Need Exhaust and Carb help!!!!!!!!!!!
- kz440550
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Need Exhaust and Carb help!!!!!!!!!!!
04 Sep 2011 21:58Attachment KZ550bobber1.jpg not found
Ok I am starting this project bike I just bought for 100 bucks Kz 550 in a 440 frame, I wanted to cut the exhaust off right under the foot pegs. Bike isnt running good has good top end and idle is good but running down the roas at 5000 rpm bike just isn't right look at the plugs and they are white running way lean. I have 120 mains but thats it. any suggestions can I run the bike with staight headers or do i need more back preasure.
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Need Exhaust and Carb help!!!!!!!!!!!
04 Sep 2011 22:34
If the bike is lean now ,cutting off the pipes will hurt the mixture more. You need bigger jets it seems.
Someone that knows these engines will respond and give a better answer than I can. Roy
Someone that knows these engines will respond and give a better answer than I can. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- kz440550
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Re: Need Exhaust and Carb help!!!!!!!!!!!
04 Sep 2011 22:40
no it ran great and I cut them off and now its lean and runs rough mid range
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Need Exhaust and Carb help!!!!!!!!!!!
04 Sep 2011 23:00
Bigger jets or a good welder. Roy
1979 LTD Street Fighter.1977 KZ1000
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Need Exhaust and Carb help!!!!!!!!!!!
04 Sep 2011 23:01:woohoo:roy-b-boy-b wrote: Bigger jets or a good welder. Roy
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- Nebr_Rex
-
- Offline
- User
-

Registered
- Posts: 1889
- Thanks: 295
Re: Need Exhaust and Carb help!!!!!!!!!!!
05 Sep 2011 00:24wireman wrote::woohoo:roy-b-boy-b wrote: Bigger jets or a good welder. Roy
:woohoo: :woohoo:
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/index.php?threads/dr-je...air-of-kz400s.39120/
.
Please Log in or Create an account to join the conversation.
- kz440550
-
Topic Author
- Offline
- User
-

Registered
- Posts: 3
- Thanks: 0
Re: Need Exhaust and Carb help!!!!!!!!!!!
05 Sep 2011 13:00
I seen some talk that you didnt need to go any larger than 120 mains but you needed bigger idle jets and adjustable needles with them set on the 3rd or 4th clip has anyone done this?
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
-
- Offline
- User
-

Registered
- Posts: 3245
- Thanks: 103
Re: Need Exhaust and Carb help!!!!!!!!!!!
05 Sep 2011 15:02
I don't know these engines or carbs but would go higher on the small jets and raise the needles. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
