Cam Chian Replacement?
- Cuff
-
Topic Author
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Cam Chian Replacement?
24 Aug 2011 04:26 - 24 Aug 2011 04:27Not on my 750 twin. There is very little clearance going down through the cases and around the crankshaft gear and back up. It might be possible but you would have to drop the oil pan and see if the path is fully accessible going around. I doubt it.Cuff wrote:bountyhunter wrote:I know people have done it with the "master link" replacement chains. You split the old chain and wire the end of the new one to the end of the old one and slowly pull it around the crank gear and back up by turning the crankshaft with a wrench.Cuff wrote: Hell all,
Sorry but my search force is weak and can't find any posts about changing the cam chain without opening up the motor. So, my question is this, can you fish a new cam chain using the old one as a guide?
Thanks for the sugestion but I'm wondering if you can do this without moving the crank?
1979 KZ-750 Twin
Last edit: 24 Aug 2011 04:27 by bountyhunter.
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: Cam Chian Replacement?
24 Aug 2011 08:57
If you do not remove the cams DO NOT turn the crankshaft. Remember that turning the crank moves the pistons up and down. If you do this with the cams in place one or more of the valves will be held open by the cams and you will suffer piston/valve crash. So if you must turn the crankshaft you must remove the cams.
Why are you replacing the cam chain? Have you measured a length of it according to the manual to see if it is outside the service limits? If so, what about the cam chain guide roller, tensioner roller, idlers, and/or guides? If the chain is shot it seems like a safe bet those also need to be replaced. Ed
Why are you replacing the cam chain? Have you measured a length of it according to the manual to see if it is outside the service limits? If so, what about the cam chain guide roller, tensioner roller, idlers, and/or guides? If the chain is shot it seems like a safe bet those also need to be replaced. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- Cuff
-
Topic Author
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Re: Cam Chian Replacement?
24 Aug 2011 20:33
Thanks for the tip Ed. While in there I was going to look at all the other parts and check for play or runout. I was suspecting a stretch chain due to the noise and the fact that it seems to be the factory chain and wouldn't be a bad idea. Today I took off the tensioner for the third time and made some adjustments to get it out about a mm further. Not much of a fix but should give me some peace of mind for a ride tonight.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
