KZ750E OIL PRESSURE?

  • zed810
  • zed810's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 40
  • Thanks: 0

KZ750E OIL PRESSURE?

09 Aug 2011 18:44
#468057
HI I WAS WONDERING IF ANYONE KNOWS THE BALLPARK OIL PRESSURE FOR A 1981 KZ750E THE MOTOR IS HOPPED UP QUITE A BIT AND WANT TO PUT A GUAGE ON JUST TO CHECK (TO PUT MY MIND AT EASE!)
1981 z750e1 gpz 750a1 tank and side panels 810 bore kit web cams mikuni bs34 vance and hines pipe

Please Log in or Create an account to join the conversation.

  • JR
  • JR's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
    Registered
  • Posts: 2982
  • Thanks: 501

Re: KZ750E OIL PRESSURE?

09 Aug 2011 22:09
#468093
I think it is pretty low. Just a few PSI. The previous owner of my bike swore it was overbored and his son later said Wiseco 810 kit but who knows. Maybe if I took the head off. I also have an oil cooler. My test of oil pressure is to loosen the tach cable nut where the cable enter the vave cover - if it leaks I got pressure ;) Havn't done that in quite a while though.
1980 kz750E1, Delkevic exhaust

Please Log in or Create an account to join the conversation.

  • steell
  • steell's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6849
  • Thanks: 208

Re: KZ750E OIL PRESSURE?

10 Aug 2011 01:04
#468153
The roller bearing motors (900/1000/1100) are the ones with the really low oil pressure, the smaller motors are all plain bearing and run 30+ psi
KD9JUR

Please Log in or Create an account to join the conversation.

  • bountyhunter
  • bountyhunter's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 7245
  • Thanks: 338

Re: KZ750E OIL PRESSURE?

10 Aug 2011 02:47
#468159
I think it should be 40 - 60 psi with engine revving above 2500 rpm. At very hot idle, the pressure on older bikes can probably drop down to as low as 15 psi.
1979 KZ-750 Twin

Please Log in or Create an account to join the conversation.

  • zed810
  • zed810's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 40
  • Thanks: 0

Re: KZ750E OIL PRESSURE?

10 Aug 2011 14:46
#468220
thank you for that.
thats what i was expecting so ill screw in a pressure gauge and check just to be sure.
1981 z750e1 gpz 750a1 tank and side panels 810 bore kit web cams mikuni bs34 vance and hines pipe

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum