1982 kz1000 ltd - compression too high?

  • fierostetz
  • fierostetz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • I'm RAD
  • Posts: 18
  • Thanks: 0

1982 kz1000 ltd - compression too high?

01 Oct 2011 20:51
#480841
With oil, compression was 175 225 222 178

Any thoughts? Do I need to worry? Any input welcomed- thanks!

Without oil, spread was 148lo to 175hi

Please Log in or Create an account to join the conversation.

  • Gary - K7GLD
  • Gary - K7GLD's Avatar
  • Offline
  • User
  • User
    Registered
  • 1983 1100LTD
  • Posts: 135
  • Thanks: 17

Re: 1982 kz1000 ltd - compression too high?

01 Oct 2011 22:17
#480848
Looks a little too wide a spread, both ways. On the test with oil, any chance some cylinders got more oil volume than others, affecting cylinder volume and ring sealing?
John Day area - Eastern Oregon
Restored 1983 Kawasaki 1100LTD

Please Log in or Create an account to join the conversation.

  • fierostetz
  • fierostetz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • I'm RAD
  • Posts: 18
  • Thanks: 0

Re: 1982 kz1000 ltd - compression too high?

01 Oct 2011 23:00
#480855
Thanks- it wasn't a precisely measured amount of oil- it probably caries by several cc's. I'd just skinned a knuckle and was in "dammit" mode ;)

Please Log in or Create an account to join the conversation.

  • Patton
  • Patton's Avatar
  • Offline
  • KZr Legend
  • KZr Legend
    Registered
  • Posts: 18564
  • Thanks: 2103

Re: 1982 kz1000 ltd - compression too high?

01 Oct 2011 23:12 - 02 Oct 2011 01:48
#480859
Would first assure valve clearances are within specs, and then re-test compression.

Next step, if necessary, would be a leak down test.

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 02 Oct 2011 01:48 by Patton.
The following user(s) said Thank You: wireman

Please Log in or Create an account to join the conversation.

  • fierostetz
  • fierostetz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • I'm RAD
  • Posts: 18
  • Thanks: 0

Re: 1982 kz1000 ltd - compression too high?

02 Oct 2011 00:45
#480877
Thanks- spent some time calling around to see if I can't find a leakdown tester. All incould find locally was harbor freight and it only goes to 15psi

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: 1982 kz1000 ltd - compression too high?

02 Oct 2011 00:53
#480879
i wouldnt worry about the leak down tester,just adjust the valves.
theyre all plenty high without the oil B)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

  • fierostetz
  • fierostetz's Avatar Topic Author
  • Offline
  • User
  • User
    Registered
  • I'm RAD
  • Posts: 18
  • Thanks: 0

Re: 1982 kz1000 ltd - compression too high?

02 Oct 2011 01:19
#480884
Thanks :) it's all looking pretty good. Burns a bit of oil, since compression is ok I'm thinking valve guide seals. Tore apart the carbs, they're in great shape. Made new plug wires, may be back on the road tomorrow :) thanks for the input!

Please Log in or Create an account to join the conversation.

  • wireman
  • wireman's Avatar
  • Offline
  • User
  • User
    Registered
  • The most interesting prick in the world
  • Posts: 4736
  • Thanks: 299

Re: 1982 kz1000 ltd - compression too high?

02 Oct 2011 12:21
#480928
:)
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.

Please Log in or Create an account to join the conversation.

Moderators: Street Fighter LTD
Powered by Kunena Forum