VALVE BENT
- rudedog79
-
Topic Author
- Offline
- User
-

Registered
- Posts: 1
- Thanks: 0
VALVE BENT
04 Sep 2011 22:46
I HAVE A 2003 GALANT AND THE TIMEING BELT BROKE. WELL I PUT A NEW BELT ON AND I HAVE NO POWER NOW. I THOUGHT I HAD SOME BENT VALVS SO I TOOK THE HEAD OFF. MY QUESTION IS CAN THE VALVES BE BENT BUT LOOK STRAIGHT AND SIT FINE TO THE NAKED EYE?
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: VALVE BENT
04 Sep 2011 22:59
Well i guess 4cyls is 4 cyls! :woohoo:
Lay the head with the exhuast ports flat on the bench and fill your intake ports with solvent and see if leaks out around valves,if you dont see it leaking blow compressed air around face of valves where they sit on valve seat and look for bubbles in ports.
flip head over and repeat on other valves
Lay the head with the exhuast ports flat on the bench and fill your intake ports with solvent and see if leaks out around valves,if you dont see it leaking blow compressed air around face of valves where they sit on valve seat and look for bubbles in ports.
flip head over and repeat on other valves
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- nads.com
-
- Offline
- User
-

Registered
- Posts: 993
- Thanks: 20
Re: VALVE BENT
05 Sep 2011 02:01 - 05 Sep 2011 02:02
They can look perfect and will as you've seen.
If the timing belt was installed incorrectly
you could have bent valves
Clean the valve and seat with a lint free rag VERY good first
or your gonna have leaks when you test it and not have a clue
as to wether a valve is bent.
When you are blowing air into the port
hold the valve down with your finger or thumb
If you lift it off it's seat your test will lead you to believe
every valve is bent.
if the motor bent a valve or two it would shake like jello at idle
If the timing is retarded ( off the mark) it may not shake but
still no power.
Next time blow air into each cylinder and listen at the intake
manifold and exhaust pipe for air leaking.
before you take it apart.
If the timing belt was installed incorrectly
you could have bent valves
Clean the valve and seat with a lint free rag VERY good first
or your gonna have leaks when you test it and not have a clue
as to wether a valve is bent.
When you are blowing air into the port
hold the valve down with your finger or thumb
If you lift it off it's seat your test will lead you to believe
every valve is bent.
if the motor bent a valve or two it would shake like jello at idle
If the timing is retarded ( off the mark) it may not shake but
still no power.
Next time blow air into each cylinder and listen at the intake
manifold and exhaust pipe for air leaking.
before you take it apart.
Last edit: 05 Sep 2011 02:02 by nads.com.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
