Sprocket Change?
- Pontiacdude210
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Sprocket Change?
11 Aug 2011 19:22
I have a 1980 KZ550C and it is kind of irritating that it is a 6 speed but tops out at 100 mph and 55 mph is 4500 RPMs in 6th. It has plenty takeoff power, and I think changing the gear ratio would really help efficiency and top end speed. Are there alternative sprockets(smaller back or larger front)? Thanks for the help!
-1980 KZ550C Viper Red, Black Fenders
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Sprocket Change?
11 Aug 2011 19:39
When it tops out at 100mph is that because the engine hits the redline at that speed? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- Pontiacdude210
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: Sprocket Change?
11 Aug 2011 19:44
The engine redlines around 100 mph. 85 mph speedometer means approximation lol.
-1980 KZ550C Viper Red, Black Fenders
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Sprocket Change?
12 Aug 2011 23:47Yes, you can get any size smaller sprocket you want from sprocket specialists (or specialties?) made to size.Pontiacdude210 wrote: I have a 1980 KZ550C and it is kind of irritating that it is a 6 speed but tops out at 100 mph and 55 mph is 4500 RPMs in 6th. It has plenty takeoff power, and I think changing the gear ratio would really help efficiency and top end speed. Are there alternative sprockets(smaller back or larger front)? Thanks for the help!
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: Sprocket Change?
12 Aug 2011 23:51
Use
www.gearingcommander.com
to figure out the new ratio's.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- otakar
-
- Offline
- User
-

Registered
- Posts: 5069
- Thanks: 29
Re: Sprocket Change?
14 Aug 2011 20:02 - 14 Aug 2011 20:03
Not sure what you are expecting out of a 550. 100mph is pretty damn good. A stock 900 will do only about 115-120 tops, and it has 50-60% more HP over the 550.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 14 Aug 2011 20:03 by otakar.
Please Log in or Create an account to join the conversation.
- Pontiacdude210
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: Sprocket Change?
15 Aug 2011 16:57
Yeah here's the thing though. For a 550 I am not expecting longer gearing to really boost top end by more than a few mph(maybe 110mph as opposed to 100mph or so?). It just seems really short geared for a 6 speed and I wanted to gear it longer. When I accelerate just gradually off a stop sign I have to shift once before I'm even done turning. I don't expect a huge increase in top end but maybe not doing 6k RPMs at 70 mph? It seems like it would be reasonable to expect at cruising speed it would be doing a little less than half of the redline RPM. So what I am looking for is a 20-30% reduction of the # of teeth on the rear sprocket(or 20-30% increase on the front, or maybe a combination)to make it so at 70 it's doing 4500 RPMS and at 55 it's doing 3000 RPMs instead of 6k and 4500 RPMs respectively. A little longer between shifts and a little less strain on the engine I guess. I have only topped it out once anyway so that's not really what I'm looking for, it's a cruising bike. Anyone else here done gearing mods?
-1980 KZ550C Viper Red, Black Fenders
Please Log in or Create an account to join the conversation.
- Pontiacdude210
-
Topic Author
- Offline
- User
-

Registered
- Posts: 53
- Thanks: 0
Re: Sprocket Change?
15 Aug 2011 17:15
Did my research at gearingcommander. Thanks for the link! I am thinking -3 teeth on the rear sprocket will give me the shift points I want.
-1980 KZ550C Viper Red, Black Fenders
Please Log in or Create an account to join the conversation.
- mtbspeedfreak
-
- Offline
- User
-

Registered
- Posts: 1413
- Thanks: 36
Re: Sprocket Change?
15 Aug 2011 17:24Pontiacdude210 wrote: So what I am looking for is a 20-30% reduction of the # of teeth on the rear sprocket(or 20-30% increase on the front, or maybe a combination)to make it so at 70 it's doing 4500 RPMS and at 55 it's doing 3000 RPMs instead of 6k and 4500 RPMs respectively.
Having owned a stock LTD500, I'd caution you against such a initial step. Frankly, I'm not sure if the little bike will be able to hold 70 mph at 4500 RPM. Throw in a 20 mph headwind, you will be out of the powerband, sucking fuel and not going anywhere. I'd suggest going up one tooth on the front sprocket (I did that and got the results I wanted), but in a strong headwind, I'd have to shift to 5th to hold my speed or to make it up a hill.
2000 ZRX 1100
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
1976 KZ 900- Daily Driver
1980 LTD 550- Dalton Highway survivor!
If it has tits or tires, it'll give you problems!
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
