Valve spring compressor
- JanTaliban
-
Topic Author
- Offline
- User
-

Registered
- Z750 LTD Twin -83
- Posts: 45
- Thanks: 0
Valve spring compressor
03 Oct 2011 20:18 - 03 Oct 2011 20:30
Do you think this idea of a valve compressor for use with the head on will work?
Make an rectangular shape, open in one end like in the picture attached, drill a hole and thread it with M10x1,5. Take a M10x1.5 threaded rod which goes in a oxysensorsocket, they are open so you can reach the valve keepers. Weld two pieces of steelrod on the shape, a bit smaller diameter of the camshaft bearinghole and put some rubberhose on them to match the diameter of the bearinghole. If you look at the picture, I think you understand what I mean. The idea is to fit part of the tool that has the hoses in the cam bearings, put the caps on and fingertight them at first. Then line up the tool with the oxysensorsocket on the valveretainer by skrewing in the threaded rod, then thighten the bearingcaps to the right torque and compress the valve spring so you can get the keepers out. The hoses is there to not scratch the bearing surface. The question is if the bearing caps will stand the pressure when compressing the valve spring? I don't think you will have to compress in much more then when the valve is fully open by the camshaft. I hope I got the picture in the post, never done that before. It's a KZ750 Twin
Make an rectangular shape, open in one end like in the picture attached, drill a hole and thread it with M10x1,5. Take a M10x1.5 threaded rod which goes in a oxysensorsocket, they are open so you can reach the valve keepers. Weld two pieces of steelrod on the shape, a bit smaller diameter of the camshaft bearinghole and put some rubberhose on them to match the diameter of the bearinghole. If you look at the picture, I think you understand what I mean. The idea is to fit part of the tool that has the hoses in the cam bearings, put the caps on and fingertight them at first. Then line up the tool with the oxysensorsocket on the valveretainer by skrewing in the threaded rod, then thighten the bearingcaps to the right torque and compress the valve spring so you can get the keepers out. The hoses is there to not scratch the bearing surface. The question is if the bearing caps will stand the pressure when compressing the valve spring? I don't think you will have to compress in much more then when the valve is fully open by the camshaft. I hope I got the picture in the post, never done that before. It's a KZ750 Twin
Attachment ValveCompressor.jpg not found
KZ 750 Twin -83
Last edit: 03 Oct 2011 20:30 by JanTaliban.
Please Log in or Create an account to join the conversation.
- Motor Head
-
- Offline
- User
-

Registered
- FIX UP YOUR BIKE RIGHT AND CHEAP
- Posts: 5137
- Thanks: 393
Re: Valve spring compressor
03 Oct 2011 22:30
I just posted some of the tools the other day:
www.kzrider.com/forum/2-engine/480866-fouled-plug#481034
And have before as well. So you could search and find a few threads I believe.
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B 6 port built/ light flywheel/ 48 DCO Weber LUV IT! Street Legal Go Cart!
1982 KZ1100 A-2 Shaft just bought it in pieces form 1st owner: Now Running Great! SOLD
1990 Concours 1000 Project bike rough body work: Now Running & Riding!
www.kz1000r.com/downloads/Kawasaki%20KZ1...Service%20Manual.pdf
Please Log in or Create an account to join the conversation.
Moderators: Street Fighter LTD
