79 KZ1000 ST E1 cable lube
- kzboy
-
Topic Author
- Offline
- User
-

Registered
- Posts: 80
- Thanks: 0
79 KZ1000 ST E1 cable lube
14 Aug 2011 01:07
What are you all using to lube the carb and clutch cables?
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: 79 KZ1000 ST E1 cable lube
14 Aug 2011 01:14
For the clutch cable, there is a kit that has a special clamp, fitting around the disconnected(at the lever)and then the lube is squirted into the clutch cable. Most bike shops sell the cable lube kit.
Carb or throttle cables might be able to use this kit if it will tighten up,if not, some engine oil dripped through a aluminum foil funnel will work(put something to catch the excess oil at the other end of the cables).
Carb or throttle cables might be able to use this kit if it will tighten up,if not, some engine oil dripped through a aluminum foil funnel will work(put something to catch the excess oil at the other end of the cables).
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 79 KZ1000 ST E1 cable lube
14 Aug 2011 02:08
I'm cheap, I use the teflon lube above but I take the cable off and hang it up in the garage and hose from the top and let gravity do the work.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- Chaotic Reason
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 15
Re: 79 KZ1000 ST E1 cable lube
14 Aug 2011 05:28
I take a zip lock bag and cut a wee hole in one of the bottom corners, put the top of my cable in through the hole just a bit. Wrap a rubber band around it a few times to make sure nothing leaks out. And then I pour some engine oil into the bag. Hang it up for a bit, and when stuff starts to leak out from the bottom, you're done. Put the rest of the oil back into the bottle and get a new hose to repeat the process with.
But I like Patton's gizmo! I'd buy it just to try it out.
But I like Patton's gizmo! I'd buy it just to try it out.
Michael
1980 KZ1000 shaft drive
1980 KZ1000 shaft drive
Please Log in or Create an account to join the conversation.
- kzboy
-
Topic Author
- Offline
- User
-

Registered
- Posts: 80
- Thanks: 0
Re: 79 KZ1000 ST E1 cable lube
14 Aug 2011 08:31
I have something in an spray can from Lubriplate called chain and cable fluid. I said it cleans and lebricates all types of chains and cables. Any idea if this would work good?
Please Log in or Create an account to join the conversation.
- Patton
-
- Offline
- KZr Legend
-

Registered
- Posts: 18564
- Thanks: 2103
Re: 79 KZ1000 ST E1 cable lube
14 Aug 2011 11:55
No eBay APP ID and/or Cert ID defined in Kunena configurationOther sources for the cable luber gadget include the following:
www.motorcycle-superstore.com/2/9/205/48...Pro-Cable-Luber.aspx
www.amazon.com/Hp-Tools-Cable-Luber-Red/dp/B002FDKTEM
Search cable luber on ebay to find several versions listed with various pricing.
Here's one of them:
Have always used the single fastener style, which works just fine with no wait time.
Just squirts throughout the entire cable length almost instantly with very little leakage at the tool.
Although never attempted, I don't see how the Dupont Teflon product would work so well with the drip though funnel method. It's very liquid as it comes out, but within seconds the liquid evaporates, leaving a waxy, slippery feeling residue that is supposed to repel water and last a long time, and resists fling-off (on a drive chain for example).
Good Fortune!
www.motorcycle-superstore.com/2/9/205/48...Pro-Cable-Luber.aspx
www.amazon.com/Hp-Tools-Cable-Luber-Red/dp/B002FDKTEM
Search cable luber on ebay to find several versions listed with various pricing.
Here's one of them:
Have always used the single fastener style, which works just fine with no wait time.
Just squirts throughout the entire cable length almost instantly with very little leakage at the tool.
Although never attempted, I don't see how the Dupont Teflon product would work so well with the drip though funnel method. It's very liquid as it comes out, but within seconds the liquid evaporates, leaving a waxy, slippery feeling residue that is supposed to repel water and last a long time, and resists fling-off (on a drive chain for example).
Good Fortune!
1973 Z1
KZ900 LTD
KZ900 LTD
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: 79 KZ1000 ST E1 cable lube
14 Aug 2011 12:08
Harbor Freight also has the Cable lube Tool.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
