I think my syncronizer might be bad.

  • djturnz
  • djturnz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 340
  • Thanks: 5

I think my syncronizer might be bad.

31 Aug 2011 14:50
#473280
I'll admit, I would use the clutch to up-shift almost 100% of the time. Now, lately, I have been trying to make myself shift without the clutch more. Well now the shift from 2-3 sometimes won't happen without the clutch, and if it does, it is noticeably different than 3-4 and 4-5. It sort of feels like it jumps into gear. The 3-4 and 4-5 is quite seamless. So did I pork my syncronizer or what?
1982 KZ750 (4) LTD
The following user(s) said Thank You: TomW

Please Log in or Create an account to join the conversation.

  • MFolks
  • MFolks's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 6650
  • Thanks: 541

Re: I think my syncronizer might be bad.

31 Aug 2011 15:05
#473282
What type/grade of engine oil being used? The car oils are containing friction modifiers not compatable with the starter and wet plate clutches of motorcycles. Oil is oil is really not anymore.
1982 GPZ1100 B2
General Dynamics/Convair 1983-1993
GLCM BGM-109 Tomahawk, AGM-129A Advanced Cruise Missile (ACM)

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: I think my syncronizer might be bad.

31 Aug 2011 16:52
#473306
are you backing off the throttle when you shift?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • User
    Registered
  • Posts: 15334
  • Thanks: 2832

Re: I think my syncronizer might be bad.

31 Aug 2011 18:43
#473334
djturnz wrote: I'll admit, I would use the clutch to up-shift almost 100% of the time. Now, lately, I have been trying to make myself shift without the clutch more. Well now the shift from 2-3 sometimes won't happen without the clutch, and if it does, it is noticeably different than 3-4 and 4-5. It sort of feels like it jumps into gear. The 3-4 and 4-5 is quite seamless. So did I pork my syncronizer or what?

What do you believe to be the advantage of not disengaging the clutch when shifting? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • djturnz
  • djturnz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • Posts: 340
  • Thanks: 5

Re: I think my syncronizer might be bad.

31 Aug 2011 19:16
#473339
Rosella oil.
yes, throttle off.
its not so much that there is an advantage unless trying accelerate quickly. But I've read that its possible and acceptable and doesn't hurt anything, so I figured I could do it.
1982 KZ750 (4) LTD

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: I think my syncronizer might be bad.

01 Sep 2011 00:26
#473395
650ed wrote:
djturnz wrote: I'll admit, I would use the clutch to up-shift almost 100% of the time. Now, lately, I have been trying to make myself shift without the clutch more. Well now the shift from 2-3 sometimes won't happen without the clutch, and if it does, it is noticeably different than 3-4 and 4-5. It sort of feels like it jumps into gear. The 3-4 and 4-5 is quite seamless. So did I pork my syncronizer or what?

What do you believe to be the advantage of not disengaging the clutch when shifting? Ed
easier,less wear/tear on clutch and cable if you do it right B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: I think my syncronizer might be bad.

01 Sep 2011 00:38 - 01 Sep 2011 00:38
#473399
wireman wrote:
650ed wrote:
djturnz wrote: I'll admit, I would use the clutch to up-shift almost 100% of the time. Now, lately, I have been trying to make myself shift without the clutch more. Well now the shift from 2-3 sometimes won't happen without the clutch, and if it does, it is noticeably different than 3-4 and 4-5. It sort of feels like it jumps into gear. The 3-4 and 4-5 is quite seamless. So did I pork my syncronizer or what?

What do you believe to be the advantage of not disengaging the clutch when shifting? Ed
easier,less wear/tear on clutch and cable if you do it right B)

Yes. But what if it's not done right every time? I'd rather replace multiple clutch cables and clutches than a trans. However, I've gone hundreds of miles to get home on a broken clutch cable. So sometimes you just have to, so it's a good skill to have.

I didn't think there was any type of synchro on KZ transmissions. The gears just press together and the dogs engage, and bam... you've shifted.

