brooken studs

  • judsmall
  • judsmall's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

brooken studs

29 Aug 2011 21:18
#472683
just broke two studs off that hold on the exhaust .. How do you get the broken studs out

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: brooken studs

29 Aug 2011 21:21
#472684
is anything left sticking out? ;)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • z1kzonly's Avatar
  • Offline
  • User
  • User
    Registered
  • Sustaining Member
  • Posts: 2815
  • Thanks: 527

Re: brooken studs

29 Aug 2011 21:47
#472690
Ouch! New guy, welcome! What size? 6mm - 8mm?
4 cly.? Z1-KZ?

If leaving head on bike you better be pretty good! And sure of your self!
You need to buy a left hand drill bit! Yes an opposite bit and the matching easyout.
Grind the stud flush with the aluminum head surface. Center punch a perfect start and drill in straight. You have to run your drill motor in reverse. If you get lucky and drill the stud well and deep in. Heat the head with a propane torch or real, oxy/cetalene before you try the easy out.

Here is a lucky attempt by me on a 6mm Z1 stud. Notice the blue heat on the easyout!
drill went right down the middle, see the broken stud piece?
I also had the head off and in a jig on a drill press.

Good Luck!!!
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: brooken studs

29 Aug 2011 23:48
#472719
For future reference; soak those exhaust flange nuts with some Kroil for a day or 2 before removing and they won't break. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • garyprather
  • garyprather's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 133
  • Thanks: 0

Re: brooken studs

30 Aug 2011 15:10
#472884
Depending how much stud is sticking out I have tack welded nuts onto them to turn them out. The heat also helps on breaking them loose. But I would try easy outing it first. Good luck.

Please Log in or Create an account to join the conversation.

  • judsmall
  • judsmall's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 2
  • Thanks: 0

Re: brooken studs

30 Aug 2011 18:09
#472980
yes only the thred broke off

Please Log in or Create an account to join the conversation.

  • garyprather
  • garyprather's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 133
  • Thanks: 0

Re: brooken studs

31 Aug 2011 00:34
#473089
You must use a easy out then. If you cannot get it out like that I would try to drill it out. start with a small drill and work your way up. Avoid anything close to the minor dia. of the threads in there. You may be able to use the exhaust as a drill guide if its possible. Steady hands work best.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum