cam chain tensioner
- hal0tw0
-
Topic Author
- Offline
- User
-

Registered
- Posts: 240
- Thanks: 4
cam chain tensioner
31 Aug 2011 11:49
Hello folks,
I was looking to check my cam chains tension and I noticed there is no bolt/lock nut there. I see a place where it looks like it was sheared off and is now flush with the outside. Is is ok to take off the tensioner as is or will I wreck something inside? I realize I need a new one but didnt want to dive in without knowing first. I only expect some kind of spring back reaction but I dont want to damage any engine internals. Should I bring it to TDC before doing so?
Thanks
Kelly
I was looking to check my cam chains tension and I noticed there is no bolt/lock nut there. I see a place where it looks like it was sheared off and is now flush with the outside. Is is ok to take off the tensioner as is or will I wreck something inside? I realize I need a new one but didnt want to dive in without knowing first. I only expect some kind of spring back reaction but I dont want to damage any engine internals. Should I bring it to TDC before doing so?
Thanks
Kelly
1976 KA900. VM28 pumper carbs, K&N pod fiters, RC performace 4/1 exhaust, Dyna ignition, Accel coils and wires, Ohlins rear shocks.....more to come
Please Log in or Create an account to join the conversation.
- cobura
-
- Offline
- User
-

Registered
- forever 2 wheels
- Posts: 260
- Thanks: 3
Re: cam chain tensioner
31 Aug 2011 12:09
Its okay to remove the whole assembly, it wont damage anything, but u obviosly shouldnt start the engine until you have re-installed the tensioner. For some reason that bolt has a tendency to sheer off, happened on my bike too.
1979 KZ650B3
Please Log in or Create an account to join the conversation.
- hal0tw0
-
Topic Author
- Offline
- User
-

Registered
- Posts: 240
- Thanks: 4
Re: cam chain tensioner
31 Aug 2011 12:30
Thank you very much!
1976 KA900. VM28 pumper carbs, K&N pod fiters, RC performace 4/1 exhaust, Dyna ignition, Accel coils and wires, Ohlins rear shocks.....more to come
Please Log in or Create an account to join the conversation.
- cobura
-
- Offline
- User
-

Registered
- forever 2 wheels
- Posts: 260
- Thanks: 3
Re: cam chain tensioner
31 Aug 2011 13:19
Be sure to consult your clymers manual on how to set your cam chain tension.
1979 KZ650B3
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: cam chain tensioner
31 Aug 2011 13:37
Its ok to take it out just dont turn the motor over in any way shape or form.
have the new one ready to go in.
have the new one ready to go in.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- hal0tw0
-
Topic Author
- Offline
- User
-

Registered
- Posts: 240
- Thanks: 4
Re: cam chain tensioner
31 Aug 2011 13:51
Yeah, I have a spare one I can pick up, I wasnt going to do this until I had a plan B
1976 KA900. VM28 pumper carbs, K&N pod fiters, RC performace 4/1 exhaust, Dyna ignition, Accel coils and wires, Ohlins rear shocks.....more to come
Please Log in or Create an account to join the conversation.
- MFolks
-
- Offline
- User
-

Registered
- Posts: 6650
- Thanks: 541
Re: cam chain tensioner
31 Aug 2011 14:37
Many riders are replacing the automatic tensioner with the manual type:
www.kriegercamchaintensioners.com/
I believe APE makes a similar one too.
www.kriegercamchaintensioners.com/
I believe APE makes a similar one too.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)
Please Log in or Create an account to join the conversation.
- cobura
-
- Offline
- User
-

Registered
- forever 2 wheels
- Posts: 260
- Thanks: 3
Re: cam chain tensioner
31 Aug 2011 15:23
i had a "sanctuary" brand manual-type tensioner on my previous KZ650, but I had no idea how to adjust it properly. What is the procedure for adjusting these? How do you know when its tight enough?
1979 KZ650B3
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: cam chain tensioner
31 Aug 2011 16:49
just put a stock tensioner on there and ride happy
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
