Motor swap questions
- Sweet Back
-
Topic Author
- Offline
- User
-

Registered
- Posts: 160
- Thanks: 0
Motor swap questions
07 Sep 2011 21:32
Well, I finally did it. Ran out to June Lake with the club and about 45 minutes out, she blew a piston. Was doing about 75 and I'm afeared as to what it looks like inside. Pulled the pan and have pieces of piston metal folded over on each other, and many tiny shards of metal. This opens a few doors and one of them is a late 70's KZ900 motor. I'm wonderin what kind of issues I might have, or if someone here was already crazy enough to do this. ANY help, suggestions, mocking, are certainly welcome. Thanks all.
Please Log in or Create an account to join the conversation.
- racer54
-
- Offline
- User
-

Registered
- Posts: 1902
- Thanks: 114
Re: Motor swap questions
07 Sep 2011 21:38
What model bike are you wanting to put this into? If you put this info in your signature, it will help others to know how to answer your question better.
1980 LTD (changed over the years), 1979 LTD (being rebuilt), 1977 KZ turbo and various KZ's in various states of build. KLX110
Please Log in or Create an account to join the conversation.
- Sweet Back
-
Topic Author
- Offline
- User
-

Registered
- Posts: 160
- Thanks: 0
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Motor swap questions
07 Sep 2011 22:20
i would think any 1000/1100 j series motor should fit in there,wouldnt need to be a cop motor
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- baldy110
-
- Offline
- User
-

Registered
- Posts: 2272
- Thanks: 512
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
-

Vendors
- Posts: 7442
- Thanks: 796
Re: Motor swap questions
08 Sep 2011 13:08
sweetback you need another j-model engine.
as it is rubber mounted.
the 900 engine is solid mounted.
you could probably get the 900 engine in there but not without some custom machined parts.
hth,
leon
as it is rubber mounted.
the 900 engine is solid mounted.
you could probably get the 900 engine in there but not without some custom machined parts.
hth,
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Motor swap questions
08 Sep 2011 14:08
Total bummer our KZ brother... 
Several options, used motor for $300-$500 still would require some looking at with possible rebuilds as well...
Get a new cylinder (already bored) with piston/ring kit ~ $700-$800 including shipping.
Have your cylinders bored, new piston/ring kit, again can get pricey.
Or........ considering this can and will run close $1k on ya, go this rooute...
Spare parts galore, build one out of two for ~ the same price...
Note $1k or Best Offer, should be able to pick this up easily for $700/800.... she looks fairly clean and ready to roll for the most part...
Police Special... LA Area
Hope it works out for ya...
OMR
Several options, used motor for $300-$500 still would require some looking at with possible rebuilds as well...
Get a new cylinder (already bored) with piston/ring kit ~ $700-$800 including shipping.
Have your cylinders bored, new piston/ring kit, again can get pricey.
Or........ considering this can and will run close $1k on ya, go this rooute...
Spare parts galore, build one out of two for ~ the same price...
Note $1k or Best Offer, should be able to pick this up easily for $700/800.... she looks fairly clean and ready to roll for the most part...
Police Special... LA Area
Hope it works out for ya...
OMR
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- Old Man Rock
-
- Offline
- User
-

Registered
- Posts: 6071
- Thanks: 225
Re: Motor swap questions
08 Sep 2011 14:11 - 08 Sep 2011 14:17
Almost forgot....
Going from 998cc displacement down to 903cc, you're going to miss that extra umphka...
Going from 998cc displacement down to 903cc, you're going to miss that extra umphka...
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Last edit: 08 Sep 2011 14:17 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- Sweet Back
-
Topic Author
- Offline
- User
-

Registered
- Posts: 160
- Thanks: 0
Re: Motor swap questions
08 Sep 2011 18:13
Yes Mammoth.
I've looked in to a ready to go motor from Hollywood motors, he wants 900. Which really isn't bad. I've seen the damage now. Piston is wedged so, new cylinder, new piston and bearing, 2 valves bent, and I'll be splitting cases to see the shaft and if there is any other damage. Compiling cost now. Broke ass so we'll see. Thanks for the advice.
I've looked in to a ready to go motor from Hollywood motors, he wants 900. Which really isn't bad. I've seen the damage now. Piston is wedged so, new cylinder, new piston and bearing, 2 valves bent, and I'll be splitting cases to see the shaft and if there is any other damage. Compiling cost now. Broke ass so we'll see. Thanks for the advice.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