What I thought happens (from too many bad shifts) is the dogs start to lose their shape which makes it easier for the trans to pop out of gear by itself. It also makes it so you have to really make sure you shift fully or the shift won't happen... no lazy shifting.

Somewhere there is a really good post showing how and why racers use undercut gears. It's not the gears that get cut, it's the dogs on the gears that get under-cut so they stick together.
Last edit: 01 Sep 2011 00:38 by loudhvx.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: I think my syncronizer might be bad.

01 Sep 2011 00:48
#473401
The dogs normally get banged up from people trying to slam them into gear,ive missed way more gears using a clutch then i ever have without a clutch personally.
but its like anything else it takes practice. :laugh:
Japanese car transmissions are easier to shift without a clutch than american versions,ive also driven many c-60/c-70 trucks without a clutch when they were unloaded. (little tough to do with a load on them! :woohoo: )
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • loudhvx
  • loudhvx's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 10863
  • Thanks: 1622

Re: I think my syncronizer might be bad.

01 Sep 2011 01:08 - 01 Sep 2011 01:08
#473418
wireman wrote: The dogs normally get banged up from people trying to slam them into gear,ive missed way more gears using a clutch then i ever have without a clutch personally.
but its like anything else it takes practice. :laugh:
Japanese car transmissions are easier to shift without a clutch than american versions,ive also driven many c-60/c-70 trucks without a clutch when they were unloaded. (little tough to do with a load on them! :woohoo: )

Oh, please, don't remind me of Japanese cars. My Nissan shifted so buttery smooth... and now it's stolen. :(
Last edit: 01 Sep 2011 01:08 by loudhvx.

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: I think my syncronizer might be bad.

01 Sep 2011 01:16 - 01 Sep 2011 01:17
#473419
djturnz wrote: Rosella oil.
yes, throttle off.
its not so much that there is an advantage unless trying accelerate quickly. But I've read that its possible and acceptable and doesn't hurt anything, so I figured I could do it.

Imo faster acceleration is achieved by "speed shifting" (i.e., maintaining WOT while clutching and shifting) rather than closing throttle to shift without clutching followed by WOT.
Allowing high rpm to drop and then regain hampers acceleration, regardless of whether the clutch is used during the gear shift.

Am thinking the "air shifters" for drag racing applications effect gear changes without clutch disengagement by simultaneously killing the ignition for a fraction of a second.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 01 Sep 2011 01:17 by Patton.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: I think my syncronizer might be bad.

01 Sep 2011 01:28 - 01 Sep 2011 01:31
#473423
just remember when you keep the throttle pinned and pull the clutch in at same time shifting youre freeing up the motor to run wild at whatever speed it wants,combine that with a stock shifter that tends to be about 1" longer than it needs to be imo and all kinds of terrible metal to metal interaction can take place inside of a motor! :sick: :woohoo:
not to mention all your friends laughing at you when it hangs up between gears leaving you with that homer simpson look on your face! :woohoo:
now if you were really sneaky and wanted to build a real sleeper of a streetracer you could wire your horn button up as either a way to kill your ignition while you shift,or you could wire it into a relay/solinoid to operate an electric shifter. :whistle: :evil:
but for the guy whos just out for a sunday cruise i personally see very little danger in shifting without a clutch :)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Last edit: 01 Sep 2011 01:31 by wireman.

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: I think my syncronizer might be bad.

01 Sep 2011 03:11
#473438
loudhvx wrote:
wireman wrote: The dogs normally get banged up from people trying to slam them into gear,ive missed way more gears using a clutch then i ever have without a clutch personally.
but its like anything else it takes practice. :laugh:
Japanese car transmissions are easier to shift without a clutch than american versions,ive also driven many c-60/c-70 trucks without a clutch when they were unloaded. (little tough to do with a load on them! :woohoo: )

Oh, please, don't remind me of Japanese cars. My Nissan shifted so buttery smooth... and now it's stolen. :(
that sucks! :(
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum