Cam Chian Replacement?
- Cuff
-
Topic Author
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Cam Chian Replacement?
23 Aug 2011 20:53
Hell all,
Sorry but my search force is weak and can't find any posts about changing the cam chain without opening up the motor. So, my question is this, can you fish a new cam chain using the old one as a guide? I'd rather not open up a good motor if I don't have to. Thanks for all the help and sorry if there is another thread of the same topic, I just can't find it.
btw, the bike is an 81' KZ1000 Police C4. Lots of miles but in good shape with good compression. The adjuster is at its max right now.
Sorry but my search force is weak and can't find any posts about changing the cam chain without opening up the motor. So, my question is this, can you fish a new cam chain using the old one as a guide? I'd rather not open up a good motor if I don't have to. Thanks for all the help and sorry if there is another thread of the same topic, I just can't find it.
btw, the bike is an 81' KZ1000 Police C4. Lots of miles but in good shape with good compression. The adjuster is at its max right now.
Please Log in or Create an account to join the conversation.
- kawman66
-
- Offline
- User
-

Registered
- Posts: 199
- Thanks: 5
Re: Cam Chian Replacement?
23 Aug 2011 20:56
yes you can, but make shure you rivet the chain back to gether with a chain riveter
75 z1b
76 kz900ltd
76 kz900
76 kz900-1500
77 kz1000ltd
my drinking team has a racing problem
76 kz900ltd
76 kz900
76 kz900-1500
77 kz1000ltd
my drinking team has a racing problem
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Cam Chian Replacement?
23 Aug 2011 20:58
Z1 will have the chain, master link, and tool.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- cavanaughracing
-
- Offline
- User
-

Registered
- Posts: 213
- Thanks: 25
Re: Cam Chian Replacement?
23 Aug 2011 21:18 - 23 Aug 2011 21:21
That's a J motor with a Hyvo Chain. That would be a tricky one to do. Z1E lists a chain and master link though. Good luck with it.
Larry C.
cavanaughracing.com
cavanaughracing.com
Last edit: 23 Aug 2011 21:21 by cavanaughracing.
Please Log in or Create an account to join the conversation.
- Cuff
-
Topic Author
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Re: Cam Chian Replacement?
23 Aug 2011 21:22
I've priced out the parts from Z1 including the master rivit link. As for the tool I was hoping that my motion pro chain tool with the small punch and anvil would do the job.
I was thinking about safety wiring the new chain to the old just to feed it through taking care not to move any of the cams or crank. In my head it looks posible but the room for error I think is playing with my little pea brain.
Also it's not a J motor it's the last of the 'C' line wiht kick start. Thanks again.
I was thinking about safety wiring the new chain to the old just to feed it through taking care not to move any of the cams or crank. In my head it looks posible but the room for error I think is playing with my little pea brain.
Please Log in or Create an account to join the conversation.
- cavanaughracing
-
- Offline
- User
-

