Build Your Own Baffle...
- RedlineJunkie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Build Your Own Baffle...
04 Sep 2011 23:39
....out of a glass pack muffler, lol! The open megaphone was just too brutal and I knew I was going to get a ticket so...... I got this idea in my head a while back. I let it rattle around in my head during the day while I worked (I'm on call and drove 290 miles today and completed 3 jobs). Just by chance, one job was at an auto parts store so I picked up a Magnaflow glass pack to dissect.
Kerker competition baffles (I don't want it to be too quiet) run about 150 bucks not including shipping and/or tax. I just can't see doing that if I could build my own so here goes:
pic1. This is what I started with. I had to stare it for a while to figure out what shape I wanted.
pic2. Time to whip out the cut-off wheel and get to work.
pic3. Split the packing off with a knife. They say on the box it's not fiberglass but it sure looks like fiberglass to me..
pic4. So this is what I'm left with. Perfect!
pic5. On one end of the baffle I put a bead all the way around to both repair the crappy baffle to pipe attachment and also to create a "ball" that will seal to the inside of the megaphone. Just like a stock ball and socket exhaust. Kerker did NOT do that.
Kerker competition baffles (I don't want it to be too quiet) run about 150 bucks not including shipping and/or tax. I just can't see doing that if I could build my own so here goes:
pic1. This is what I started with. I had to stare it for a while to figure out what shape I wanted.
pic2. Time to whip out the cut-off wheel and get to work.
pic3. Split the packing off with a knife. They say on the box it's not fiberglass but it sure looks like fiberglass to me..
pic4. So this is what I'm left with. Perfect!
pic5. On one end of the baffle I put a bead all the way around to both repair the crappy baffle to pipe attachment and also to create a "ball" that will seal to the inside of the megaphone. Just like a stock ball and socket exhaust. Kerker did NOT do that.
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Build Your Own Baffle...
04 Sep 2011 23:46
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- RedlineJunkie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Re: Build Your Own Baffle...
04 Sep 2011 23:46
pic1. Ok, now I got to shorten the baffle so it doesn't stick out 2 feet from the megaphone. Ready to tack weld here after taking a few measurements and cutting to fit.
pic2. Welded up.
pic3. Had to do a little grinding but it fits snug as a bug in a rug. I did re-install the packing.
pic4. Cut out a tab that a bolt will thread into via a hole in the backside of the megaphone. This will prevent "Lost Baffle Syndrome" and subsequent windshield insurance claims.
The bike sounds freaking great and it took the edge off the open baffle sound. Total cost? $40, not including electricty for the mig welder and cut off tool.
I hope this helps someone and good luck.
pic2. Welded up.
pic3. Had to do a little grinding but it fits snug as a bug in a rug. I did re-install the packing.
pic4. Cut out a tab that a bolt will thread into via a hole in the backside of the megaphone. This will prevent "Lost Baffle Syndrome" and subsequent windshield insurance claims.
The bike sounds freaking great and it took the edge off the open baffle sound. Total cost? $40, not including electricty for the mig welder and cut off tool.
I hope this helps someone and good luck.
Please Log in or Create an account to join the conversation.
- Chaotic Reason
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 15
Re: Build Your Own Baffle...
04 Sep 2011 23:50
Check out Sears. Who woulda thunk it???
auto.sears.com/automotiveparts/2006266p.htm?filterid=c14658j15
auto.sears.com/automotiveparts/2006266p.htm?filterid=c14658j15
Michael
1980 KZ1000 shaft drive
1980 KZ1000 shaft drive
Please Log in or Create an account to join the conversation.
- RedlineJunkie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Re: Build Your Own Baffle...
04 Sep 2011 23:59 - 05 Sep 2011 00:01Chaotic Reason wrote: Check out Sears. Who woulda thunk it???
auto.sears.com/automotiveparts/2006266p.htm?filterid=c14658j15
:lol: No way would would someone get that to seal properly in a Kerker megaphone. This one sounds almost exactly like the Kerker competition baffle, just a little deeper and I didn't have to jam anything into the collector. It's also stainless steel so it will last pretty much forever.
That sears thing might quiet down a Harley with straight pipes though....
Last edit: 05 Sep 2011 00:01 by RedlineJunkie.
Please Log in or Create an account to join the conversation.
- hal0tw0
-
- Offline
- User
-

