Mikuni Carb ID
- Parachutist
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Mikuni Carb ID
02 Oct 2011 14:35
Can anyone confirm that these are VM26's? They were pulled off a 1976 KZ900. Thanks.
Attachment MIKUNICARBS.jpg not found
1979 KZ650D2 SR (with coil mod)
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: Mikuni Carb ID
02 Oct 2011 15:41
okay i'll bite...i believe you have right there sir the holy grial of old school carbs..29mm smoothbore mikunis.......
patton has good pics of the throats and it would not hurt to post a rt/lft/frnt/top ect...pic
what do the two side measure i.d
patton has good pics of the throats and it would not hurt to post a rt/lft/frnt/top ect...pic
what do the two side measure i.d
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Mikuni Carb ID
02 Oct 2011 15:57
can you post a right side view?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
-

Registered
- New and improved - extra strength
- Posts: 8019
- Thanks: 236
Re: Mikuni Carb ID
02 Oct 2011 16:13
wireman wants a picture of your right side ? :whistle: :whistle: :whistle: :whistle: :whistle:
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- Parachutist
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Re: Mikuni Carb ID
02 Oct 2011 16:36
Ok, so here is what pictures I have.
Attachment MIKUNICARBS_1.jpg not found
Attachment MIKUNICARBS_2.jpg not found
1979 KZ650D2 SR (with coil mod)
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Please Log in or Create an account to join the conversation.
- Parachutist
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Re: Mikuni Carb ID
02 Oct 2011 17:05
So I am about to buy these from a guy that has no clue (just wants them out of his garage) and the guy measured them at 1 5/8". I don't think he is familiar with the metric system so I just did some quick math based of his measurement. Assuming his numbers were accurate this puts the throat at a little over 41mm. Is this possible?
1979 KZ650D2 SR (with coil mod)
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Please Log in or Create an account to join the conversation.
- Parachutist
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Re: Mikuni Carb ID
02 Oct 2011 17:32
Ok, one more update. Just had him measure again and he said the throat was 39mm. Sound a little closer to a carb mikuni might make? I guess this isn't the 29mm carbs you all were talking about after all.
1979 KZ650D2 SR (with coil mod)
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Please Log in or Create an account to join the conversation.
- DFIGPZ
-
- Offline
- User
-

Registered
- Posts: 615
- Thanks: 121
Re: Mikuni Carb ID
02 Oct 2011 17:59
He needs to measure the front side of carb id opening [ meaning the id side where they fit in to the inlet manifolds ] they do appear to be 29mm but cannot confirm w/o a measurement.
1984 750 Turbo
Please Log in or Create an account to join the conversation.
- etbike3135
-
- Offline
- User
-

Registered
- Posts: 379
- Thanks: 50
Re: Mikuni Carb ID
02 Oct 2011 20:55
Go ahead and buy them. If your looking for a set of stock carbs for a 76 then Ill trade you those for 4 sets of stock 76 carbs.
1973 Kawasaki Z1
18 years in dragbikes
18 years in dragbikes
Please Log in or Create an account to join the conversation.
- Parachutist
-
Topic Author
- Offline
- User
-

Registered
- Posts: 26
- Thanks: 0
Re: Mikuni Carb ID
02 Oct 2011 21:46
Just heard back from him and it was 29mm (I bought them an hour ago). So are these called VM 29's then? Curious why these carbs are so hard to identify? I would think they would have something etched on them but I couldn't find anything on my VM24's either.
So my next question is will these fit into the inlet manifolds on my 650?
So my next question is will these fit into the inlet manifolds on my 650?
1979 KZ650D2 SR (with coil mod)
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Kirker 4 into 1 w/ baffle
VM24s with Velocity Stacks and K&N Filters
Please Log in or Create an account to join the conversation.
- toad
-
- Offline
- User
-

Registered
- Posts: 196
- Thanks: 7
Re: Mikuni Carb ID
02 Oct 2011 22:04
I always check for a tiny square on the side of the carb, as well notice the weight difference.good find
78 kz 1000
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
wiesco 1015
29mm smoothbores
gs1100 swingarm
gsxr rear
The following user(s) said Thank You: wireman
Please Log in or Create an account to join the conversation.
- wireman
-
- Offline
- User
-

Registered
- The most interesting prick in the world
- Posts: 4736
- Thanks: 299
Re: Mikuni Carb ID
02 Oct 2011 22:41depends on what year of 650 you haveParachutist wrote: Just heard back from him and it was 29mm (I bought them an hour ago). So are these called VM 29's then? Curious why these carbs are so hard to identify? I would think they would have something etched on them but I couldn't find anything on my VM24's either.
So my next question is will these fit into the inlet manifolds on my 650?
posting from deep under a non-descript barn in an undisclosed location southwest of Omaha.
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
