ide jumps way up!

  • newowner79kz750b1
  • newowner79kz750b1's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • 79 kz750b4
  • Posts: 114
  • Thanks: 0

ide jumps way up!

11 Aug 2011 13:42
#468392
i have a 79 kz750 twin. i just put a new coil in yesterday. started right up. took a for a ride. rode great other then i have to adjusting the carbs a tad to get the mixture right. any way. i was at a stop light and out of no where the idle jumped up to around 5,000 rpms and i have no idea why. before the coil i cleaned the float bowls, cleaned the jets ect. this problem has never happend until i put the new coil in. i dont think its an air leak either. not sure on what to look for or do. thanks everyone!

Please Log in or Create an account to join the conversation.

  • cobura
  • cobura's Avatar
  • Offline
  • User
  • User
    Registered
  • forever 2 wheels
  • Posts: 260
  • Thanks: 3

Re: ide jumps way up!

11 Aug 2011 13:47
#468393
Maybe....check your vaccuum lines. I had the same thing happen to me before. I was out riding and the vaccuum line slipped off the petcock. It started to suck air and revved out really high.
1979 KZ650B3

Please Log in or Create an account to join the conversation.

  • clutch
  • clutch's Avatar
  • Offline
  • User
  • User
    Registered
  • I wish I had a tad more patience to do it better!
  • Posts: 1051
  • Thanks: 13

Re: ide jumps way up!

11 Aug 2011 14:19 - 11 Aug 2011 14:19
#468398
Could be a symptom of a lean mixture. Also, on my 750 4 cyl, there is an idle speed adjustment knob under the carbs. If idle speed is set too high, it may have a high or hanging idle as well. I would check that first. :)
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I say more?)
Last edit: 11 Aug 2011 14:19 by clutch. Reason: fixed a typo! :)

Please Log in or Create an account to join the conversation.

  • Bwildcat
  • Bwildcat's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: ide jumps way up!

17 Aug 2011 17:09
#469571
Just the subject/advice I was looking for... wife wasn't happy that it started making funny noises the first day I got it...

Thanks guys.
1980 KZ750-H LTD (first bike)

Please Log in or Create an account to join the conversation.

  • Bwildcat
  • Bwildcat's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: idle jumps way up!

17 Aug 2011 23:06
#469645
Is there anywhere else that the vacuum leak could be happening? I don't even know enough to know if that sounds stupid... VERY new to the motorcycle/ shade tree mechanic business.

I played with the idle adjustment knob and got very little (false hope) response. The next time I fired it up it went right back to the 4000 RPM idle.

I also looked at both lines coming out of the fuel petcock and they look to be in pretty good shape on both ends and middle.
1980 KZ750-H LTD (first bike)

Please Log in or Create an account to join the conversation.

  • garyprather
  • garyprather's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 133
  • Thanks: 0

Re: idle jumps way up!

17 Aug 2011 23:24
#469651
If no vacuum leak is found I would look and you linkage to your carbs. If the carbs are not set right your choke will not make a difference. The bike will run as if you have the en-richer,/ choke on. The carbs would have to be way out of sync at that point though.

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • TexasKZ's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
    Registered
  • Posts: 8420
  • Thanks: 2804

Re: idle jumps way up!

18 Aug 2011 10:04
#469721
There could be a leak where the intake manifolds meet the head, where the carbs meet the intake manifolds, and the plug for the vacuum port on the other carb may have failed. With the engine running, carefully spray brake cleaner around each of these places. A sudden change in rpm will indicate a leak.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/forum/11-projects/620336...amateur-build-thread
The following user(s) said Thank You: Bwildcat

Please Log in or Create an account to join the conversation.

  • Bwildcat
  • Bwildcat's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: ide jumps way up!

19 Aug 2011 15:15
#470055
It looks like part of one of the seals (gaskets?) may have gotten sucked into the intake some. Hoping it just disintegrated and fell OUT but my 3 day history with it has gone from bad to worse so I'm not holding my breath.
1980 KZ750-H LTD (first bike)

Please Log in or Create an account to join the conversation.

  • TexasKZ
  • TexasKZ's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
    Registered
  • Posts: 8420
  • Thanks: 2804

Re: ide jumps way up!

19 Aug 2011 15:21
#470058
Which seals or gaskets do you mean? Pics might help.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD slowly moving toward resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/forum/11-projects/620336...amateur-build-thread

Please Log in or Create an account to join the conversation.

  • Bwildcat
  • Bwildcat's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: ide jumps way up!

19 Aug 2011 15:30
#470060
I'll dig around for the correct camera cable... they look like little rubber seals between the 3rd carborator and what I think is the cylinder head (sorry if I'm directing my help the wrong way, should have taken a few more shop classes :pinch: )
1980 KZ750-H LTD (first bike)

Please Log in or Create an account to join the conversation.

  • Bwildcat
  • Bwildcat's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: ide jumps way up!

19 Aug 2011 15:46
#470061
The pictures zoom into the problem (?) spot. The third picture is of the 4th carb on the outside and what the others look like. The fourth picture is the 3rd carb (the one that looks screwy).

Help?!?!

Thanks guys!
1980 KZ750-H LTD (first bike)

Please Log in or Create an account to join the conversation.

  • Bwildcat
  • Bwildcat's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 39
  • Thanks: 0

Re: ide jumps way up!

19 Aug 2011 15:50
#470062
Break it to me gentle doc... how bad is it. :(
1980 KZ750-H LTD (first bike)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum