Porting Heads
- cavanaughracing
-
- Offline
- User
-

Registered
- Posts: 213
- Thanks: 25
Re: Porting Heads
20 Aug 2011 09:30 - 20 Aug 2011 09:40JEFFG1 wrote: wireman i smell what your cookin you wouldnt happen to have the recipe for that would you? i plan on doing mine this winter the one you just described is the one i want :woohoo:
1197cc 10.25:1 pistons
95 CFM Head with 37/30 valves [J intakes]
RS36 Flat Slides [because they're easily obtained] Don't bother with 34's....go right to 36
Cam Motion Z1 Grind Cams, APE K410 cams or there are several Web Grinds I can point you to.
That combo will put a big fat smile on your face. Shift each gear before 3000 RPM....roll it on..let 'er eat
Whole motor has to come down. Cases Bored, Block Sleeved & bored. New cam chain & rollers, etc.
Have Pearson go through the crank. Put it together with Heavy Duty crank studs, cylinder studs and nuts. Jay has those parts. I use them in everything I build because they work.
Larry C.
cavanaughracing.com
cavanaughracing.com
Last edit: 20 Aug 2011 09:40 by cavanaughracing.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Porting Heads
20 Aug 2011 09:40
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- cavanaughracing
-
- Offline
- User
-

Registered
- Posts: 213
- Thanks: 25
Re: Porting Heads
20 Aug 2011 10:58wireman wrote: if i had omr's money id just blow mine on booze and lottery tickets! :woohoo:
hes still living off his village people roadshow royalties! :sick: :woohoo:
Don't believe there are still indians running around in Nebraska? Well here's proof Mr. :woohoo:
Larry C.
cavanaughracing.com
cavanaughracing.com
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Porting Heads
20 Aug 2011 11:16
"if i had omr's money".........
Right, I'm so well off in the $$$ I work cause I like people
.... :pinch: :whistle: :sick:
I'm a people person.... :laugh: :laugh: :laugh:
Right, I'm so well off in the $$$ I work cause I like people
I'm a people person.... :laugh: :laugh: :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Porting Heads
20 Aug 2011 16:42
So have you had that thing down the track with the new motor Roy?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- nads.com
-
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
Re: Porting Heads
21 Aug 2011 04:17cavanaughracing wrote:JEFFG1 wrote: wireman i smell what your cookin you wouldnt happen to have the recipe for that would you? i plan on doing mine this winter the one you just described is the one i want :woohoo:
1197cc 10.25:1 pistons
95 CFM Head with 37/30 valves [J intakes]
RS36 Flat Slides [because they're easily obtained] Don't bother with 34's....go right to 36
Cam Motion Z1 Grind Cams, APE K410 cams or there are several Web Grinds I can point you to.
That combo will put a big fat smile on your face. Shift each gear before 3000 RPM....roll it on..let 'er eat
Whole motor has to come down. Cases Bored, Block Sleeved & bored. New cam chain & rollers, etc.
Have Pearson go through the crank. Put it together with Heavy Duty crank studs, cylinder studs and nuts. Jay has those parts. I use them in everything I build because they work.
Now Here we go... from 68 to 95cfm. And your all saying don't take too much off!
Don't bother running 34's or bigger cuz the port size is not even that big (yeah you plumin)
And the all famous.. Those carbs are waay too big for THAT MOTOR!
EHEM..
And you don't want to make it too big....
So you grind and sink the seat and pop in some bigger valves.
Gotta remembers, just because the arms feel like ripping out of the sockets..
Doesn't mean the bike has a tremendous amount of pull..
It's because your rotator cuffs are shot from pulling on it most of your lives.
And remember, MAKE IT BIGGER SPIN IT FASTER, etc. etc. LARRY.
HUH. well I'm just darned stumped now.
SO she gets up and going at 3000?
ANd, just where does all the this power stop (oh yeah somewhere after seven.
NO. It's because at 7 the arthritis is so bad..:woohoo:
So. I pat you boys on the head, give you cookies and milk and swwwweeeeeet dreams.
WHen you come to me with one arm ripped out it's socket, no more than a thimbles worth
of shavings from your head port, prove to me that you can SEE.. (8on the tack can look
like a 3) and somehow make the 36's look like 24's.
I'm just thinking .. and shaking my head.. and watching ..
Till the traffic clears so I can rip out down the road.
like it was MEANT to be.
Or I could help a monkey
Over and over
Till I died
If I made my motor breath out of a straw the velocity would go up
My penis would remain stationary
until something REALLY happened.
Slurping a bowl of wheaties staring at bs34's on the table in front of me.
Depressing, knowing they are waay too big.
But wondering if it's all been a pack of lies.
steal MY blues will ya!
Please Log in or Create an account to join the conversation.
- nads.com
-
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
Re: Porting Heads
21 Aug 2011 04:29cavanaughracing wrote:JEFFG1 wrote: wireman i smell what your cookin you wouldnt happen to have the recipe for that would you? i plan on doing mine this winter the one you just described is the one i want :woohoo:
1197cc 10.25:1 pistons
95 CFM Head with 37/30 valves [J intakes]
RS36 Flat Slides [because they're easily obtained] Don't bother with 34's....go right to 36
Cam Motion Z1 Grind Cams, APE K410 cams or there are several Web Grinds I can point you to.
That combo will put a big fat smile on your face. Shift each gear before 3000 RPM....roll it on..let 'er eat
Whole motor has to come down. Cases Bored, Block Sleeved & bored. New cam chain & rollers, etc.
Have Pearson go through the crank. Put it together with Heavy Duty crank studs, cylinder studs and nuts. Jay has those parts. I use them in everything I build because they work.
Now Here we go... from 68 to 95cfm. And your all saying don't take too much off!
Don't bother running 34's or bigger cuz the port size is not even that big (you plummen)
And the all famous.. Those carbs are waay too big for THAT MOTOR!
EHEM..
And you don't want to make it too big you say?
So you grind and sink the seat and pop in some bigger valves.
Gotta remember, just because the arms feel like ripping out of the sockets..
Doesn't mean the bike has a tremendous amount of pull,
It's because your rotator cuffs are shot from pulling on it most of your lives!
And remember, MAKE IT BIGGER SPIN IT FASTER, etc. etc. (Larry)
HUH :blink: well I'm just darned stumped now.
SO she gets up and going at 3000?
And, just where does all the this power stop? (oh yeah somewhere after seven).
NO. It's because at 7 oclock the arthritis is so bad..:woohoo:
So. I pat you boys on the head, give you cookies and milk and say sweet dreams.
When you come to me with one arm ripped out it's socket, no more than a thimbles worth
of shavings from your head port, and prove to me that you can SEE.. (8on the tack can look
like a 3) and somehow make the 36's look like 24's... I'll be :blush:
I'm just thinking .. and shaking my head.. and watching ..
Till the traffic clears so I can rip out down the road.
like it was MEANT to be.
Or I could help dress the monkey
Over and over
Till I died
If I made my motor breath out of a straw the velocity would go up sure..
My penis would remain stationary however,
until something REALLY happened.
Slurping a bowl of wheaties staring at bs34's on the table in front of me.
Depressing thought, they are waay too big.
But wondering if it's all been a pack of lies.
Are you guys gonna make sense one day?
All the sudden it's 36's right off the bat!
Don't even stop at 33 34, just go straight to the lunch line :laugh:
I seriously need to beat up some old school bikes
cuz I can :evil:
You guys got it coming anyway you know that
Trying to steal are blues
Please Log in or Create an account to join the conversation.
- cavanaughracing
-
- Offline
- User
-

Registered
- Posts: 213
- Thanks: 25
Re: Porting Heads
21 Aug 2011 08:01 - 21 Aug 2011 08:04nads.com wrote:cavanaughracing wrote:JEFFG1 wrote: wireman i smell what your cookin you wouldnt happen to have the recipe for that would you? i plan on doing mine this winter the one you just described is the one i want :woohoo:
1197cc 10.25:1 pistons
95 CFM Head with 37/30 valves [J intakes]
RS36 Flat Slides [because they're easily obtained] Don't bother with 34's....go right to 36
Cam Motion Z1 Grind Cams, APE K410 cams or there are several Web Grinds I can point you to.
That combo will put a big fat smile on your face. Shift each gear before 3000 RPM....roll it on..let 'er eat
Whole motor has to come down. Cases Bored, Block Sleeved & bored. New cam chain & rollers, etc.
Have Pearson go through the crank. Put it together with Heavy Duty crank studs, cylinder studs and nuts. Jay has those parts. I use them in everything I build because they work.
Now Here we go... from 68 to 95cfm. And your all saying don't take too much off!
Don't bother running 34's or bigger cuz the port size is not even that big (you plummen)
And the all famous.. Those carbs are waay too big for THAT MOTOR!
EHEM..
And you don't want to make it too big you say?
So you grind and sink the seat and pop in some bigger valves.
Gotta remember, just because the arms feel like ripping out of the sockets..
Doesn't mean the bike has a tremendous amount of pull,
It's because your rotator cuffs are shot from pulling on it most of your lives!
And remember, MAKE IT BIGGER SPIN IT FASTER, etc. etc. (Larry)
HUH :blink: well I'm just darned stumped now.
SO she gets up and going at 3000?
And, just where does all the this power stop? (oh yeah somewhere after seven).
NO. It's because at 7 oclock the arthritis is so bad..:woohoo:
So. I pat you boys on the head, give you cookies and milk and say sweet dreams.
When you come to me with one arm ripped out it's socket, no more than a thimbles worth
of shavings from your head port, and prove to me that you can SEE.. (8on the tack can look
like a 3) and somehow make the 36's look like 24's... I'll be :blush:
I'm just thinking .. and shaking my head.. and watching ..
Till the traffic clears so I can rip out down the road.
like it was MEANT to be.
Or I could help dress the monkey
Over and over
Till I died
If I made my motor breath out of a straw the velocity would go up sure..
My penis would remain stationary however,
until something REALLY happened.
Slurping a bowl of wheaties staring at bs34's on the table in front of me.
Depressing thought, they are waay too big.
But wondering if it's all been a pack of lies.
Are you guys gonna make sense one day?
All the sudden it's 36's right off the bat!
Don't even stop at 33 34, just go straight to the lunch line :laugh:
I seriously need to beat up some old school bikes
cuz I can :evil:
You guys got it coming anyway you know that
Trying to steal are blues
Larry C.
cavanaughracing.com
cavanaughracing.com
Last edit: 21 Aug 2011 08:04 by cavanaughracing.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Porting Heads
21 Aug 2011 08:23 - 21 Aug 2011 08:26
:whistle:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 21 Aug 2011 08:26 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Porting Heads
21 Aug 2011 09:25
Just for you Nads.... :laugh:
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- cavanaughracing
-
- Offline
- User
-

Registered
- Posts: 213
- Thanks: 25
Re: Porting Heads
21 Aug 2011 09:26 - 21 Aug 2011 12:49
Ok...Nads....what's your piston getting for air at 74 degrees ATDC?
That's where the piston starts shouting at you for more 
It's no fun to ride it if the valve tries to hide it,
If the lobe ain't in time the combo won't rhyme,
If the carbs are too small the air hits a wall,
If the carbs are too big, below 5k it's a pig,
If the lobes are too fat, the midrange is flat,
Think McDonalds my boy....order the Deluxe Combo :woohoo:
It's no fun to ride it if the valve tries to hide it,
If the lobe ain't in time the combo won't rhyme,
If the carbs are too small the air hits a wall,
If the carbs are too big, below 5k it's a pig,
If the lobes are too fat, the midrange is flat,
Think McDonalds my boy....order the Deluxe Combo :woohoo:
Larry C.
cavanaughracing.com
cavanaughracing.com
Last edit: 21 Aug 2011 12:49 by cavanaughracing.
Please Log in or Create an account to join the conversation.
- jonnybravo
-
- Offline
- Banned
-

Registered
- Posts: 518
- Thanks: 18
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
