KZ1000 Newbie - Please help

  • Spudrider2511
  • Spudrider2511's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 5
  • Thanks: 0

KZ1000 Newbie - Please help

29 Aug 2011 12:57
#472526
I know that I'm probably obligated to do an indroduction at another forum area, but I really need help. I am totally new to this type of bike.

What I have is a basket case '79 kz1000 that I have no history on. The bottom end is uncracked, but the head and jugs are disassembled. I have acquired 2 different shop manuals, and have familiarized myself a little.

My question(#1)is really; how far should I go on the rebuild due to money constraints. My plan is to separate the bottom cases and clean everything. Is there anything I should absolutely replace in the lower end? I would like to just re-assemeble that part and spend what little money I do have on everything cam chain related, rings and pistons, and head re-build.

Question (#2) is: where should I buy these replacement parts(top end)? I know of Z1 but really no other suppliers. Any help would be greatly appreciated. Also, is there a master list of parts needed, or at least a re-built kit availible?

I realize the info I'm asking for is complicated and extensive. If you need more info from me, just ask. I appreciate any help you can give. I know your time is valuable.

Thanks,
Jeff

Please Log in or Create an account to join the conversation.

  • T_Dub
  • T_Dub's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 1441
  • Thanks: 26

Re: KZ1000 Newbie - Please help

29 Aug 2011 13:51
#472533
1. You might think about replacing the transmission bearings while you're into the bottom end. Check everything for wear, plasti-gauge the crank bearings. Just make sure everything is within tolerance. If it is, it'll all last you quite a while longer. You'll kick yourself later if you don't check this stuff and then something goes.

2. I would say for head/timing chain parts go to Z1E. The parts diagrams on kawasaki.com will give you a list of whats there. Replace it all if you don't plan on taking it apart again for a while. As for pistons/rings you might want to think on a wiseco kit. Their 1015cc kit is a drop in for a kz1000, or you could get a 1075 kit. It's hard to find stock oversize pistons and rings. but big pistons opens up a whole new bucket of fish. You start thinking about carbs, head work, pipes etc. Someone on here might have a stock set of pistons that could work for you.


These are some pretty generic questions, so more info isn't that necessary. It basically comes down to what you want to spend on that engine. If there's nothing wrong in your bottom end and you go with bigger pistons, replace all your timing chain stuff, and the necessary fueling changes etc, you're talking somewhere between $1500-2000. If you can find a set of cheap stock pistons off someone and just do a hone and head refresh you're still talking about up to $1000.

Others will have more insight, but I'll start the ball rolling there.
1977 KZ650B1
-810cc
-Cavanaugh Racing Head
-Mikuni RS34's
-GPR Muffler

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: KZ1000 Newbie - Please help

29 Aug 2011 14:38
#472558
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum