Clutch pushrod leak

  • Ruminus
  • Ruminus's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 25
  • Thanks: 0

Clutch pushrod leak

24 Aug 2011 00:18 - 24 Aug 2011 00:23
#471347
Hey guys;

1982 KZ1000 LTD - I've got all the oil leaks under control but one, and it's driving me nuts. :angry: The clutch push rod is leaking right at the grommet where it feeds into the crankcase/transmission.

I've found the push rod has a few slots on it that look as though they're supposed to have o-rings, but there's none to be seen. :pinch:

The grommet itself was loose, so I reseated that, but I get the feeling I'm missing a nut or something.

Any ideas for fixes or parts I need? :huh:

Thanks!
Last edit: 24 Aug 2011 00:23 by Ruminus.

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Motor Head's Avatar
  • Offline
  • User
  • User
    Registered
  • FIX UP YOUR BIKE RIGHT AND CHEAP
  • Posts: 5137
  • Thanks: 393

Re: Clutch pushrod leak

24 Aug 2011 00:28 - 24 Aug 2011 00:31
#471355
92049 92049-004 OIL SEAL SB12205
I replaced all the oil seals on the cover, all easy to get. Z1 will have them.


1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Last edit: 24 Aug 2011 00:31 by Motor Head.
The following user(s) said Thank You: Ruminus

Please Log in or Create an account to join the conversation.

  • Ruminus
  • Ruminus's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 25
  • Thanks: 0

Re: Clutch pushrod leak

16 Nov 2011 11:02
#488757
Oh, and I managed to find the oil seal locally for $5, so that was a nice score! :silly:

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • User
    Registered
  • Keep twisting it
  • Posts: 5297
  • Thanks: 109

Re: Clutch pushrod leak

16 Nov 2011 19:36
#488818
if the rod has a groove worn in it from the seal, try turning the rod around and inserting the oposite end.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: Clutch pushrod leak

17 Nov 2011 00:25
#488857
If needed, Z1 Enterprises offers clutch push rods.
At the Z1E site, search clutch push rod.

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

  • Nelson
  • Nelson's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 665
  • Thanks: 16

Re: Clutch pushrod leak

20 Nov 2011 02:20
#489298
mark1122 wrote: if the rod has a groove worn in it from the seal, try turning the rod around and inserting the oposite end.

Ditto! just did that myself
Restoring and customizing a KZ1000. Click here to read about it.
Plated KTM, DR650, KZ1000, Former MC mechanic (eons ago). 40 yrs. of dirt and street.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum