exhaust fitment not the same?
- Goalieguy35
-
Topic Author
- Offline
- User
-

Registered
- JJ
- Posts: 124
- Thanks: 2
exhaust fitment not the same?
24 Aug 2011 00:36
Hi, i did a motor swap on a 1980 z1000 i put a 76 kz900 motor in and the stock exhausts off the z1000 i put on the 76 but it has a huge exhaust leak? are the exhaust collor on the z1 shorter? because the pipes are loose and rattle when running. Thats gotta be the only thing different between the two. I just want to confirm.
Thanks
Thanks
1982 Kz750 w/ inverted gsxr front end. (sold) but forever missed
1980 z1000 cafe project w/76kz900 motor in it
80 kz 1000
81 kz1000
79 Yamaha xs 650
1979 kz 1000 LTD
1977 kz 1000 A
1977 kz 650 C
1978 kz 650
1980 z1000 cafe project w/76kz900 motor in it
80 kz 1000
81 kz1000
79 Yamaha xs 650
1979 kz 1000 LTD
1977 kz 1000 A
1977 kz 650 C
1978 kz 650
Please Log in or Create an account to join the conversation.
- Chaotic Reason
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 15
Re: exhaust fitment not the same?
24 Aug 2011 01:49
Did you use the same collars? New exhaust gaskets? Did you use a bit of high temp grease to hold the new gaskets in place when you were putting on the exhaust? Line the collars up correctly in the flanges? Pics are good to help diagnose.
There is a thread: www.kzrider.com/forum/2-engine/471193-kerker-pipes where they are going through much the same scenario. Might give you a few things to try out to see if you can get it sussed out. AS FAR AS I KNOW, the heads should match up. I of course could be wrong, but it'll be worth giving it a try.
There is a thread: www.kzrider.com/forum/2-engine/471193-kerker-pipes where they are going through much the same scenario. Might give you a few things to try out to see if you can get it sussed out. AS FAR AS I KNOW, the heads should match up. I of course could be wrong, but it'll be worth giving it a try.
Michael
1980 KZ1000 shaft drive
1980 KZ1000 shaft drive
Please Log in or Create an account to join the conversation.
- Goalieguy35
-
Topic Author
- Offline
- User
-

Registered
- JJ
- Posts: 124
- Thanks: 2
Re: exhaust fitment not the same?
24 Aug 2011 11:57
You know what, know that you mentioned exhaust gaskets i dont believe the 900 had them in the heads when i put the pipes in. I failed to look for it. i believe thats why there loose. They guy i got the motor from said it had head work done to it. so maybe they didnt replace the old gaskets. i think thats why they vibrate.
1982 Kz750 w/ inverted gsxr front end. (sold) but forever missed
1980 z1000 cafe project w/76kz900 motor in it
80 kz 1000
81 kz1000
79 Yamaha xs 650
1979 kz 1000 LTD
1977 kz 1000 A
1977 kz 650 C
1978 kz 650
1980 z1000 cafe project w/76kz900 motor in it
80 kz 1000
81 kz1000
79 Yamaha xs 650
1979 kz 1000 LTD
1977 kz 1000 A
1977 kz 650 C
1978 kz 650
Please Log in or Create an account to join the conversation.
- Chaotic Reason
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 15
Re: exhaust fitment not the same?
24 Aug 2011 12:29
Check out Z1Enterprises, they can help you get what you need.
Michael
1980 KZ1000 shaft drive
1980 KZ1000 shaft drive
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
