valves and springs
- twilhelm
-
Topic Author
- User
-

Public
- Thanks: 0
valves and springs
03 Sep 2011 21:36
I have a 77 750b that's been giving me problems for a few years and I had had little success with making it run better. I finally decided to pull the head off because I suspected something was wrong with one of the valves and I was right one intake valve doesn't seat completely. I figured id put new valves and springs in while had it apart but can't find anyone who has them. Any suggestions
Please Log in or Create an account to join the conversation.
- 650ed
-
- Offline
- User
-

Registered
- Posts: 15334
- Thanks: 2832
Re: valves and springs
03 Sep 2011 21:55
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: valves and springs
04 Sep 2011 03:54
I bought a new set of valves off ebay pretty cheap but my bike had 80k miles on it. Unless yours is high mileage, you can probably turn the valves and lap the seats and you are good. Be sure to replace the valve guide seals.
1979 KZ-750 Twin
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: valves and springs
04 Sep 2011 03:56I have a '79 750 twin owned since new. Both times it started running bad it had low compression because one valve was not seating. Both times it was becasue a valve seal had failed and oil leaked down through the valve seat and built up a burned on layer of gunk over time.twilhelm wrote: I finally decided to pull the head off because I suspected something was wrong with one of the valves and I was right one intake valve doesn't seat completely.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
