auto parts store will work, they come in many sizes.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: Tach wire mounting hole plug
09 Aug 2011 01:29 - 09 Aug 2011 01:35
This post is for reference to show info from kawasaki.com.
Could be mistaken, but there seem to be female threads in the cylinder head where male-threaded end of tach cable screws into against the #6 gasket.
Can't tell from the photo whether #6 and #7 are missing, or what holds #8 in position without the cable being attached.
6 92065-103 GASKET,TACHOMETER GER 1
7 92050-075 OIL SEAL 1
8 92087-009 GUIDE,TACHOMETER GEAR 1
9 670B1510 "O"RING 10MM 1
10 13223-013 GEAR,TACHOMETER
Good Fortune!
Could be mistaken, but there seem to be female threads in the cylinder head where male-threaded end of tach cable screws into against the #6 gasket.
Can't tell from the photo whether #6 and #7 are missing, or what holds #8 in position without the cable being attached.
6 92065-103 GASKET,TACHOMETER GER 1
7 92050-075 OIL SEAL 1
8 92087-009 GUIDE,TACHOMETER GEAR 1
9 670B1510 "O"RING 10MM 1
10 13223-013 GEAR,TACHOMETER
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Last edit: 09 Aug 2011 01:35 by Patton.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
