Need engine advice
- ravenz07
-
Topic Author
- Offline
- User
-

Registered
- Posts: 108
- Thanks: 2
Need engine advice
02 Sep 2011 12:33
So I feel my KZP is beginning to take a quiet death. I have done everything to make it run as nice as possible but when it comes right down to it, the bike will never be the way it should be with well over 80k miles. I am too afraid to check the compression but I don't feel like it is necessary when the thing burns all the oil it wants and all of my valve clearances are now down to low 200s.
I have seen this on craigslist for awhile. Is it worth getting? What else might I need?
phoenix.craigslist.org/evl/mcy/2531331299.html
(94 KZ1000 Police)
I have seen this on craigslist for awhile. Is it worth getting? What else might I need?
phoenix.craigslist.org/evl/mcy/2531331299.html
(94 KZ1000 Police)
1994 Kawasaki KZ1000 Police
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: Need engine advice
02 Sep 2011 13:44
No guarantee that those pistons don’t all need new rings, that’s at least $125 to $150. Its going to raise the compression and you will need to run premium gas and its going to run a lot hotter.
Saying he could get more on ebay I don’t think is true. $350 would be the top ebay price on those if even. If he sold for $250 that would be a better deal.
I have always liked swapping out the 1100 block and pistons on the 1000’s. You can find them on ebay and drop it right into your motor. Buy a new set of rings for those and you’ll have an 1100 that doesn’t need premium or rejetting.
Saying he could get more on ebay I don’t think is true. $350 would be the top ebay price on those if even. If he sold for $250 that would be a better deal.
I have always liked swapping out the 1100 block and pistons on the 1000’s. You can find them on ebay and drop it right into your motor. Buy a new set of rings for those and you’ll have an 1100 that doesn’t need premium or rejetting.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
-

Registered
- Attack life, it's only trying to kill you.
- Posts: 3673
- Thanks: 83
Re: Need engine advice
02 Sep 2011 13:48
That would surely address your lack of compression. You will still need to do something about the valves. With that said, I would want a real good explanation on the two missing rings. Seems fishy to me. Get a good look at the cylinder in question and the piston. Maybe try placing the pistons in the jugs to make sure they aren't loose. He could have used a hone to cover up some gouged cylinder walls. The crosshatch in the one pictured looks very fresh. If he honed the heck out of a cylinder to pretty it up, the piston will be loose in the bore. It's always hard to tell from a craigslist picture. They are so compressed that the quality is dismal. It would be a pretty good deal as long as everything is legit.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- Mcdroid
-
- Offline
- Sustaining Member
-

Registered
- Gone Kwackers
- Posts: 6909
- Thanks: 530
Re: Need engine advice
02 Sep 2011 14:35
I'm thinking that cylinder/hone looks a bit scarey. A hone (not to be confused with a bore) should essentially knock off the glaze...the photo appears like more than just the glaze was removed...
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- ravenz07
-
Topic Author
- Offline
- User
-

Registered
- Posts: 108
- Thanks: 2
Re: Need engine advice
02 Sep 2011 14:35
He did say he did a fresh honing on all the cylinders. It mainly concerns me because I dont know what to really look for in this sort of thing. I have gotten my hands into a motor but never to this extent. The valves I do plan on doing once the time comes around.
I know Weisco sells their 1105 kit for 600 without the head gasket. Not to mention the cost of boring from a machine shop. This particular guy charges 80 dollars per cylinder. I might be going to take a look at it tomorrow, and since it is out of town from where I live, I kind of need to make a decision.
I know Weisco sells their 1105 kit for 600 without the head gasket. Not to mention the cost of boring from a machine shop. This particular guy charges 80 dollars per cylinder. I might be going to take a look at it tomorrow, and since it is out of town from where I live, I kind of need to make a decision.
1994 Kawasaki KZ1000 Police
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: Need engine advice
02 Sep 2011 15:25
$600 is the new price not the used. This stuff does not sell used nearly what it does new. There are shops that will bore and hone for $150 all 4.
Ask him if he has any gauges to measure the pitons/bore. If he cannot provide these measurements then I would ask him to take less then he is asking, like $250.
I just looked on ebay at what some used kits and blocks sold for and I saw $188 and $310 so like I said he is asking higher then ebay prices.
Ask him if he has any gauges to measure the pitons/bore. If he cannot provide these measurements then I would ask him to take less then he is asking, like $250.
I just looked on ebay at what some used kits and blocks sold for and I saw $188 and $310 so like I said he is asking higher then ebay prices.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- ravenz07
-
Topic Author
- Offline
- User
-

Registered
- Posts: 108
- Thanks: 2
Re: Need engine advice
02 Sep 2011 15:35
I am beginning to wonder if it would be better to find a used motor with good compression
1994 Kawasaki KZ1000 Police
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Need engine advice
02 Sep 2011 16:09
If you don't know how to measure the cylinders and pistons. Stay away. This is good advice.
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- ravenz07
-
Topic Author
- Offline
- User
-

Registered
- Posts: 108
- Thanks: 2
Re: Need engine advice
02 Sep 2011 16:19
Certainly at this time yes, but everyone has to start somewhere right? Anyone have some good material on this?
1994 Kawasaki KZ1000 Police
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Need engine advice
02 Sep 2011 16:39 - 02 Sep 2011 16:42
These look nice but who knows?
Get your manual out and learn the dimensions and go measure.
There should be a lot of data on measuring cylinders and pistons. Roy
cgi.ebay.com/ebaymotors/KZ-1000-J-model-...&hash=item27bdd9feea
Get your manual out and learn the dimensions and go measure.
There should be a lot of data on measuring cylinders and pistons. Roy
cgi.ebay.com/ebaymotors/KZ-1000-J-model-...&hash=item27bdd9feea
1979 LTD Street Fighter.1977 KZ1000
Last edit: 02 Sep 2011 16:42 by roy-b-boy-b.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Please Log in or Create an account to join the conversation.
- ravenz07
-
Topic Author
- Offline
- User
-

Registered
- Posts: 108
- Thanks: 2
Re: Need engine advice
02 Sep 2011 17:39
1994 Kawasaki KZ1000 Police
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
1980 Kawasaki KZ750 LTD
1981 Yamaha XJ650H Maxim
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
