Porting Heads
- roy-b-boy-b
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Porting Heads
19 Aug 2011 18:53
Being the poor and cheap man that I am,I can only dream of sending my head to Larry and having a nice port job done.
I had a extra head last winter and on several occasions I would remove the casting flaws and sand,sand,sand.
I installed this head on my bike when I removed the Andrews cams and I promise you there is a huge diffrence in the way the bike runs.
I just done a small amount of work compared to a professional. I could just imagine how much better the bike would run with some bucks spent on the head. Roy
I had a extra head last winter and on several occasions I would remove the casting flaws and sand,sand,sand.
I installed this head on my bike when I removed the Andrews cams and I promise you there is a huge diffrence in the way the bike runs.
I just done a small amount of work compared to a professional. I could just imagine how much better the bike would run with some bucks spent on the head. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Porting Heads
19 Aug 2011 20:17
a guy can never go wrong removing too little material,its when you remove too much that life gets complicated!
ask me how i know this! :woohoo:
ive always said the best dyno is in the seat of your pants when you crack the throttle,keep up the good work Roy!
ask me how i know this! :woohoo:
ive always said the best dyno is in the seat of your pants when you crack the throttle,keep up the good work Roy!
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Porting Heads
19 Aug 2011 21:01
I deduct that you are cheap too? :whistle:
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- cavanaughracing
-
- Offline
- User
-

Registered
- Posts: 213
- Thanks: 25
Re: Porting Heads
19 Aug 2011 21:10
Hell Roy.... all you had to do was ask and I would have given you measurements to go by
Larry C.
cavanaughracing.com
cavanaughracing.com
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Porting Heads
19 Aug 2011 23:34tighter than 2 coats of paint! :laugh:roy-b-boy-b wrote: I deduct that you are cheap too? :whistle:
i just never had much patience waiting for other people to do things for me,but as i get older ive learned many of my own limitations the hard/expensive way! :woohoo:
as ive said many times on here a motor with big cams/big ports and big carbs that makes power from 7000-9000 rpms might be a riot on the track ,but a low buck big inch motor that starts pulling from around 2500/3000 and is still trying to dislocate your arms at 7000 rpms is a lot more fun every place else
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- JEFFG1
-
- Offline
- User
-

Registered
- Posts: 341
- Thanks: 16
Re: Porting Heads
20 Aug 2011 00:24
wireman i smell what your cookin you wouldnt happen to have the recipe for that would you? i plan on doing mine this winter the one you just described is the one i want :woohoo:
1976 KZ 900 PRO STREET 1977 kz1000 dragbike project
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Porting Heads
20 Aug 2011 03:35
Bottem of the front page of my web site
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Porting Heads
20 Aug 2011 09:03 - 20 Aug 2011 09:05
Plumi's so tight you couldn't get a greased cat hair through his ass.... :pinch: :whistle:
BTW Roy, you taking pictures as you go ( Pre & Post porting)?
BTW Roy, you taking pictures as you go ( Pre & Post porting)?
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 20 Aug 2011 09:05 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Porting Heads
20 Aug 2011 09:07 - 20 Aug 2011 09:10
if i had omr's money id just blow mine on booze and lottery tickets! :woohoo:
hes still living off his village people roadshow royalties! :sick: :woohoo:
hes still living off his village people roadshow royalties! :sick: :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Last edit: 20 Aug 2011 09:10 by wireman.
Please Log in or Create an account to join the conversation.
- jonnybravo
-
- Offline
- Banned
-

Registered
- Posts: 518
- Thanks: 18
Re: Porting Heads
20 Aug 2011 09:09wireman wrote: if i had omr's money id just blow mine on booze and lottery tickets! :woohoo:
shit man Jim's got the first penny he ever pinched and Lincolns face has a thumb print on it :woohoo:
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Porting Heads
20 Aug 2011 09:18
R-E-T-I-R-E-M-E-N-T R-O-C-K-S S-U-C-K-E-R-S :woohoo:
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- jonnybravo
-
- Offline
- Banned
-

Registered
- Posts: 518
- Thanks: 18
Re: Porting Heads
20 Aug 2011 09:29
I had a 73 Z1 about 12 years ago, it had a 1045 kit and no head work, it would go !!!! BUT, the one I have now has a 1015 kit and head by Larry and its a totally different game, m ore pizazz, less displacement, it aint all about bore
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
