Kz750 valve shims
- MuzzleMike
-
Topic Author
- Offline
- User
-

Registered
- Rice Only
- Posts: 164
- Thanks: 1
Kz750 valve shims
17 Aug 2011 00:20
I was look into my valves do to the backfiring throw the carbs and exhaust and there where no space for my feelers . I went throw the manual and step by step took it a part and found out that the intake has 2.50 in all 4 and the exhaust has the same . My question is . Is this common ? It looks that I am going to buying the 2.35 that the manual tells me to .
PS does any one need 8 2.50 shims ?
Mike
PS does any one need 8 2.50 shims ?
Mike
82 KZ750 LTD H3
Please Log in or Create an account to join the conversation.
- Harvey1327
-
- Offline
- User
-

Registered
- Posts: 138
- Thanks: 9
Re: Kz750 valve shims
17 Aug 2011 01:33
keepem you might need them down the track.
1 x 77 Z1000
1080,cams,ported
29 smoothbores,
Akron rims,Martin Swingarm
1 x 77 Z1000
1327 Wiseco,cams
ported,34.5 S/bores
GSXR swingarm
RF900 frontend.
1 x 2008 Nightrain
shotgun shock,corbin
seat,fat bars,some bling.
www.kzrider.com/media/kunena/attachments/8119/IMG_0461.JPG
1080,cams,ported
29 smoothbores,
Akron rims,Martin Swingarm
1 x 77 Z1000
1327 Wiseco,cams
ported,34.5 S/bores
GSXR swingarm
RF900 frontend.
1 x 2008 Nightrain
shotgun shock,corbin
seat,fat bars,some bling.
www.kzrider.com/media/kunena/attachments/8119/IMG_0461.JPG
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Kz750 valve shims
17 Aug 2011 03:55 - 17 Aug 2011 03:55
If it's the four cylinder, I think those shims are still available online in shim kits. If you plan to keep the bike, might want to invest in one. They don't cost that much and you never have to go scrounging for shims again. Shims are expensive if you have to buy them one off.
1979 KZ-750 Twin
Last edit: 17 Aug 2011 03:55 by bountyhunter.
Please Log in or Create an account to join the conversation.
- MuzzleMike
-
Topic Author
- Offline
- User
-

Registered
- Rice Only
- Posts: 164
- Thanks: 1
Re: Kz750 valve shims
17 Aug 2011 16:38
I went back out to my Hot box of a garage and put the cams back on and got my hands on a better set of feelers . I thought a set off cheep auto would do but No . The intake on one had no room but the others did I took them back a part and took the shims out one by one and looked at them with under a magnify glass with good light . Yesterday after pulling them and seeing that 4 out of 8 where clearly stamped at 2.50 and at the most I could see 2 or 2.5 I thought those had to be the same but today in good light with a glass I found out that one was a 2.55 and the others where 2.40 and 2.45 . I went back to my paper that I had written everything down and thought what do I have here . I looked and found that I could switch some around . I might end up doing work twice but Only one valve would be close and it would be an exhaust . I will rather it come out of the exhaust then the intake . I can not believe that so little make so much of a difference .
What started this off today was I hit the net today and looked for shim kits and found that most of the kits only have 4 shims per size . Yes it is cheaper to buy them that way if you only need 4 of that size . It also blow my mind that I thought all where the same size . This way I might have to buy 1 .
Mike
What started this off today was I hit the net today and looked for shim kits and found that most of the kits only have 4 shims per size . Yes it is cheaper to buy them that way if you only need 4 of that size . It also blow my mind that I thought all where the same size . This way I might have to buy 1 .
Mike
82 KZ750 LTD H3
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