Registered
- Posts: 213
- Thanks: 25
Re: Cam Chian Replacement?
23 Aug 2011 21:39 - 23 Aug 2011 21:40Cuff wrote: I've priced out the parts from Z1 including the master rivit link. As for the tool I was hoping that my motion pro chain tool with the small punch and anvil would do the job.
I was thinking about safety wiring the new chain to the old just to feed it through taking care not to move any of the cams or crank. In my head it looks posible but the room for error I think is playing with my little pea brain.Also it's not a J motor it's the last of the 'C' line wiht kick start. Thanks again.
Ahhhhh....I see.
Do what you like but I'd pull the top idler, cams and tensioner to replace the chain. It's going to be easier. At the very least, the tensioner will have to come off
Larry C.
cavanaughracing.com
cavanaughracing.com
Last edit: 23 Aug 2011 21:40 by cavanaughracing.
Please Log in or Create an account to join the conversation.
- Cuff
-
Topic Author
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Re: Cam Chian Replacement?
23 Aug 2011 22:09cavanaughracing wrote:Cuff wrote: I've priced out the parts from Z1 including the master rivit link. As for the tool I was hoping that my motion pro chain tool with the small punch and anvil would do the job.
I was thinking about safety wiring the new chain to the old just to feed it through taking care not to move any of the cams or crank. In my head it looks posible but the room for error I think is playing with my little pea brain.Also it's not a J motor it's the last of the 'C' line wiht kick start. Thanks again.
Ahhhhh....I see.
Do what you like but I'd pull the top idler, cams and tensioner to replace the chain. It's going to be easier. At the very least, the tensioner will have to come off
I had planned on taking of the tensioner and the idler but not the cams. Figured best let sleeping dogs lie.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: Cam Chian Replacement?
23 Aug 2011 23:54 - 23 Aug 2011 23:57I know people have done it with the "master link" replacement chains. You split the old chain and wire the end of the new one to the end of the old one and slowly pull it around the crank gear and back up by turning the crankshaft with a wrench.Cuff wrote: Hell all,
Sorry but my search force is weak and can't find any posts about changing the cam chain without opening up the motor. So, my question is this, can you fish a new cam chain using the old one as a guide?
1979 KZ-750 Twin
Last edit: 23 Aug 2011 23:57 by bountyhunter.
Please Log in or Create an account to join the conversation.
- Cuff
-
Topic Author
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Re: Cam Chian Replacement?
24 Aug 2011 00:22bountyhunter wrote:I know people have done it with the "master link" replacement chains. You split the old chain and wire the end of the new one to the end of the old one and slowly pull it around the crank gear and back up by turning the crankshaft with a wrench.Cuff wrote: Hell all,
Sorry but my search force is weak and can't find any posts about changing the cam chain without opening up the motor. So, my question is this, can you fish a new cam chain using the old one as a guide?
Thanks for the sugestion but I'm wondering if you can do this without moving the crank? I just have a fear that my old eyes will lead me astray lining up the cams and the crank.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Cam Chian Replacement?
24 Aug 2011 00:35
I don't know how you would do it without moving the crank. As this is how you pull the new chain around the crank sprocket. Don't worry about re-timing it, it is easy enough. Lots of help on here, some great posts already around covering this. Plenty of color pictures not just the black and white from the manual.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
- jeffasaki
-
- Offline
- User
-

Registered
- Posts: 996
- Thanks: 44
Re: Cam Chian Replacement?
24 Aug 2011 00:42
Ive never done it but if I was to try Id
take off the cam chain tensioner see if its any good
take the cam cover off
Clean everything
Matchmark both ends of the cams,the chain, and idler gear with a paint marker
break the chain (if you use a grinder you get what you deserve)
attach the new chain to the old with a masterlink
(you can also mark timming at the crank)
then Id get some one to give me a bumpstart(they make good whiskey up here)
Then Id hold on to both ends and just let em loose enough to go around the crank
get the new one laced and crimp on a new master(paint mark the new master)
install the idler according to the paint marks
install a new APE manual cam chain tensioner
make sure everything is right
try and fire it up(cam cover off)
should fire
May have to adjust pionts
if youre running points change to DYNA
WILL HAVE TO ADJUST THE NEW CAM CHAIN TENSIONER
dont rev it until you get it snug
should be all good so install cam cover
if not get a degree wheel and lean how to use it
take off the cam chain tensioner see if its any good
take the cam cover off
Clean everything
Matchmark both ends of the cams,the chain, and idler gear with a paint marker
break the chain (if you use a grinder you get what you deserve)
attach the new chain to the old with a masterlink
(you can also mark timming at the crank)
then Id get some one to give me a bumpstart(they make good whiskey up here)
Then Id hold on to both ends and just let em loose enough to go around the crank
get the new one laced and crimp on a new master(paint mark the new master)
install the idler according to the paint marks
install a new APE manual cam chain tensioner
make sure everything is right
try and fire it up(cam cover off)
should fire
May have to adjust pionts
if youre running points change to DYNA
WILL HAVE TO ADJUST THE NEW CAM CHAIN TENSIONER
dont rev it until you get it snug
should be all good so install cam cover
if not get a degree wheel and lean how to use it
78 Z1R
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
Please Log in or Create an account to join the conversation.
- jeffasaki
-
- Offline
- User
-

Registered
- Posts: 996
- Thanks: 44
Re: Cam Chian Replacement?
24 Aug 2011 02:19
forgot to add
tighten the spokes
tighten the spokes
78 Z1R
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
78 KZ1000
76 KH500 gone
71 HS1B 90
81 GS 1100 gone
80 PE400
02 KLR
Ontario Canada
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
