77 kz1000 valve check
- crappiehuntr
-
Topic Author
- Offline
- User
-

Registered
- Posts: 43
- Thanks: 0
77 kz1000 valve check
18 Sep 2011 15:31 - 18 Sep 2011 15:57
I recently purchased a 77 kz1000 it has a tick on the top side and pops some so Im starting with valves. I pulled the valve cover off and checked 2 clearances with lobes 180 off had no clearance could not get a .04mm feeler between cam and valve. Did I miss something am i doing this right. I have rotated the engine and cannot get that shimm in anything.
1977 KZ1000
1978 KZ650
1976 KZ900 project
1981 KZ550 project
1978 KZ650
1976 KZ900 project
1981 KZ550 project
Last edit: 18 Sep 2011 15:57 by crappiehuntr.
Please Log in or Create an account to join the conversation.
- bountyhunter
-
- Offline
- User
-

Registered
- Posts: 7245
- Thanks: 338
Re: 77 kz1000 valve check
18 Sep 2011 16:09
sounds like you have no clearance or tiny clearance. If the cam lobe is pointing away from the valve, the feeler gauge should go under. Reach in and see if you can spin the bucket. If so, there is a bit of clearance (not enough, but some). If the bucket won't turn, there is no clearance.
1979 KZ-750 Twin
Please Log in or Create an account to join the conversation.
- crappiehuntr
-
Topic Author
- Offline
- User
-

Registered
- Posts: 43
- Thanks: 0
Re: 77 kz1000 valve check
18 Sep 2011 18:14
Most are loose a couple are tight I have to go to a birthday party then will see whats in it for sizes. thanks for the help it just threw me when I couldnt get the smallest gauge under anything.
1977 KZ1000
1978 KZ650
1976 KZ900 project
1981 KZ550 project
1978 KZ650
1976 KZ900 project
1981 KZ550 project
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