Registered
- Posts: 240
- Thanks: 4
Re: Build Your Own Baffle...
05 Sep 2011 00:43
Thats an awesome writeup!
1976 KA900. VM28 pumper carbs, K&N pod fiters, RC performace 4/1 exhaust, Dyna ignition, Accel coils and wires, Ohlins rear shocks.....more to come
Please Log in or Create an account to join the conversation.
- Chaotic Reason
-
- Offline
- User
-

Registered
- Posts: 384
- Thanks: 15
Re: Build Your Own Baffle...
05 Sep 2011 02:25
That really is an awesome write up. Quite the ingenious idea. And you're right, it would not fit into a megaphone without LOADS of wadding or something. I've never heard a Kerker to be honest. Or if I have, then I didn't know what it was. I'm new to Kawasaki. I got mine and only got to ride it for 3 weeks before I had to start tearing into the engine, and mine was running the stock 4 into 2's that came on the E-2s. I actually am going to put on some straight pipes and was going to put those inside, that's why I knew about them. But for the megaphone, you can't really beat your idea. Definite thumbs up!
Michael
1980 KZ1000 shaft drive
1980 KZ1000 shaft drive
Please Log in or Create an account to join the conversation.
- Cuff
-
- Offline
- User
-

Registered
- Posts: 132
- Thanks: 6
Re: Build Your Own Baffle...
05 Sep 2011 03:15
Great idea and nice clean work. You knw though, you could have just used the glasspack.:laugh:
Please Log in or Create an account to join the conversation.
- RedlineJunkie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Please Log in or Create an account to join the conversation.
- RedlineJunkie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Re: Build Your Own Baffle...
05 Sep 2011 11:24hal0tw0 wrote: Thats an awesome writeup!
Thanks hal0tw0.
Please Log in or Create an account to join the conversation.
- RedlineJunkie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Re: Build Your Own Baffle...
05 Sep 2011 11:32Chaotic Reason wrote: That really is an awesome write up. Quite the ingenious idea. And you're right, it would not fit into a megaphone without LOADS of wadding or something. I've never heard a Kerker to be honest. Or if I have, then I didn't know what it was. I'm new to Kawasaki. I got mine and only got to ride it for 3 weeks before I had to start tearing into the engine, and mine was running the stock 4 into 2's that came on the E-2s. I actually am going to put on some straight pipes and was going to put those inside, that's why I knew about them. But for the megaphone, you can't really beat your idea. Definite thumbs up!
Thanks Chaotic Reason, I hope I didn't sound too harsh. Sometimes I assume that everyone here is well over 40 and has 25+ years of experience with these bikes.
You might want to re-think the TT style pipes you have in mind. It's going to be a bitch to tune the carbs for them and you'll lose the tuned extraction effect of a 4 into one. Behind every positive pressure wave (some like to think of it as a high pressure slug of gas) is a negative pressure wave. A good 4 into 1 is designed to take advantage of this effect at a given RPM range so the negative pulse will help extract exhaust gases from the next cylinder. Just food for thought is all.
Please Log in or Create an account to join the conversation.
- RedlineJunkie
-
Topic Author
- Offline
- User
-

Registered
- Posts: 129
- Thanks: 2
Re: Build Your Own Baffle...
05 Sep 2011 11:35Cuff wrote: Great idea and nice clean work. You knw though, you could have just used the glasspack.:laugh:
Oddly, I kind of like that, lol! Not my style, but interestingly cool in a "Steam Punk" sort of way.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
